Addams Family, The
Bally, 1992
Attack from Mars
Bally, 1995
Bad Cats
Williams, 1989
Bram Stoker's Dracula
Williams, 1993
Checkpoint
Data East, 1991
Doctor Who
Bally, 1992
Fathom
Bally, 1981
FunHouse
Williams, 1990There have been 471 images uploaded to this topic. (View topic image gallery).
Thanks for the amazing work you put into your rails. I have gotten a couple of sets off of you for the restores I have comoleted and they look amazing.
Hope you can come back soon! I know there will be many of us who will need your rails for restores in the future.
I for one will camp outside waiting in line for him to open in the fall. Very good work and worth the wait.
Thanks Taylor for years of hard work for our games!
Do you have any unclaimed Titles left?
Anything lying around that we could buy for xmas?
Take Care, and Happy Holiday's to you and Family!
Taylor, your work is always top!!
Sorry to see you go, but definitely understandable.
((I need rails for 2 games, lol). Time to break out the router and fix my saw))
Dear Taylor....thanks for all your hard work! Beautiful job! I'm happy I received a couple sets for a few of my classic Bally's.
I hope you come back to doing the rails...but I know you are a pinballer first and I hope you keep your passion for playing.
I do a "volume" industry as my day job and at a certain point it becomes drudgery and slavery....people who haven't done volume for a low margin can't understand this.
If you do the rails again, good for all of us...but if not c'est la vie.
Cheers!
Quoted from pennykpinball:
Hi, do you still have these for sale?
Quoted from robertg130:
Looking for the rail for TSPP
If you still have it
Thanks
They were custom made to order, and he's closed until next year.
I was able to hunt down some stock, so should be good for about 10 sets. I'm trying to reach out to those that have emailed, but I was inundated after my most recent post. Please hold off on inquiring about new orders until I can go through my email. Thanks - Taylor
I have a set of Mata Hari in red lacquer available that can ship at the end of this week. They are $65+actual shipping. HMU if you want them.
-Taylor
Damn, just read through the comments. Let me say thanks to everyone that posted. I have no doubt I will be back.
Hi, do you still have these for sale?
pennykpinball Rails are made to order. Feel free to PM to discuss.
Looking for the rail for TSPP
If you still have it
Thanks
robertg130 please PM to discuss
I want a pair if Fish Tales in oak.
Opps, I'll send a message next Fall. 
Happy Holiday's!
Quoted from TaylorVA:
I was able to hunt down some stock, so should be good for about 10 sets. I'm trying to reach out to those that have emailed, but I was inundated after my most recent post. Please hold off on inquiring about new orders until I can go through my email. Thanks - Taylor
I have a set of Mata Hari in red lacquer available that can ship at the end of this week. They are $65+actual shipping. HMU if you want them.
-Taylor
Quoted from lordloss:
One set of Doctor Who Rails please!
Still looking for this if you can add to your next time you get stock list.
I was able to hunt down some stock,
I don't want to tell you what to do, Taylor, but there has to be any number of cabinet shops in your area that could make you the stock you need.
I used to make my own but I had the use of a planer and table saw. Run a board through the planer then through the table saw a few times. I'd have all the stock you'd need made in less than 15 minutes.
I make mine from this:
https://www.homedepot.com/p/Weaber-1-2-in-x-4-in-x-4-ft-S4S-Oak-Board-27416/207058981
Run them thru the Joiner to straighten them out, then rip to height.
Too bad I don't live closer since my family owns a woodworking business and I have access to every tool imaginable so could easily get you the stock needed. At one point I was going to produce cabinets when Doug stopped however I figured the demand wasn't there anymore plus they are a pain to ship. Rails were a smart idea plus they can easily be shipped in a tube. Hopefully someday there will be something I can offer to the pinball community from a wood working standpoint as creative as your rails or BK's pinfooties.
Quoted from Bryan_Kelly:
I don't want to tell you what to do, Taylor, but there has to be any number of cabinet shops in your area that could make you the stock you need.
I used to make my own but I had the use of a planer and table saw. Run a board through the planer then through the table saw a few times. I'd have all the stock you'd need made in less than 15 minutes.
I’ll take 40 pieces at 1/2” x 3” x 4’
Let me know total shipped. Thanks.
Quoted from BobLangelius:
I make mine from this:
https://www.homedepot.com/p/Weaber-1-2-in-x-4-in-x-4-ft-S4S-Oak-Board-27416/207058981
Run them thru the Joiner to straighten them out, then rip to height.
The mill that provides HD is the one I use as they are local to me. They are out of stock and have been for a while.
Pic is of what’s in my shop and being worked on. Everything listed has been milled and hole locations transferred. 
7CDA5157-EE1D-4A49-871B-CCCE3238E48E (resized).jpeg
I know this is a difficult time for a lot of people and I just wanted to say I hope everyone can get of a break during this holiday season. Please be safe and see you in 2021. Cheers- Taylor
BCF624E9-4695-4F2E-9EA8-529C2D43DD20 (resized).jpeg
Hey, glad to see you are still at it...I was bummed when I heard Reese Rails had closed! Enjoy your holidays!
Pic is of what’s in my shop and being worked on. Everything listed has been milled and hole locations transferred. [quoted image]
I know this is a difficult time for a lot of people and I just wanted to say I hope everyone can get of a break during this holiday season. Please be safe and see you in 2021. Cheers- Taylor
[quoted image]
Cheers Taylor. Happy Holiday's
...and I will join you for that drink.
Thanks everyone. Has been quite a year. I’m going to do a year in review after Christmas and will share a couple other projects I’ve worked on. Thanks as always for all the support and business, stay safe out there.
Thanks for all you do Taylor... when you get back into it i will be a patron for a few of my pins. keep on keepin' on brother
Was High Speed ever produced?
Quoted from eyeamred2u:
Was High Speed ever produced?
Yes, I have HS in my library of rails to replicate.
Wanted to thank all of you for your support this year. I donated $150 towards a charity Tommy Skinner is raising money for in the name of Reese Rails. This is only possible because of your patronage, so thank you.
I am adding a link if you would like to make a personal donation.
Thank you all once again and Merry Christmas.
https://www.facebook.com/donate/3632751140123941/3632752340123821/
Yes, I have HS in my library of rails to replicate.
Awesome. I would love a set when things get back to normal. Happy Holidays.
Ken
Some Kiss rails FS. I don’t have these to copy so haven’t been able to make them so nice to see someone offering them up.
https://pinside.com/pinball/forum/topic/fs-kiss-pf-rails-79#post-6045988
My shop has been busy. Orders with dye/stains always take a bit longer. Rails in black/red lacquer should be ready to ship out start of next week.
I have a couple orders to start, but then will be on a break and will work on sourcing material.
3F07D2B9-00F4-45D6-B500-0ADD25A89489 (resized).jpeg
57FBBDB5-DE1C-4E1C-9DFF-31106AB08026 (resized).jpeg
E724ED95-A561-47E8-AF9A-188E97394250 (resized).jpegSeveral months ago I bought a set of TZ rails from you and they are beautiful. In a few months I had planned to restore a BOP and hoped I would also get new rails for that, but I completely understand your situation.
Wanted to say thanks for what I did manage to get off of you, your work is stellar and a real benefit to the hobby.
Best wishes and good luck on sourcing new material for the future!
Quoted from damadczar:
Several months ago I bought a set of TZ rails from you and they are beautiful. In a few months I had planned to restore a BOP and hoped I would also get new rails for that, but I completely understand your situation.
Wanted to say thanks for what I did manage to get off of you, your work is stellar and a real benefit to the hobby.
Best wishes and good luck on sourcing new material for the future!
Thanks for the kind words. I’m going to keep scouring for material.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside
Minneapolis, MN
Wellington
Bayamon
lordloss