Oktoberfest
American Pinball, 2018You're currently viewing posts by Pinsider fightnightfz.
Click here to go back to viewing the entire thread.
Two adjustment helps needed:
1.) From time to time my food tent drop down continuously goes up and down a few times.
2.) The ball goes flying down the food tent ramp almost always hitting the glass and flinging down the left out lane, what adjustment should I make?
Quoted from Ferret:Try coil adjustments for both of these... for the first issue, slightly increase the coil power for "Drop Target". What you describe can happen if there's not quite enough power to lock the drop target in place when resetting it.
For the second issue, try decreasing the coil power for "VUK". You want enough power so the ball consistently gets up the vertical and onto the horizontal wireform, but no more power than that. At that point, if balls still fly off the rail instead of dropping cleanly into the inlane, you might need to slightly bend the wireform... contact American Pinball Support for help with this. <https://www.american-pinball.com/support/service/>
Thank you! I was able to get the drop target issue fixed, but it looks like I have to contact support about the wireform.
You're currently viewing posts by Pinsider fightnightfz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/oktoberfest-owners-10-?tu=fightnightfz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Queen Creek, AZ