Quoted from yancy:You're giving HEP Chris a run for his money.
Haha, is Chris posting food pics?
You're currently viewing posts by Pinsider taylorva.
Click here to go back to viewing the entire thread.
Quoted from yancy:You're giving HEP Chris a run for his money.
Haha, is Chris posting food pics?
Quoted from yancy:Slightly off-topic question for everyone: I have a CPR white-top Centaur playfield (all bare wood screened white). Do you guys think it would look good with white rails, or should I stick to black? I'm not normally a color change kinda guy, but I thought a special playfield might justify special rails.
White might look really sharp. Lacquer is pretty tough so I don't see the ball causing a lot of damage or leaving trails and there are really not that many areas the ball actually comes into contact with the rail.
I am gearing up for my next batch and am going through emails. I currently have 20+ sets in the queue so any new orders will be some time out prior to getting to them.
Quoted from Tsskinne:Don't forget a set for Flash Gordon
I ordered more material today that will be be spun into your FG rails.
Quoted from Ricochet:These rails are freakin' fantastic!!! So glad I purchased them from you! Nice solid glossy coat of paint... they look beautiful!
Thanks man, appreciate the compliment. Felt like Sisyphus starting a new batch today so great reading this. Cheers.
Quoted from djblouw:Did you end up getting a template set for EATPM? If so, put me down for a set.
I still haven’t. I thought someone offered to send in a set but don’t think they did.
Here is my current list. I know I’m missing a couple people, but my email has been jacked up because of my daughter subscribing to YouTube channels.
If you are not on the list please hit me up. I’m traveling a bunch this summer so will probably be off the radar from mid-June to Late August.
Add Radical for HEP, those are incoming.
622418AE-2425-4752-91EC-4FBFADE5CE76 (resized).jpegQuoted from Coyote:Rails arrived!
First thing installed on new-ish playfield!
They are darker than I anticipated (NOT Taylor's fault at all!), but looks fantastic.
[quoted image]
Sorry about the color. It's so tough to gauge with the dye. They look sharp though, thanks for posting.
Started these today and ordered more stock to complete the rails on the list. DH, Magic and Radical are incoming. Once I get these milled, drilled and sanded I am into finishing these and will not be starting any new sets until these are done and out the door.
7GnidftjRXWVIoS8720VEQ (resized).jpgfullsizeoutput_210a (resized).jpegQuoted from Coyote:No worries! Like I said - *I* was expecting a lighter color. Never expected you to match it! Since green was the least-used color on the playfield, I figured the rails would help it stand out. The back ball arch I powdercoated yellow, to match the curve and circle of the yellow on the bottomside of the clock-face. Should look nice once I get it more assembled.
Sounds like it will be a beauty.
Doing a little bluing.
E043A968-074C-4554-8608-3AAFBF4BC048 (resized).jpeg85A8DCCB-819D-439A-84E3-DD0FA93E9E6F (resized).jpegAC355853-4C98-4378-9F6D-609328E64EF2 (resized).jpeg17C13802-417B-4BA3-A127-288236CAA1CF (resized).jpegQuoted from Fytr:Can I order now?
What do you need?
Quoted from Dono:Hello, I’m doing a Mata Hari EM full blown restore, any way I can get on a list for a future batch?
Yes
OMG, all ordered rails are in the works. Pictures are 2xEBD, Magic, F-14 and Firepower B13C4E38-308C-4836-8DC0-26581A21AFFB (resized).jpeg
Quoted from Fytr:Stargazer (Black).
The drawings I have only have measurements for the holes on the bottom of the rail. If cool with that drop me an email to [email protected]
Update: everything is in the finishing stages.
024DD85F-F128-4C1C-8492-D59AA3CE3FE2 (resized).jpeg23233DA8-4BB8-4281-BE42-225239B752B4 (resized).jpeg473121D3-EDED-4DF5-AAE0-98AE347B15AE (resized).jpegHad a great time in Texas and saw a ton of Reese Rails shirts wandering the halls, was really great to see you all out in force.
Update:
All standard black lacquer rails were finished today. These will ship the week of the 4/7 as I’m out for spring break next week. 59F25BE1-8B42-4E50-8C9B-DF8C76C3748F (resized).jpeg306A4E29-9411-4DF4-A9BE-B664B631FBCB (resized).jpeg
Have 4 sets of dyed rails still in the works and hoping to have them done in the next two days. AB9830F8-483F-426E-959D-B40DE05FB282 (resized).jpeg
Quoted from epeabs:A picture of the FG rails installed and in the cabinet. I don't have a newer one yet because I have sanded the cabinet and am in the process of stenciling it.
[quoted image][quoted image]
What a beauty! Thanks for posting!
Updates:
Due to weather, humidity to be exact, rails will be taking longer to finish. Will do my best to accommodate orders but between now and August everything is on a crawl. Thanks for the business this past fall and winter.
Had a great spring break in Asheville, NC this past week.
3DD2D0F3-0DC1-468B-A0F5-E2345A9A2C27 (resized).jpeg
Got back Friday and got these ready for finish over the weekend. Humid as hell today so will hold off until another day for finish.
MM-SG-DH-TOM
CEFCA54E-6119-472A-81E7-3F7898E03DBF (resized).jpeg
Quoted from lordloss:Is congo an option yet?
I don’t think so. Let me check the stack tomorrow.
Update...
Have a set of TSPP packed and ready to ship as customer sold their game.
Been Busy this week.
Taking tomorrow off to get ready for my daughter’s birthday and to play pinball.
Cheers-Taylor
Pics...
Shipped 14 sets this week and have 3 to pack and ship Monday.
73FA065E-6AC7-47E4-9A93-73F19644EB2C (resized).jpeg
5 new sets are finished and now airing D564E76C-E027-47F0-9EF4-F36495953286 (resized).jpegout.
text orders happen
AC8ADD79-949F-444C-8CF4-664D55CB1EA8 (resized).jpeg
Quoted from Jigs:Hey! Can I get in your que?
Yessir and good to see you. Been a while.
Tuesday starts a new batch and the last before a break for Summer. A couple stragglers are coming but early summer travels are going to shut me down.
New list of rails in the works. 4A865F88-02D0-4AF5-AC8F-31316AF32A04 (resized).jpeg
Where they sit as of Tuesday the 16thE6958C4A-C597-4537-B10D-FAD8A6C11793 (resized).jpeg
Quoted from Watkinsd13:taylorva is there a way to get on to this list for a Star Trek: next generation? If not totally understand. Thank you so much.
Shoot me a PM with title of game as subject.
Pick a hole, any hole. ED91793B-1F62-49C6-BF68-406CD95EF9D9 (resized).jpeg
Hole locations have been transferred and I picked up some more material for a set of STTNG and Firepower rails.
Hope to have these drilled and sanded by tomorrow as I have family coming to town so taking the weekend off. 0CFF5029-5328-402B-8ACB-C3CE5EA63876 (resized).jpeg
Quoted from Maide:I would love to get a new set of IJ (Williams) rails, if you have space in your queue.
Going to have to be after this batch. I need to order more stock and that takes about a week.
Shipped BSD, Shadow, TOM, TZ, FH, Centaur, Seawitch, F2K, Diner, Sorcerer, STTNG and TSPP today.
This is my trick for shipping 3+ rails. You can order free triangular “tubes” and have them delivered to your day and piggy back them like this to ship as one package. Probably saves most customers $10-$15 dollars on shipping .
E77745F9-148F-4E3A-995E-3DFF12FB8C12 (resized).jpegQuoted from Atari_Daze:Reese rails going on a Motordome, thanks Taylor perfect fit![quoted image]
Thanks for sharing. Crazy set of rails.
Update:
Rails were made. 7BF560B0-F627-4E87-8B39-3B70ABED7F88 (resized).jpeg
Screen printed this for a silk screening class tonight. DDF547B9-ACBD-422B-8607-EF2AC0E10DCB (resized).jpeg
Me and my kids. 8F572F96-D29A-455F-9E58-EEFA8359AA7E (resized).jpeg
They get out of school June 14th and become my focus for the summer. Still working with some customers on rails but it is slowing down. Thanks for the great year. I tell people all the time that I have the best customers.
Cheers
Quoted from Ericpinballfan:Have a Great Summer with the kids!
Look forward to your return in Fall, hopefully ill be ready to order a couple sets by then.
I like the blue White Water!
Thanks man.
Globetrotter rails have landed.
D9A56CBC-89CF-4984-871B-72FA5A2B932C (resized).jpeg
Update on the EATPM rails. Second coat of dye was a custom mix that gave it a nice grape kool aid look. 8AD9A692-CE39-472D-8399-BB85583334BA (resized).jpeg
After steel wool finished with clear lacquer. A6666BF1-E0A7-45D6-9E93-3DFEEC16ED2A (resized).jpeg
Little batch to hold me over ‘til I reopen.
Another HGx4, Skateball, EATPM, Whirlwind, STTNG
1959E47C-0A6C-4BD6-9725-5E2598B5A19E (resized).jpeg
Quoted from Half_Life:Sportin' my new shirt! Aw yeah!
Thanks Taylor![quoted image]
What’s up stranger?! Been too long. Looking good!
I’m having issues with my email. Trying to sort it out but I know I’m missing some in regards to T2, IJ and FG and BD. Please send to richmondpinball@gmail
Here’s the skinny on my summer. I’m out of the shop as of next week until July. May be able to get in the shop a little in July and then traveling again in August.
I already have a queue started but the reality is that unless I’ve said your rails are in the works they aren’t and I probably won’t be getting to them until maybe July(no promises.)
But all that said today was a beautiful day to spray. 15EA3300-ED08-4E12-9E20-4161B592B7B5 (resized).jpeg
Quoted from dmacy:Those look great Taylor! Did you ship out the EATPM ones yet?
Not yet. Looking at shipping everything early next week.
Quoted from Mayboyz:hi
Can I purchase a set of funhouse rails please
Thanks
Bob
You can, but that said I’m leaving for vacation Friday so please hit me up in July. Thanks.
3 Things.
Shipped numerous sets this week and have reached out to those that have them on their way with tracking info.
I am out of the country for the next couple of weeks so will start up the queue in July.
I have a set of HG rails available if someone wants them. Can ship 6/13 if you contact me tonight.
Hope everyone has a nice break this summer and again thanks so much for the business, and your patience for dealing with the disorganized business model that I run. Cheers- Taylor
Quoted from Half_Life:Enjoy your time away Taylor!
See you when you get back.
Thanks Phil. We have a good one planned. I’ll post a pic or 2.
Quoted from Calfdemon:I will wait to July obviously, but just tore my Judge Dredd apart and would be interested in a new set of rails for it. Do you have JD templates?
Thanks and enjoy your vacation!!
I do have JD. I got you down.
I'm back. Thanks for your patience. I have wood in stock for about 30 sets and have added Barracora to the library.
pinballinreno still want DW, TOM, FH, TAF and IJ?
Mayboyz I am back as of today
blowback1976 still need FG and BC?
Damn, got all warm and fuzzy from the "WELCOME BACK WHERE THE F*CK HAVE YOU BEEN" orders.
In all seriousness, I really appreciate you all. I really have the best customers and it's a humbling experience to be a part of your projects.
I have come across my rails in the wild and that is a pretty cool experience.
I will do my best to keep this thread updated with progress on everyones rails. If you ever have a question please reach out.
Cheers- Taylor
And so it begins......
TAF-AFM-Barracora x 2
fullsizeoutput_2ca6 (resized).jpeg
Here is my current queue.
Any orders coming in will be placed behind this group. Goal will be to have these all ready for finish next week. Humidity looks like it will perfect for finishing. Thanks for the orders and follow the thread for updates in production. Cheers- Taylor
JD- Calfdemon
FH(red)- Mayboyz
TAF- EG
AFM- Dmacy
Barracora x2- FB order
TAF, DW, TOM, IJ, FH(red)- Pinballinreno
FT- Sethman
Wh20- Dbaron
Xenon- Jdissen87
Barracora, Sorcerer- Shimmy Disc
FH(red)- Zerbam
Fathom, FG- Blowback
EATPM-djblouw
FH- Gump79
Quoted from meSz:Tayor, have you done rails for KISS (Bally)?
I have not. Would need them sent in or dimensions. PM if you need my address.
Quoted from Turtle:Everdone Johnny Mnemonic? If so, can I order a set?
I need to check. Will report back.
Quoted from dankme:Hey Taylor,
Did you get my request a little while back? (For a TAF, SS, and Totan).
Just wanted to make sure I was in the queue!
Thanks
I must have missed it, sorry about that.
You are in the queue now.
Transferred all hole locations today for current batch. Tomorrow will route out tapered slots, mill out light scoops and start drilling out holes.
Fun times.2EnJev0ETx+wNzCS73rJuw (resized).jpg
Quoted from BlueIrocGuy:Hello,
Can I put in an order for a set of EBD rails?
Thanks much!
BlueIrocGuy got you down.
Damn it is too hot.
That said these have all been sanded. That means each piece has been sanded on all sides with a random orbital sander and then all edges are softened by hand sanding. Tomorrow I’ll scrape out all slots and then this batch will be ready to be finished.
17954362-FFF9-4AC8-BE17-6F1DCE36E07C (resized).jpeg
The batch I've been working on is all milled and sanded and ready for finish.
The next batch will include the following sets:
F14/BK- Weirpinball
Centaur- Tommy
Xenon- Billrabe
Quicksilver- 20eyes
EBD- Blueiroc
Sorcerer- Kyle 5574
Scared Stiff- Hulagirl
Seawitch- hisokajp
Partyzone-Angus
Was too humid today to begin the process of applying lacquer so got started on the next batch. Roughs are cut and the list pictured indicates this next batch. I will suspend work on these as soon as humidity levels are favorable for finish. fullsizeoutput_2cf3 (resized).jpegFcoQyui6SIeb0BmccIQliA (resized).jpg
Quoted from dankme:Thanks for the update Taylor. Do you also make the pf wood back panels? If so, I can use them for my 3 games order...
I can make them but only have a few to use as a template. They often get returned to the customer. They are a bit of PITA and take some time to finish as I wet sand between coats to get the nicest finish I can get. A couple examples are below. 61C7479D-93BB-4D81-813E-C2852036D572 (resized).jpeg2A70C27B-6BAA-42AD-AB30-A6A2D0BC65DF (resized).jpeg2289578B-95B8-4833-94C1-30D4365D77FF (resized).jpeg
First batch, excepting Fathom as they are getting dyed, in the finishing stages. Sets finished in black have 3 coats, red has had 4 coats and was sanded after the 3rd. Will let these set the rest of the day and then hope to get finals coats on tomorrow.
To be totally honest, this should have been broken up into 2 batches. 10 sets at a time is manageable, with this many sets it’s tough to stay organized and eats up time. After finishing these two large batches I probably will max a batch out at 10.
796CEDB7-9757-4B47-8B0B-9C297A501E10 (resized).jpegQuoted from Rdoyle1978:Wow looking good!
I would absolutely be in for several of those back boards. Are those generally the same per generation of games?
They are all different.
Sanded everything down and sprayed some more. May need one more coat on black which, if needed, I hope to do tomorrow at some point.
Some pics after these last few coats.
261836BA-855B-4903-AFBF-CFFF479BEBAB (resized).jpegCB54F298-A45A-47A4-BCE1-5AD79B350286 (resized).jpegUsually take Saturdays and Sundays off, but I don’t get paid until they ship so here I am. 78F04E92-FB38-41FF-9B15-995013AB0332 (resized).jpeg
Working on transferring hole locations on the next batch. 18254B98-AFA2-4CE9-AC95-1AE655070E3F (resized).jpeg
Some pics of the batch I just finished. 3 sets of FH and 1 of FG in red 4DB16F01-019B-4420-93DE-7BA7DDEBC82F (resized).jpeg.
A4B7AC23-1CE2-4B4B-AE60-77255EC16B90 (resized).jpeg
Classic black always looks sharp. E59EA630-7ED0-47FD-A813-6C0FA5DE4C9F (resized).jpeg
F8B38B35-6C3F-4FF9-976F-FAE5B635BAE1 (resized).jpeg
Quoted from dankme:Looking great!
Thanks. Nice to be back in the shop.
Really appreciate the kind words since being back. I know my business model is a bit weird, but it seems to work.
Just a quick update.
The batch I just finished is sitting prior to shipping. I will be contacting people to get shipping info.
Fathom rails have now been dyed and will be getting clear lacquer as soon as humidity allows.
Next batch has had all holes marked for drilling including a Black Knight which is now in the inventory.
IMG_0728 (resized).jpeg
Quoted from Calfdemon:Im ready as well! I spy my JD rails in the middle underneath. Took my a while to find them but spotted the green tape on one with JD on it to the left. Cant wait!I think yours were in the set u just finished.
I think yours are in the prior batch.
As for shirts. I have to order 20 at a time so will start a list.
Couple shirts in the wild at Pinburgh. 2F73FEFC-4A4D-437B-B937-67BE13BCE342 (resized).jpeg486D396B-5C58-4E8D-A248-5965ABD4BDC7 (resized).jpeg
Had to take Wednesday and today to work on some home stuff, retrofitting a landing on my deck, and finished up some Fathom rail. Will be packing rails for shipping tomorrow.
5560534E-9059-435B-8C03-D9BDD384FE81 (resized).jpegC0D71668-D4B7-4375-ADAD-E7B8FF786CAC (resized).jpegCCF51B27-E412-4141-B5B3-8FD44D800956 (resized).jpegNext batch has been sanded and is ready for finish, just need the weather to cooperate. List pictured is what is in this batch. I have a finished set of TAF rails available as well. 178E51FA-E2CF-4015-94E9-F5F0F1853886 (resized).jpeg2B41DAF9-704B-4271-8237-958E79025C32 (resized).jpeg
And my deck project for no good reason..F5FF63FB-89A1-4B58-A58F-322C86F7D0C3 (resized).jpegA75AF70B-04C9-4FD6-8FC1-1CF99DD0A34A (resized).jpeg
Quoted from yancy:Watch out for that bottom step, it's a doozy.
New treads and railing are going in this week.....wise guy...
Quoted from cosmokramer:Did you back slice that 2x to get that radius, or is that a couple of 1x that was soaked?
It looks great, I'm going to be doing something similar for my landing.
Half Life is spot on about the kerf cuts. I went back and filled them with PL glue and then scraped down.
Update as Friday 10/4
This week kind of sucked for rails, the heat was brutal and humidity and some personal obligations kept me out of the shop. That said I did mange to get several coats of lacquer applied to the current batch. Weather is looking like it's finally turning fall which will help out with the rail making business. Next batch is already full with 10 sets in the wings. Hope to get this current batch out of finish and into milling next batch next week. Have a great weekend. Cheers.
etx39e44TjuhGA5CoyAOCg (resized).jpgQuoted from WeirPinball:I know this is a bit backwards, but trying to finish 2 before the local show. BK is ready waiting for the finishing touch of new rails![quoted image][quoted image]
They’ll be on their way shortly!
As the last batch sits prior to shipping I started up the next batch. Blanks were cut today.
31034C78-F070-4A75-8063-335AA0489771 (resized).jpegQuoted from Atari_Daze:Taylor, can I send you some Stern Magic rails to put into your next queue?
I have Magic. Want them in white?
Power is out in the shop, as we are having some work done On our AC, so decided to spend a couple minutes to go through my template inventory. Currently have 80 sets. I’ll update the master list in the first post with new rails and there may be some pricing adjustments as material pricing has gone up. This of course does not affect orders currently being worked on. Cheers.
08CF1B94-13D7-4CED-9318-306903474349 (resized).jpegQuoted from yancy:With all due respect to your customers, charge more! You work your ass off, deliver a better-than-new quality product, and price certainly isn't a deterrent at this point.
I feel like I charge a fair price and my adjustments are solely on typical increases in material and shipping cost. That is one reason I went to straight shipping cost as that way I never boned myself as I’ve done in the past. I would just guess shipping cost before and lost my shirt on a couple orders.
Update:
BSD, Magic and another set of Joker Poker made it into the next batch. Everything is milled and hole locations transferred.
Nice eclectic batch this go around.
FC818162-F913-45D6-B567-EB34881BD8FC (resized).jpegQuoted from yancy:Argh! I assume from that smile that all is well now.
She is. Was a long day, but surgery went great. Glad we caught it early. I had mine out years ago and it took me forever to get to the hospital. My girl is too tough for her own good.
Quoted from radfordian3505:Hi I would like a set of Harlem globetrotters and eatpm
Pm sent.
First off, hope everyone has a great weekend! Cheers.
Shipped 14 sets today and send out emails with totals. 6844C213-4367-4242-9392-4AE2016B30DA (resized).jpeg
Recently ordered sets of EATPM, Quicksilver and STTNG have been lacquered and will ship next week. You can see those rails on the lower shelf in this pic. Working on a special set of Sorcerer rails that are currently raw until we work on the finish. GmrUmj8vRwq98xRKm08DxQ (resized).jpg
Quoted from lordloss:Keep an eye out for a congo set of rails. I do not have a set, but I have the rest of the playfield..
Will do.
Quoted from Atari_Daze:Recent shipments already arriving, got my Stern Magic rails today.
Thanks Taylor, beautiful as always!
Thanks man.
Quick Quicksilver action today. 76BCE2C0-8D13-462A-A7D7-7E98544B4C8C (resized).jpeg
Had a few orders ship this week and made a set for Quicksilver which will ship early next week. Took the last couple days off and will start back up next week with a couple long-standing projects. Have a great weekend.
Just received some new stock so will be back in the shop tomorrow.
My to do list....
Sorcerer(rails are made, still working on color)
SGx2
Centuar
Catacomb(just arrived)
Fathom
Lady Death(Mata Hari)
Happy Thanksgiving. I’m taking the rest of the week off. Black rails are done, dyed take longer.I fixed Firepower and played Elvira for the first time, what a fun game.
-
-
-
Safe travels and eat well. Cheers.
Post holiday sick kid has had me sidelined this week, but I have a bunch of rails wrapped for shipping and will be contacting people starting tonight. I have had several orders come in and I will be starting those tomorrow. Despite not taking new orders they keep coming and I already 10 deep in my queue, thanks. I will NOT, seriously, be taking on new orders until these are finished. I’m swamped and with the holidays and some travel next week I’m up to my eyeballs.
Ps- I’m now using wax paper for wrapping rails.
0AC7C1A1-3814-4C4D-A0A1-33CFAC44BA07 (resized).jpegQuoted from Atari_Daze:Curious, why the switch?
I have had issues in the past where some paper stuck to the rails. There doesn’t seem to be a reason for when it does. Someone suggested it could be the porousness of the paper I used. I did some research on shipping lacquered boxes and wax paper was suggested.
Started these...FG, Diner, Skateball, 8BD, IJ, FathomX2. Cftbl, HS
039E37C4-A85B-4A4E-98E7-691AA1E30165 (resized).jpegSorry folks, my daughter has been sick(pneumonia) so I’ve been sidelined for the last couple of days. I did get out to work on some rails and have them ready for sanding. Still need to contact people for shipping on last batch.
339A3C4B-00C0-4370-BE09-01ED633B3977 (resized).jpeg257405D0-5867-4019-A2BE-EE434810C4C1 (resized).jpegShipped a lot of rails today. Will be reaching out with totals and tracking #'s. Still waiting on a shipping address for Catacomb rails.
Quoted from Nhpolarbear:Taylor I Hope you daughter gets better quick. It is a nasty flu season.
I enjoyed your Ozzie tribute at the 2 hour mark in your last episode.
Thanks, she is started to do better. Nasty cough still, but fever is going down.
As for Ozzy, man, I got a lot of messages about that. I didn't create a new bed for that epsisode and laid it down on an old one and didn't clean Ozzy off.
Oh well, there goes another chance at a TWIPY, lol.
As for Rail news:
Everything has shipped but Catacomb(finished waiting on shipping info)
Rails in the works:
Diner
FG
Skateball/EBD
Orders are still coming in but not sure when I'll get a chance to start them, might honestly be after the holiday break.
Cheers- Taylor
I have been out of town, nice NYC trip with my wife, so have not kept up with answering all emails. I will be doing that today.
I have gotten a few sets ready for finish. As winter is quickly approaching the work on rails slows so please understand that when ordering. I work when I can, but just can't provide as quick of a turnaround as I would like. Just keep that in mind when ordering.
In the pic we have EBD, Flash Gordon, Skateball and Diner sanded and ready for finish.
IMG_2406 (resized).jpegI believe I have reached out to everyone that inquired about rails. I'm shutting down new orders until after the holidays. I will get on these as quickly as time and weather allow. Thanks to everyone that has ordered this fall, it has been bonkers busy and I have done my best to keep up with orders as they come in.
Hope everyone has a great holiday season and New Years. Cheers-Taylor
My current list:
Waiting on finish:
Shiffdog- Diner
Reznnate-FG.
2Fun- Skateball/EBD
To be started:
Dawscuas-DEJP
DMacy-STTNG
Aukaut-FG
Cary O-TAF
Atlgills-TOM
CanadianPinball-FP/HS
Sorry I haven’t been updating but been busy in the shop. Every rail order will hopefully have final coats over the next three days. I will allow these to sit to cure prior to shipping. Will get them to everyone as fast as I can, but there is a process and it takes time. Thanks everyone for your patience and business.
-Taylor
44DFAD80-810F-4CCF-AEDB-7FC9339E4261 (resized).jpeg
All rails (except for natural finish) have been given numerous coats of lacquer. 65A33641-BFC7-478C-BC97-2C098D122813 (resized).jpeg61875955-74A4-437C-9C49-E6B9911C3727 (resized).jpeg86CE3554-0212-4B3F-9E4A-5293B2400CE3 (resized).jpeg
After those coats everything gets sanded down to knock down the grain and prep for final coats which I will start applying tomorrow. 1E5ABCF5-4C73-4B03-94CF-01DD759A6205 (resized).jpeg
All rails in black were shot with final coats today. The red, white and clear take more time so they are taking more time, but really close.
I have a couple orders that have come in but am taking a little break as I have some personal projects I need to work on. Probably be off from January-February except for those that I have already spoken to.
Have a great weekend.
I’m trying to get orders out as quickly as I can, but I’m waiting on some shipping supplies that were delayed for some unknown reason. Hoping to have everything out this weeks sans a couple clear sets. The cold caught up to me and the windows spraying lacquer are small. Not trying to create excuses, just my reality.
I know I’m behind and really trying to get rails out as quickly as I can. Everything has been wrapped and packed now and will be shipping shortly. As always, if you no longer need or desire the rails I completely understand and is why I don’t take money up front. I’m aware that collections and time are fluid and I don’t always hit the mark.
This is something I need to think about before going forward with making rails. I’ve been at it for 14 years now and the ability to keep up with demand had gotten more challenging. It has been an honor to be a part of so many of your projects, but I think I need to scale back the workload. Over the next month I will do my best to figure out how to do that. Cheers-Taylor
Rails are now wrapped in wax paper for shipping. 16CD1688-1485-47E4-9AA1-4207A33B1A0D (resized).jpeg
Everything packed up. 39CA34D7-0A79-4F3F-9491-B1B5505605A7 (resized).jpeg
Quoted from xeneize:Love your craftsmanship, Taylor - and you're a part of every single one of my restores! Don't ever quit doing your thing!
xeneize thanks for the kind words and long time patronage. Been a pleasure working with you. Cheers-Taylor
Quoted from Fytr:What I love about this thread is the title always says "Closed for the season" or some such and yet Taylor's always shipping product anyway! The "closing" is aspirational I guess!
Yeah, I try.
This is my current queue. If you think you should be on this list hit me up. I think I’m missing a couple people that wanted something. I am a shitty business person. 6579BF3A-8CAD-40BA-B5C2-3CF654A89FB4 (resized).jpeg
Today is my birthday and my wife bought me a piece of art. 886C326C-624B-4C47-9982-8184D59E147D (resized).jpeg
These are ready for finish, well the backboards still need the filler sanded but you get the idea. I have some stock hopefully arriving tomorrow so I can add rails for Cheetah, TOTAN and TZ to this batch.
I will be attending TPF again this year, if there please say hello.
D7A7010E-37A1-4ACF-89F4-5F7E5A2E59CE (resized).jpegQuoted from Peabo:When your ready for new orders, I’m in need of a Quicksilver set
Send me a PM w/ shipping info. Cheers- Taylor
Quoted from Hawk007:I have a congo but i'm quite far from you.
Love my Canadian brethren, but shipping is stupid expensive to you guys.
I added 2x QS and a Comet set to this batch. Not starting anything new until these sets ship.
-
This applies to all orders after of 2/16/‘20
-
If I take your order assume it won’t be started until you see pics of rails shipping.
-
Thanks-Taylor
Quoted from pinballinreno:Do you have bally playboy rails?
I could use 2 sets.
I don’t. Will try to source.
Quoted from lordloss:..how much for the addams backboard?
I’m not sure. I don’t do them that often so need to go back and see what I’ve charged in the past. They are a total pita as I eventually start wet sanding between coats to try to get a nice, almost mirror like surface.
TZ backboard from 5 years ago.
38A8FA2F-FF86-41F6-8F56-50B4E58AB494 (resized).jpeg
Quoted from Coyote:Is that mine? I'm sorry for makin' you go through that. On the plus side - it shines nice. I did NOT cover it with an artwork decal.
I think it was. I like doing them because they look great when done...it’s just the time it takes to get them done.
Worked my ass off this weekend to get rails finished so they can sit for a couple days prior to shipping.
The 2 TAF backboards are not ready, just drying.
I will be contacting people for shipping info the next couple of days.
Finally have a set of Congo rails on the way in from scooter8416
EA68F345-5114-43CA-A76F-53B56533A316 (resized).jpegQuoted from Mitch:Congo rails would look amazing in dark green with the black wood grain.
Yeah, that would be hot. If I had free time I’d make some extra sets like that. All the useable stock that comes through my shop has to go into orders. I’ll try to put some aside to play with dyes.
Quoted from Nhpolarbear:Nice interview with Johnny. Always dig the tunes.
Thanks for listening. He was great to talk to and beyond down to earth.
-
We are recording tonight. If you have any questions feel free to hit me up.
These have all shipped. Still waiting to hear on a couple sets of QS and a Seawitch set. If these are no longer wanted I will post them up for sale.
I still have Skateball set that are packed and ready to ship.
I will be contacting people with tracking and totals today. Taking the weekend off.
9528E720-30E7-472E-8625-E8781721B793 (resized).jpeg760B4503-D587-460E-840D-FE4DE9138EEA (resized).jpegQuoted from lordloss:Thats a pretty legit lineup. Are you at max capacity?
Pretty much. The way my basement is laid out number 11 makes it a squeeze to get by when someone is playing but all the glass can be removed so it works. I do have an EM Soccer Game that I could swap out with a couple pins, but it’s a family favorite.
F3CA5206-B421-43F2-8F11-04E269DB16D5 (resized).jpegQuoted from xeneize:Holy crap! That Bally World Cup is AWESOME! Damn you, Taylor, now I want one!
It’s a blast, and best part is it only set me back $200.
Quoted from Nhpolarbear:It’s a blast, and best part is it only set me back $200.
That’s a steal. The unit must weigh at least 500 pounds.
Did it cost you or someone else their back?
It was a pretty brutal load in. Honestly don’t remember how, but I did it alone.
yancy first, let me say thanks for the kind words. I know I said it before, but it truly is humbling to be a part of so many restorations. I’ve done several myself and am fully aware of what a labor of love it is to bring a game back to a restored and often times better than new state. And I too am shocked by the amount of orders that have passed through my hands.
I wish I had kept an ongoing log if orders, but I’m a shitty bookkeeper.
I need to go through my emails as I knowI have new orders coming in, but I’m really focused on the current batch. With these now ready for finish the process is a bit out of my hands as I become dependent on weather. Tomorrow is suppose to be decent so I’m hoping to take advantage.
Today I finished hand sanding and finishing on all slots so these are all ready for finish.
BA20E2C8-71D3-407C-85C8-3E49B872E186 (resized).jpeg09E37801-12EA-401F-8DC7-F26A4F436C86 (resized).jpegWork as therapy is real.
-
Finished up a number of rails today.
-
I will be contacting people for shipping information this week. If you are unable to purchase because of financial strains just let me know and we can work something out. Hope you all keep safe.
-
Taylor
Quoted from MacJedi:Looks like a lot of rails, Taylor! Keep up the great work buddy!
Cheers,
MacJedi
Thanks man. Be safe.
Knocked down the grain with steel wool and applied a thin coat of dye. I cut it with isopropyl alcohol and that helps with saturation. I buy my dyes from Stewmac and they are marketed for electric guitar finishing.
And yeah, my wife parked her car in my shop. Wtf?
A1D68FAE-2FE1-4BB2-B94F-FD1E2F226FD8 (resized).jpeg65AD8C11-1D92-47CA-BF73-B53DAC41A98E (resized).jpegI’m finding some emails from Pinside in my junk file.
If you are trying to get in touch hit me up at [email protected]
Trying to sort out how to get rails shipped while practicing social distancing. I now have a stamps.com account and will be using that. Rails will be a bit tricky but I’ll figure it out.
Cheers
Rails are wrapped and packed. I’m now set up to ship from home with Stamps.com and am setting up pickup through USPS. I have 8 packages headed out tomorrow and will set up another pick up for Monday.
Be safe.
90381F7B-5C77-4C5B-8401-C14BD50AFD7F (resized).jpeg9985CB25-3934-4F05-86A0-989724D5EE32 (resized).jpegQuoted from Micky:That looks really cool!
Thanks, I use dyes made for staining electric guitars and they look pretty sharp IMO.
I am temporarily closing as my material source has closed due to Covid-19. I have a very small amount of material on hand and have reached out to a few people that had just reached out about a couple orders. I will do my best to find a new source and will obviously update when there is an update.
Thanks to everyone for an amazing run and I hope to continue once we get through this.
Cheers- Taylor
I reached out to a local mill and am trying to see if there is a way to get more stock. Will update if that works out.
Today a set of Congo rails shipped and started QS and IJ. Also sharing a pic of the finish on a couple sets of Fathom rails. These are curing prior to shipping.
@too-many-pins thanks for following. Just shipped a load of rails to Chris so should hold him over for a bit. He’s a big reason why Reese Rails became more than just me making a couple sets for my personal projects. I’ve know Chris for over a decade now and am beyond humbled to be a part of the HEP restoration package, and I really mean that. I take pride in my work and how I run my business and it really saddens me to have to close even if just for a bit....cheers.
@gritty I am going to do my best to get up and running.
@qbass187 I had an order drop out for now so hit me up if still interested.
C44C1226-526C-4583-AD3A-4CD303187948 (resized).jpeg45911ADA-E49F-4A99-A149-16DA7E294FD1 (resized).jpegQuoted from Nhpolarbear:If you can’t make rails you can make more podcasts!
I wanted to let you know what a great job your daughter did on the latest podcast.
You have done a terrific job raising a fine young woman.
She will be running your podcast in no time.
Be safe and be well.
Thanks so much, both my girls blow my mind with their brains and humor. Ella was great and put my interviewing skills to shame. Jon has been a friend for a while and I really just wanted to catch up more than a formal interview.
I did do some work today.
Working on a SS backboard. Chris at HEP sent me one to replicate for one of my customers. I was trying to go off of some drawings, but just too many details to layout.
Also working on 2xTZ, IJ and QS rails. They have been milled and drilled. Will sand and hopefully start finishing tomorrow. Also made carnitas and Cuban potatoes. Ate well. Cheers and be safe.
98CD3CDB-F203-4ABF-AAB0-555CA9E0091B (resized).jpeg0723841B-B145-4121-B479-7B9B183CD8E8 (resized).jpeg121114C9-F863-4458-B22D-1299B1884CB8 (resized).jpeg9C7781E0-0EF6-407B-A761-4716BC848146 (resized).jpegAlright, got some more stock in and taking orders, but there are some restrictions on what I can do.
Rails are limited to finish in black lacquer or raw if you want to stain yourself. This will reduce the price $5 for regular sets or $10 for larger sets like Fathom.
I am limited to using 1/2” stock so cannot supply 1” thick pieces like seen on games
like Sorcerer.
Hit me up.
173B82D4-63D8-49B2-831D-17D0494F9BBE (resized).jpegQuoted from lordloss:He was wearing n95 before it was cool
P95 w/organic for the win!
Quoted from TheArrrrrcade:My custom game. Thanks Taylor!
https://pinside.com/pinball/forum/topic/metroid-pinball
Thank you! First coats of lacquer sprayed today.
Quoted from twinmice:I see my IJ rails in there!! Awesome
Yessir. Should have them done before the rain comes in Saturday.
Quoted from dmacy:Thank you Taylor for all you do. Keep yourself and family safe.
Thanks a lot. It’s been nice having my wife work at home and the kids have been good, but have to say getting into the shop has been a nice way to get distracted. Cheers and be safe. -Taylor
Custom boxes for backboards.
TAFx2,AFM and SS
Today I shipped out IJ, FH, STTNG, Diner and AFM
In the shop shipping next week I have F2K, TZ and FH
In the shopping getting a custom color finish I have Meteor.
If you have reached out and not heard back please hit me up again as I feel like an order or 2 has gotten lost in the shuffle.
Be safe-Taylor
36BCFEF3-F054-48C0-B1F8-9E07A1EEBBBD (resized).jpeg75096135-6EDA-4293-82A1-A1E6DBA8E802 (resized).jpeg1C1C51B6-2428-418E-B73E-55FD0CD9C5F4 (resized).jpegQuoted from Tuna_Delight:Nice work!
Sidenote: Why is Tommy always accusing you of having "ham hands" Taylor? Just jealous of your craftsman skills?
I tilt a lot.
Got an early start in the shop today and knocked out some Quicksilver and most of F-14, waiting for 3/4” stock to come in for one piece next week, and closed some rings.
0CFD3462-5EF6-41B0-9E8A-3BCF84480F01 (resized).jpegB00ED912-7E41-4429-A628-8C53D8EE3853 (resized).jpegDD952271-4F82-4497-A627-8742A8D60DB5 (resized).jpegQuoted from djblouw:Have you tracked how many QS rails you’ve made?
It’d an a good indication of how many more are entering the world.
I should do that.
Quoted from Micky:They both look really good!
Hope you are safe and healthy and thanks for following my thread.
alexmogil Thanks for the kind words. I feel like I'm spamming Pinside most of the time, but figure people can just drain my thread if they get sick of seeing it pop up.
Strohz Hope you guys are doing well. Sorry I've done a lousy part of keeping in touch. Hope you and the family stay safe.
meSz djblouw Unfortunately I have not had a set for Kiss come in. That said the set looks very similar to Mata Hari which I do have. If someone can take measurements for Kiss I'd be happy to make up a set so someone can mark them up for a template for future use. Just hit me up.
Shipped out 5 sets and a replacement for a TZ rail yesterday. Rails shipped: Paragon, Meteor, SS, Quicksilver and F-14. 07A64878-ACB0-4EE6-B9A6-F9D920F5E0CD (resized).jpg
Rails for Mata Hari, Evel knievel, Star Gazer and shooter rail for WH20 are finished and awaiting shipping which I plan to do on Monday. IMG_5465 (resized).jpeg
As of 5/14 I have caught up on making all orders.
Cheers-Taylor
Quoted from eagle18:Your as good shooting arrows as u are making Pinball rails!
I made the eggs Benedict as well.
Quoted from Atari_Daze:Taylor, I did a search and don't see Night Rider listed.
I might be in the market soon but don't have a donor set. Any chance you have a template already?
Unfortunately I haven’t done it.
Quoted from CaryCarmichael:Ok, TaylorVA, I just sent you an email. I have Bally Playboy rails to send you for making the necessary templates. Hopefully this helps you, and the others that are looking to sexy-up their Playboy restores.
Cheers, folks!
[quoted image]
Thanks man, sent a PM.
Quoted from eagle18:The EK/MH rails are awesome Taylor. Great job.
Thank you.
Quoted from meSz:Yeah unfortunately I don't have a set to send or measure for you. I have a CPR pf and was looking for parts machine but at this point .... no rails. With the CPR pf just coming out sure someone will hit you up!
Most likely. I’ll post if I get them. I should have some measurements for Voltan coming in. Will make a set to send out for fitting and marking underside of rails just in case nothing gets sent in.
Worked on a Wh20 backboard and rails for 2 different projects. Wh20 backboard is .52 plywood, which I don’t have so I used my router table to thin out a piece of 3/4”.
These have already hit the finishing stage as I hit the midday pocket of low humidity. Will work in these when I can over the weekend.
9447067F-6CAC-49AE-BC78-4C8691DF0D74 (resized).jpegQuoted from Scott9:Hi REESE,
I hope you might be able to help me. I need rails for a Williams IJ that I am building from scratch. I don't have any of the wood rails for the playfield, or the wood piece that goes behind my playfield to close it off from the cabinet. I also cannot find the wood door that goes in the upper cabinet to hold the lighting. Have you ever made speaker panels before? I have the acrylic but no wood piece to attach it to.
I am really sorry for all of the questions. This is the first time building a machine from scratch, hopefully you can lend me some help.
Thank you,
Scott
Shoot me an email. [email protected] and we will go from there.
Received several orders the last couple of days and trying to get back to everyone today. I have some more stock coming in hopefully by end of week so will probably be doing a batch this time.
Just a heads up, but the humidity in the mid-Atlantic right now sucks. Because of that my window for spraying lacquer isn’t as large as it’s been so there can be some delays if I can’t spray.
You have been warned.
Thanks-Taylor
Quoted from Flynnyfalcon:Hi Taylor, interested in some Quicksilver Rails and possibly a set of Whirlwind Rails. Would need shipping to Australia. Possible?
Absolutely. Shoot me a PM.
Quoted from leaffan67:Also want quicksilver! Please.
Please drop me a PM.
Everything has been milled. Hope to have them all drilled and sanded by end of weekend.
BE3DCEA3-830D-4C1F-B9CC-2C4E40A16D0D (resized).jpegF5677C95-FDFA-47DF-B4FA-10E52EAD6244 (resized).jpegI need to catch up on responding to some emails. With that said I am once again out of material to make rails and waiting on my supplier to restock. Not sure how long the wait will be, but it will stop me from making new orders until then. I will start making a new list for the next batch though.
All sanded and ready for finish.
2A3F5AEB-01CF-43AF-9C07-5AD9ABD5ACFD (resized).jpegSorry for a lack of updates, but humidity and an inability to get more material is cramping my workflow.
With that said yesterday was perfect for spraying so spent the day hammering out some rails.
Still waiting on dyes for Playboy.
Progress...
7C72ADD5-2D26-4BE7-850F-64EBA01E1BAB (resized).jpegB1329F8F-5433-42AD-B4C2-0BFA651AF7C7 (resized).jpegSorry I’ve been quiet, but inability to get material and humidity has just about completely shut me down. I am going to have to shut down for a bit until I get a steady flow of material, this may mean I start a queue for the fall when weather is more suitable to spraying lacquer.
The picture are rails that are now finished and ready to ship. I will be reaching out to those that originally asked to see if they are still interested. I will post here if any come available. I do believe I’ve got every order confirmed ready to go other than Playboy as I’m working on a match for the color.
D7BCAAD1-BC8E-448A-8F5E-800C1B20326C (resized).jpegShipping today: JJP Pirates, TAF, HGT, BOP, QS, Seawitch, IJ
I have a set of Star Gazer rails that I think were mentioned in an order, but canceled after I already started them. If you inquired about a set within the last month please hit me up. If no answer in the next couple of days I'll put them up for sale.
FOR SALE AND READY TO SHIP
EBD $75+shipping
Quoted from uncivil_engineer:Well bummer, looks like Batman will be on hold a while.
They are done. I sent a PM about their status.
Quoted from Flynnyfalcon:Is that a “Q” for Quicksilver?? I put forward my interest a month or so ago.
I have a set for you. They just need to sit for a couple days prior to shipping.
Current list of what I have in the shop.
DE Batman are finished and will ship at end of week for uncivil_engineer
Quicksilver are finished and will ship at end of week for Flynnyfalcon
Wh20 Backboard is ready and will ship this week(need to make a box) for lordloss
TAF Backboard is ready and will ship this week(need to make a box) for Jeff W(Not sure Pinside name)
Playboy rails are still getting worked on, didn't like the finish I got so ordered some new dye to try for CaryCarmichael
Quoted from JDissen87:I might have waited too long to ask to get Space Invaders rails made...
Though, at my current rate you'll likely be opening back up again before I'll actually need them.
JDissen87 I currently do not have them so would need them sent in. I'll update here when I can start making rails again. Big obstacle is securing material right now and I usually try to stockpile when I can and will do so if the chance arises.
You're currently viewing posts by Pinsider taylorva.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/oak-replacement-playfield-rails-wh2o-and-taf-ready-to-ship-or-york/page/2?tu=taylorva and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.