Colorado Springs, CO
Good going! I am also tearing my addams family down at this time. I can only work on it an hour or so a day, so I'll be taking it slow. I've done this to several playfields, so nothing new to me. There is only one ramp on this machine so it's really not too bad. Other machines with interlocking ramps are more of a pain. If you mess with the swamp sheet metal below, be sure to get all the subway ramp, gates, and switches lined up, or the ball gets stuck. A couple of the VUK on my machine had broken welds, so I drilled them and screwed them back together with tiny screws and nuts. This machine is alot easier to take apart than scared stiff, believe me!
(Topic ID: 29975)
Vancouver, BC
Auckland, NZ
