Can anyone point me in the right direction to get a good deal on a NIB ocktoberfest
Thanks all
You're currently viewing posts by Pinsider peteuk.
Click here to go back to viewing the entire thread.
Thanks
Looking like I will pull the trigger
Anything Else I need to ask the dealer about?
Are there any musts for ocktoberfest?
Pin is on way
However due to delays at AP it is coming from a different dealer ... no worries there.
However to be ready I downloaded the new code but on transfer to USB I get an message
Game code has properties that can’t be copied to new location
Do I still continue
Any ideas on this?
Hi all
Downloaded to a different computer and transferred to usb with no error
May have been that initially used work pc which may have some security setting to stop transfer to a usb stick
Hi All
Me again
In anticipation of the arrival I was sent the updated coil stop to install
Question - should I also need / require the lock down spacers fix?
Is this something I should reach out and request?
Thanks
Help a newbie
Ok all
Set up the new pinball
Turned on and it lights up and beeps but then nothing
Any thoughts ideas
Thanks
Hi All
Now in the club
After a couple out box issues now sorted
Playing well.....
One question to start
While playing my lock down bar comes loose
The handle when tight is pointing down to the 6 oclock position behind door and seems tight
Also the bar is tight to the side rail on the left side but a gap of approximately 1/8” on the right
When it comes loose and open door the handle hits the door on opening
Is this correct?
You're currently viewing posts by Pinsider peteuk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/oktoberfest-owners-10-?tu=peteuk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.