My first post!
We recently took our pin out of storage, and there were some display problems. Ribbons all seemed fine, and 3 of the displays worked fine, but one display was dead, and P1+P3 were missing the ones digit (7 digit display).
I thought (hoped) that the main problem was in the display control board, and with the busted display, I jumped for a Pinside replacement...
NOOO! All displays work, but same problem with P1+3. I tried switching up the ribbons (still originals), and the problem does not change.
Any thoughts, oh pinball gods?
IMG_20200110_203907596 (resized).jpg