Just received phone call from R +L Carriers. Were 1 hour out. Premium will be here soon. $¿!+ about to get real.
You're currently viewing posts by Pinsider spiderpin.
Click here to go back to viewing the entire thread.
Just received phone call from R +L Carriers. Were 1 hour out. Premium will be here soon. $¿!+ about to get real.
Quoted from insight75:Ugh man. I'm so sorry to see that. Did you refuse delivery?
I'm not an owner yet. The way the box looked and the wet side was I couldn't accept delivery. My 10 year old niece came from 2 doors down because she could see the damage from her house.
Quoted from flynnibus:and the massive 'faked' box portion they put on and taped on the box. That's a horrible attempt at 'fixing things up'. Pathetic! Hopefully your turnaround isn't too bad to resolution!
Yes I noticed that patch job too.
Quoted from Spacemanratso09:Been reading through the rules on pinwiki this weekend a little had some free time
Fuck this game is deep
But that’s ok ha ha
I was trying to learn how to maximize jackpots on multiballs since I really didn’t know wtf was going on otherwise but I could get multiball
Just starting to figure how to finish each quest still trying to figure what to do with the gems once I acquire abilities
I have to admit,at first,when reading the rules,it can feel a little frustrating but when you go play a little and keep referencing the rules and play more it looks like some things are becoming clear and at the same time I think ,“god damn man this is a players machine”
This game has everything it really does whether you like the game or not it’s not objective just fact .
Figure I can learn the gem modes and how best to beat them,then figure how to use them
Then figure on all the rest of this ha ha
So,so much here love it
I’m no genius and I don’t find the rules hard to understand at all if you just give it some of your free time
Not sure if you seen this, if not it will help.
https://pinside.com/pinball/forum/topic/avengers-for-dummies-complete-tutorial-stream-and-flashcards
Quoted from BallyKISS1978:Received my pro today. Got it unboxed and set up. Turned game on and it shipped with 1.02 code. Then got message node boards 1 8 9 not found.
Reseated all connectors and still same issue. Decorate to do a fresh install of the code onto the SD card. Formatted the card and went to download code.
Well online only 1.01. Had to use it since I already formatted it. Put the SD card I’m still got the error message but loaded some video before I got the node message.
Turned it off and back on again. Found the node boards and initialized them. Game works now and plays great. So glad I picked it up.
Now can’t wait for Godzilla.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Wow, your box looks great. If my box last Thursday would have looked like your. Well I would add it to my collection.
Quoted from BallyKISS1978:Yeah yours was horrible. I felt so bad for you. What did your distributor say?
Asked if I even looked in box. That he seen boxes look worse than that and there was no damage.
Quoted from Spyderturbo007:This showed up at my house today. [quoted image]
Looks like one side of the box, no top or sides to it. Something not adding up.
Quoted from scottslash:Sorry, but 172 pages is a lot!
Have computer read it to you as you sleep, you'll take in all information by morning.
Quoted from PinRat:I've been struggling to find the right one there but I'll keep at it
Look at Pinball Life post.
Hope this helps.
Trying to go from 1.02.0 to 1.06.0. file does not download as a zip file, Is this correct? So I install file that was downloaded. See pic. I'm selecting Update: QUICK / Verify: YES And get this Failed screen. Should I say "NO" for verify.
Thanks for the help
Quoted from Spiderpin:Trying to go from 1.02.0 to 1.06.0. file does not download as a zip file, Is this correct? So I install file that was downloaded. See pic. I'm selecting Update: QUICK / Verify: YES And get this Failed screen. Should I say "NO" for verify.
Thanks for the help
[quoted image][quoted image]
I gave up. Turned machine off. Turned back on to make sure I still had a working pin. It did in fact update to 1.06.0 , thanks just the same.
Quoted from spicekabay:shooter assembly is currently somewhere up in the air between Memphis and Europe.
[quoted image]
Just passed over Bermuda now, shouldn't be too long now. You have some nice Mods awaiting you machine. Enjoy
Quoted from vikingerik:Elwin knew the game had problems with flippers overheating, so that's why the Soul Gem mode is limited flips, to make you give them some time to cool down!)
It all makes sense now!
After seeing the pop bumper sanctum getting broke I added a fluorescent yellow plastic protector under it last night before it happened to mine.
https://pinside.com/pinball/forum/topic/the-aiq-pro-sanctum-protector-
PXL_20230317_014239232 (resized).jpgQuoted from cam24175:I see your pictures but do not quite understand what part you are referring to that can get broken.
Plastic # -18 Pop Bumper, above Sanctum target and below the "Extra Ball" "Add A Ball" and "Spot I-R-O-N" plastic.
See picture in this post.
https://pinside.com/pinball/forum/topic/official-avengers-infinity-quest-owners-thread-pinsiders-assemble/page/235#post-7467206
Quoted from Needmorcowbell:Has anyone installed the plastic protector kit from Mezel Mods?
I’m having an issue … I believe the plastic is missing a hole.
The original plastic gas 3 holes but the protector only has 2 and won’t fit over. This is for the right side.
Am I missing something stupid?!?
Thank you
[quoted image][quoted image][quoted image]
That protector is for the Pro. Pro has two holes Premium has three.
Quoted from C0untDeM0net:I've found out the negative side of the surprise. I had agreed to 13 dollars for the part (what marco has as the price https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=510-7815-18) plus 10 or so in shipping when I talked to the distributor for the original plastic. I was not informed there was a change and now I get an invoice for more than $50. 20 for the kit and $30 for freight shipping of a tiny box. It's insane. They said I have to pay double shipping because it shipped from stern to them and from them to me. I would never had agreed to that.
Yes, Marco charged me like $17.50 for a part the size of my fingernail once.
Quoted from Kolk1:Need help finding a part. Have a pro, and the bolt broke for Dr Stranges spinner… any help? Thanks.
Page 58 of Pro manual shows part to be.
Part # 237-5510-00 screw 6-32 X 1-1/2" PPH MS
Quoted from livetowin:Picked up a pro, needing a new coil sleeve I believe as the upper flipper won’t return to original position after it’s been played for so long. Anyone know the correct size?
On page 45 of the game manual lists the coil sleeves as part #545-5388-00
Quoted from Ryancaseystudio:Hey guys. Looking for a part number for this post in front of the BW ramp. Looked through user manual and couldn't find any actual standard post PN. Pictures shown are with the rubber off and on. (Purple post)
Thanks y'all!
[quoted image][quoted image]
See if this helps.
https://www.pinballlife.com/metal-post-with-10-threaded-base-6-32-threaded-female-top.html
I have a topper if anyone is interested.
Anyone know where I can purchase, Stern Pinball Flipper Mini Coil, #090-5092-00
It's for the TOWER magnet in AIQ. Some magic smoke came out the tower.
I checked PBL and Marcos, I also checked Stern's website.
Thanks in advance
Quoted from Spiderpin:Anyone know where I can purchase, Stern Pinball Flipper Mini Coil, #090-5092-00
It's for the TOWER magnet in AIQ. Some magic smoke came out the tower.
I checked PBL and Marcos, I also checked Stern's website.
Thanks in advance
Exchanged emails with Terry, and he told me,
(we forgot to relist them on our site.)
https://www.pinballlife.com/avengers-infinity-quest-tower-magnet.html
You're currently viewing posts by Pinsider spiderpin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/official-avengers-infinity-quest-owners-thread-pinsiders-assemble?tu=spiderpin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.