You're currently viewing posts by Pinsider chetrico.
Click here to go back to viewing the entire thread.
Quoted from Fezmid:I don't understand all of these people posting pictures of the box.... if I ordered one, I might even forget to pull the camera out to snap a picture in my haste to move it and open it up!
Waiting for Moose and Rocco to help move it into the basement. But the anticipation is killing me!
Quoted from cooked71:How steep have you got yours? Too shallow and gravity may not be doing it’s job.
Thank you. The bubble is just touching the bottom line so I will increase the slope a little to see if that helps.
Quoted from bgwilly31:Trying to download the .91 code for LE and its not working on the stern website. Anyone else having issues. ?
I am also having trouble downloading the update. Did you figure it out?
Quoted from dbb143:Do you think they ship different balls with the premium/LE's vs. the pros?
I had to replace the Thor lock ball on my LE. The one that came in the machine looked like they found it rolling around the warehouse floor.
This doohickey broke off, so I went to settings and bypassed the portal/subway lock. I think the game might actually be more fun this way. The gauntlet ramp becomes the portal shot with a lot less waiting time. Plus, no need to worry about the inevitable something going wrong with the rising disc. Now I need cool inserts for the subway windows.
20201026_181012 (resized).jpgProbably not all related, but it started with a ball occasionally get stuck right before the vux. A small shake of the machine would knock it loose. Then, after .92 code update, balls would occasionally get hung up on the first and second tooth and would release after four or five ball checks. I thought is was an issue with code and that it would be cleared up on .93. Last night, a ball was hung up on the first tooth and would not release whatsoever. Second ball in just stacked on top of first. Had to lift playfield to access when I noticed the pieces on the bottom of cabinet. It is good to hear that Stern updated build specs on subway. I have always had great service from Stern when it comes to parts and maintenance so I am confident that they will get the subways working as intended.
Quoted from Chetrico:This doohickey broke off, so I went to settings and bypassed the portal/subway lock. I think the game might actually be more fun this way. The gauntlet ramp becomes the portal shot with a lot less waiting time. Plus, no need to worry about the inevitable something going wrong with the rising disc. Now I need cool inserts for the subway windows.
[quoted image]
Well that was quick. Only took a week to get the new subway mech. The dog is even impressed.
20201103_114606 (resized).jpgQuoted from awesome1:Getting close to joining the Billion Club!
After a long day at work, got home late, had dinner... maybe time for one game... first 2 balls = less than 10 million, going to restart and figure I'll try to get some mojo working for ball 3 and it just kept going!
First time collecting ALL 6 Gems! Didn't get to Battle Royale this game though. I think since I did so poorly my first couple of balls some of the "pressure" was off and I just started hitting all the shots. After ~40 minutes I realized I was close to a Billion and of course went cold and my last extra ball was only another 10 million...
[quoted image]
Great job!!!
Quoted from MrArt2u:BAM! Nailed it! 2 of the four were missing. Now they’re all there! Thank you!
Ok, next question, does everyone else’s playfield glass rumble and rattle like you have a super shaker motor in there (and we don’t)?? Is it time for tape on the glass edges? The glass is fairly tight in the channels, doesn’t slide out easily at all as it is.
Place 6 inches of electrical tape along the edge around the top two corners of the glass. No more rattle. I haven't tried this with backglass.
So, having trouble with a couple of my other machines I decided to lower the tilt bob and play the heck out of AIQ last night. Wow, is this machine fun!!!! Making the tilt less sensitive, the out lanes became much more tolerable. This machine should definitely be up there as one of the best ever... right next to Iron Maiden. That said, should I be adding a JP to the collection??
You're currently viewing posts by Pinsider chetrico.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/official-avengers-infinity-quest-owners-thread-pinsiders-assemble?tu=chetrico and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.