Anyone get a ship confirmation on a Premium yet? I haven’t yet but it has to be soon I hope
You're currently viewing posts by Pinsider dahawk007.
Click here to go back to viewing the entire thread.
The .92 update file from the Stern website is only one file and not a zip file? Is this correct? I’m opening my new machine tomorrow and just want to be prepared to update
Just unboxed my Premium last night. Just had the Hulk switch adjustment and I need to level my spinning disc some otherwise game is working perfect.
Question for owners about the top flipper. On my game when the ball drops to the upper flipper after the gauntlet shot if you don’t flip it goes straight down the middle. The feed out of the avengers tower goes the right flipper just fine. Is this normal?
Yeah the pops and center ramp are dangerous areas but my kids forget to use the upper flipper so they lose so many balls down the middle after the gauntlet shot
Quoted from dbb143:Myself and a few others have seen this (though not too often and inconsistent for me so far). I have the PDF for the adjustment procedure someone emailed to me, not sure how to post it publicly though.[quoted image]
I am able to lower the disc just fine but from right to left it is lower on one side vs the other. What’s the best way to straighten it out? First game I have had with a mech like this. Thank you in advance.
82FDB476-074C-4BE3-8445-BDAA5924579B (resized).jpegE9912645-CB90-43B8-B6F6-2B86F44A60AC (resized).jpegQuoted from awesome1:Download the adjustment pdf... click on it, it's several pages long.
https://pinside.com/pinball/forum/topic/official-avengers-infinity-quest-owners-thread-pinsiders-assemble/page/36#post-5924517
I looked it all over and I did lower my disc a little but it’s unbalanced. It’s higher nearer the post. I may message Stern about it before I take the whole thing off.
Quoted from J85M:Okay I can’t seem to get this disc level, heights perfect but only on one half, anyone been able to level it so the whole disc is flat and level with the playfield?
Same issue I have too. I emailed Stern about it today. No one here has posted any info yet about it
Quoted from TomGWI:For some reason the LE a code keeps failing to download for me. Anyone else having an issue downloading it?
Yes. I can’t get the Premium to finish downloading either. Probably too much traffic on the site
Quoted from Apollyon:How did you end up levelling your disc? Mine is off the same as yours.
I just got a message back from Stern about the disc. They said engineering has a part number to fix it and they requested my info to send it out. No idea what it is they are sending me
I got a reply back from Stern about the disc not being level. They set up a warranty order for a part to be sent out to fix it and be able to level it. The document attached is what they sent me on how to install it. I hope this helps and that it is ok for me to share this info from their document.
755-7711-00 - Avengers LE spinning disc Bushing Swap - RC3.pdf
Quoted from Eightball88:Thank you for posting this! Why is Stern sending you a replacement bushing, is the one on your disc defective? My disc is slightly askew and I was intending to try levelling it using the existing bushing, but maybe this is the fix(?). The game is playing fine for now, but the back edge of the disc is slightly raised above the pf.
Someone else here was going to try levelling the disc using washers under the mounting brackets but I don’t think we’ve heard back.
By the way, did you know that if you collect a gem but hit antman with change gems lit before placing it, you can place it as well as move any other gems you might have.
I was thinking of trying the washer thing too and was waiting to see others success before I tried it. I’m not an expert at tear downs of components yet. I just reached out to Stern to see what they thought and this is what they sent me. I will update once I get the part to see how it’s any different.
My game plays fine but it’s annoying to have it off like that. Produces some air balls
The newest Loser Kid Podcast had Keith Elwin on and they asked about what all the trophies were about. He couldn’t say other than it is building to something new coming someday. Online trophies???
Quoted from Deyanks98:Here you go. Don’t buy the last one in case I want one. Just kidding.
https://cointaker.com/products/avengers-infinity-quest-topper
Thank you. Forgot to check them.
Oh wow those gel inserts look great. I installed my topper yesterday along with new kenwood speakers, speaker light kits and the PinMonk Sanctum kit.
371EAFE8-481F-4193-B079-239597C780B6 (resized).jpeg89ED6224-28EC-4AFB-9F77-2752ABA7A1A1 (resized).jpegE9A71A43-B636-4260-AF4C-E881ACA0CACC (resized).jpegQuoted from BrackAttack:My Dr Strange portal lock spinner isn't flush with the playfield when it is lowered; it is a little slanted and one side sticks up a little over the playfiled. Is this okay/usual or should I address it? Is the level of the portal spinner adjustable?
[quoted image]
Post #3034
Sorry I don’t know how to tag the post. I’m getting this part from Stern finally on Thursday this week. We shall see
Quoted from Fezmid:Did you call or email stern? Or your distributor? I have the same issue so should fix it.
I emailed Stern. Took a long while to get a reply
Quoted from steele67:Still on the fence with the Topper but had to do this fer under $300
[quoted image]
Is that an autographed pro translite? What light frame did you use? My autographed translite got lost by USPS. Hopefully it is found someday soon
Quoted from steele67:Yes it is, I went with the Stern frame but its about 3" to big so I had to insert some purple at the bottom. I'll move it up the wall should I do the topper[quoted image]
I think you may have ordered the frame designed for the DMD style translite. I have a Stern LCD one for my JP translite and it fit perfectly. I was considering a LitFrames one for my pro Avengers autographed one once it arrives someday.
Quoted from Kevlar:Bumping my own post, has anyone fitted the magic levelling bush?
I have the part but have had no time yet to do it
Quoted from Mando:Anyone get the topper yet ?
I got mine back in mid December. It’s cool for what it is
D6F64355-F694-4726-AFC7-D8979F541855 (resized).jpegI updated the code this morning on my premium and during the first game the disc wouldn’t register any spins. I shut the game down and turned it back on and it worked fine. I was worried that I did something wrong as I changed out the bushing from Stern for the disc leveling issue last week (which did mostly correct my unlevel disc).
I played some games today and could not get the Thanos Attacks mode to start. I collected 2 gems but missed out on the soul one game. The next I missed 1 gem, got the 2nd gem and then the soul gem but the next mode was another gem. When does Thanos come?
Quoted from tdiddy:Working on a CM ramp 3d printed piece if anyone is interested, I'm have more pictures later.
[quoted image]
Cool. Count me as interested. For the first time ever yesterday I had a ball fly through that hole on that ramp. I don’t get a ton of rejects but I feel like I’d have less with a piece in there
You're currently viewing posts by Pinsider dahawk007.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/official-avengers-infinity-quest-owners-thread-pinsiders-assemble?tu=dahawk007 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.