Quoted from GPS:Oh Carp
You're currently viewing posts by Pinsider zippydapinhead.
Click here to go back to viewing the entire thread.
It could be just a switch out, F-14 will come up with that error if a switch hasn't been activated in a certain amount of games. Could just be a wire come loose on it is all. You need to open her up and look about.
yes
Quoted from vid1900:Put the game in switch test mode.
Press the skirt around the bumper and see if the proper number registers on the display. Are all the other switches on the playfield working?
If yes, then you are probably OK.
If no, then take the balls out, lift the playfield and physically examine the switch, wires, diodes, caps, contacts - report back with pictures.
What Vid said, he's the f-14 guru around here!
Check the wiring around the non registering switches, jiggle them good, sometimes a solder joint comes loose but they look ok to the eye.
You're currently viewing posts by Pinsider zippydapinhead.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/oh-carp-mt-f-14-just-took-a-dump-on-me-help?tu=zippydapinhead and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.