Quoted from centerflank:Perhaps you need to bring it here for a full shop job then.....but maybe it doesn't need it with the 26 plays you've put on it.
SHAZAM!!!!!!!!!!!!
True that! Super minty fresh!
Quoted from centerflank:Perhaps you need to bring it here for a full shop job then.....but maybe it doesn't need it with the 26 plays you've put on it.
SHAZAM!!!!!!!!!!!!
True that! Super minty fresh!
cliffy that up bro!!
Quoted from retired_user_101:what's up with all these extra balls on tron ?
tron-pin-extraBall.jpeg 204 KB
ron-j.jpeg 11 KB
I wish I had a pinsider offer that up to me. now that is a good buddy right thar!
Quoted from centerflank:Can I drive up soon and wax it for you and install the mod? I need to grab LOTR from Hilton soon anyway. (when the weather isn't skull bashing us)
Quoted from bangerjay:Eh ?
image-832.jpg 201 KB
I need to be able to mash the thumb up 90 times on this post. Robin, fix it.
i just made a mess in my pants
Quoted from centerflank:That was not the most pleasant project swapping the rails and installing the EL paper....but looks pretty sweet!
DSC09959.JPG 197 KB
DSC09960.JPG 208 KB
DSC09962.JPG 250 KB
DSC09961.JPG 250 KB
Quoted from centerflank:That was not the most pleasant project swapping the rails and installing the EL paper....but looks pretty sweet!
I see the "Tron Legacy" title 4 times in the first picture. I think you've out predator'd predator.
Reading this thread makes my mods seem pedestrian. But I'm still just getting warmed up! So far on my LE I've got:
Kimball's LED backbox
Kimball's LED flipper buttons
Kimball's LED recognizer (working off the motor voltage)
Kimball's speaker LED set
Pinbits colored protector set
Pinbits pop bumper caps
Cliffy's full protector set
Eric's mini-cab
Flynn's sign
Full Flipper Fidelity speaker kit with Polk sub amplifier ONLY (FF sub runs off Polk amp)
I have the Hallmark light cycles ready to install, but still need to do that (had to glue a broken arm back, so decided to wait tonight until that set).
I can't decide if I want to do a ColorDMD on it or just switch to a blue DMD.
Also have a car amp I'm going to try swapping out for the Polk amp to see if that same level of quality can be done a lot cheaper. We'll see. I think so.
I have one of the older volume up/down rocker switches made to go in the Tournament button hole and wire inline on the coin door, but newer Sterns don't have the plug anymore than you need to go between. So I'm going to figure out a way to make that work anyway, as I really want an external volume control.
My recognizer arm was REALLY ugly with some fairly significant looking corrosion out of the box. Gonna pull that and probably just do a nice flat black paint job on it. Thinking it would look better "gone" than "standing out" somehow, and thus the black. Open to other thoughts here.
Probably going to do under-cab lighting. Haven't decided if I want it tied to something on the playfield or just a solid color. I'm really thinking solid would be fine, but I kinda wanna play with a Pig2 anyway. So not sure here yet. Thinking a Pig2 would be better for the light cycles rather than lit up all the time, too.
Oh man, so many possibilities, so little time...
--Donnie
Quoted from centerflank:That was not the most pleasant project swapping the rails and installing the EL paper....but looks pretty sweet!
What was the issue in swapping it? Curious because I am picking up a blue armor set (with EL backlight already installed). Was the swapping of the siderails / hinges an issue, or adding the EL light?
Looks awesome by the way!
Holy Crap, check my old disc out! Thanks to Dagron9 stopped out to play some pins and brought me a replacement disc with the clear rubber! WoW that ball fly's around, TrilogyB and I just played a game, it was flying out so fast it was ricocheting all the way through the Quorra+Gem lane, NICE!
Quoted from centerflank:replacement disc with the clear rubber! WoW that ball fly's around,
AH yeah that clear rubber disc is awesome ! Wish I had more time to play .
OK, it's official! CenterFlank now loves Lamp more than Tron.
Found this last night on Ebay:
ebay.com link: TRON Pro Pinball Machine Heavily modified
Say it ain't so CF!
Now, is it because of Lamp, or because of Luci?
That is it, I am going to go change my original vote. Must mean Luci has stolen his heart and has him by the balls.
Quoted from PC-Pin-NC:OK, it's official! CenterFlank now loves Lamp more than Tron.
I think he's taking a the "If someone will pay me this crazy amount for it, they can have it" page from the CaptainNEO playbook.
I actually think it is reasonably priced given all the time and $$$$$ he has put in to it. How much are LEs going for recently? This seems like a relative bargin compared to those and I personally think it looks better with all the sweet 1 of a kind mods. Flanker, are you willing to sign it along with the sale?
Quoted from Whysnow:Flanker, are you willing to sign it along with the sale?
Yes, under the Apron instruction card, I will do that before it leaves.
Quoted from Whysnow:I actually think it is reasonably priced given all the time and $$$$$ he has put in to it. How much are LEs going for recently? This seems like a relative bargin compared to those and I personally think it looks better with all the sweet 1 of a kind mods. Flanker, are you willing to sign it along with the sale?
No it's not reasonably price whatsoever lololol. I have lots of mods on mine, shaker, sub, Flynn sign, Eli kit, light cycles, arcade mod, etc. Mine was mid 6000CAN...
Center is obviously selling at "Neo" price...
I have no idea what total mods are on it but I bet it is nearing 3000 in mods? Many of those appear to be completely custom and 1 of a kind?
Tron is out of my price range but seems that people go nuts over sweet modded out examples. Hell, just because flanker owns it makes it worth more. The guy is Legend ary.
Quoted from Whysnow:The guy is Legend ary.
Its hard to argue with the solid points you bring up.
Quoted from hassanchop:Wait a minute! Are you selling your Tron???
I listed my TRON FS on Ebay for 11K....for a few reasons
1) The 10K by christmas slogan shall become obsolete
2) I want to buy an factory stock TRON pro and do it all over again
3) Prove once and for all the Pro version is better/more valuable than the LE. <--- just mess in
Lets be honest, my price seems pretty fair when you consider I put fresh rubbers on the flipper bats the other day.
Edit----sorry, the announcement was done in another thread by Aurich, that guy watches Ebay like a Hawk!
Post edited by centerflank : forgot to add something
Quoted from centerflank:2) I want to buy an factory stock TRON pro and do it all over again
I am officially you number one fan, starting now.
Quoted from PC-Pin-NC:Found this last night on Ebay:
ebay.com link » Tron Pro Pinball Machine Heavily Modified
So does this mean you are gunna get kicked out of your own fan club?
https://pinside.com/pinball/forum/topic/centerflank-fan-club-members-only/page/2#postbox
Quoted from Concretehardt:So besides a pulse... What does a lowley Pinsider like myself need to qualify to become a member of this elite club?
Quoted from centerflank:A TRON in your collection.
Quoted from Concretehardt:So does this mean you are gunna get kicked out of your own fan club?
Start a thread with a poll otherwise Im not going anywhere!!!!
Besides, Who is to say I dont already have a NIB Pro laying around
Post edited by centerflank : to appease grammar/spelling police
Centerflank you put Tron on the map my friend! It wasn't even cool to own Tron until you got one...
Used to be like... You ain't cool unless you pee your pants and now its like you ain't cool unless you pee your pants and own Tron.
when the tron pin was first announced i was really hoping and praying for something like this...... black light reactive, inserts would glow, ramps might glow, glow, glow, glow. i was still happy with the light up ramps, but dammit it coulda been HUGE with the possibility of uv reactive pf art/etc.
Quoted from centerflank:That was not the most pleasant project swapping the rails and installing the EL paper....but looks pretty sweet!
DSC09959.JPG 197 KB
DSC09960.JPG 208 KB
DSC09962.JPG 250 KB
DSC09961.JPG 250 KB
Those rails and brackets look sweet. Picking up a Tron this week, are those pieces one offs, or are they available?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/official-tron-lovefest-thread-i-love-it-more-than-lamp/page/33 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.