Quoted from eagle18:Your as good shooting arrows as u are making Pinball rails!
I made the eggs Benedict as well. 
(Topic ID: 105198)
Linked Games
Addams Family, The
Bally, 1992-
Attack from Mars
Bally, 1995
-
Bad Cats
Williams, 1989
-
Bram Stoker's Dracula
Williams, 1993
-
Checkpoint
Data East, 1991
-
Doctor Who
Bally, 1992
-
Fathom
Bally, 1981
-
FunHouse
Williams, 1990
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Houston, TX
Taylor, I did a search and don't see Night Rider listed.
I might be in the market soon but don't have a donor set. Any chance you have a template already?
Quoted from Atari_Daze:Taylor, I did a search and don't see Night Rider listed.
I might be in the market soon but don't have a donor set. Any chance you have a template already?
Unfortunately I haven’t done it.
Quoted from CaryCarmichael:I just sent you an email. I have Bally Playboy rails to send you for making the necessary templates.
You won't regret it!
Quoted from Atari_Daze:You won't regret it!
I’ve gotten a few sets from Taylor - they’re real, and they’re fantastic.
Playboy is coming up in the queue, next. So, since Pops got a NOS populated playfield for his Playboy, we were able to remove these from his old playfield. All to hopefully benefit others, and my good friend’s upcoming playfield swap.
Quoted from CaryCarmichael:Ok, TaylorVA, I just sent you an email. I have Bally Playboy rails to send you for making the necessary templates. Hopefully this helps you, and the others that are looking to sexy-up their Playboy restores.
Cheers, folks!
[quoted image]
Thanks man, sent a PM.
Quoted from eagle18:The EK/MH rails are awesome Taylor. Great job.
Thank you.
Quoted from TaylorVA:mesz djblouw Unfortunately I have not had a set for Kiss come in. That said the set looks very similar to Mata Hari which I do have. If someone can take measurements for Kiss I'd be happy to make up a set so someone can mark them up for a template for future use. Just hit me up.
Yeah unfortunately I don't have a set to send or measure for you. I have a CPR pf and was looking for parts machine but at this point .... no rails. With the CPR pf just coming out sure someone will hit you up!
Quoted from meSz:Yeah unfortunately I don't have a set to send or measure for you. I have a CPR pf and was looking for parts machine but at this point .... no rails. With the CPR pf just coming out sure someone will hit you up!
Most likely. I’ll post if I get them. I should have some measurements for Voltan coming in. Will make a set to send out for fitting and marking underside of rails just in case nothing gets sent in.
Worked on a Wh20 backboard and rails for 2 different projects. Wh20 backboard is .52 plywood, which I don’t have so I used my router table to thin out a piece of 3/4”.
These have already hit the finishing stage as I hit the midday pocket of low humidity. Will work in these when I can over the weekend.
9447067F-6CAC-49AE-BC78-4C8691DF0D74 (resized).jpegHi REESE,
I hope you might be able to help me. I need rails for a Williams IJ that I am building from scratch. I don't have any of the wood rails for the playfield, or the wood piece that goes behind my playfield to close it off from the cabinet. I also cannot find the wood door that goes in the upper cabinet to hold the lighting. Have you ever made speaker panels before? I have the acrylic but no wood piece to attach it to.
I am really sorry for all of the questions. This is the first time building a machine from scratch, hopefully you can lend me some help.
Thank you,
Scott
Quoted from Scott9:Hi REESE,
I hope you might be able to help me. I need rails for a Williams IJ that I am building from scratch. I don't have any of the wood rails for the playfield, or the wood piece that goes behind my playfield to close it off from the cabinet. I also cannot find the wood door that goes in the upper cabinet to hold the lighting. Have you ever made speaker panels before? I have the acrylic but no wood piece to attach it to.
I am really sorry for all of the questions. This is the first time building a machine from scratch, hopefully you can lend me some help.
Thank you,
Scott
I am just outside of Cleveland OH
Quoted from Scott9:Hi REESE,
I hope you might be able to help me. I need rails for a Williams IJ that I am building from scratch. I don't have any of the wood rails for the playfield, or the wood piece that goes behind my playfield to close it off from the cabinet. I also cannot find the wood door that goes in the upper cabinet to hold the lighting. Have you ever made speaker panels before? I have the acrylic but no wood piece to attach it to.
I am really sorry for all of the questions. This is the first time building a machine from scratch, hopefully you can lend me some help.
Thank you,
Scott
Shoot me an email. [email protected] and we will go from there.
Quoted from TaylorVA:Taking the rest of the weekend off. Will be eating these tomorrow. [quoted image][quoted image]
Those will be so good!
Quoted from CaryCarmichael:Ok, TaylorVA, I just sent you an email. I have Bally Playboy rails to send you for making the necessary templates. Hopefully this helps you, and the others that are looking to sexy-up their Playboy restores.
Cheers, folks!
[quoted image]
I could use a set of pby rails...
Quoted from TaylorVA:More
Most likely. I’ll post if I get them. I should have some measurements for Voltan coming in. Will make a set to send out for fitting and marking underside of rails just in case nothing gets sent in.
Ok let me know if I can help in any way. As stated I have the KISS pf, just not the rails!
Received several orders the last couple of days and trying to get back to everyone today. I have some more stock coming in hopefully by end of week so will probably be doing a batch this time.
Just a heads up, but the humidity in the mid-Atlantic right now sucks. Because of that my window for spraying lacquer isn’t as large as it’s been so there can be some delays if I can’t spray.
You have been warned.
Thanks-Taylor
Quoted from pinballinreno:I could use a set of pby rails...
I just got them out the door today. Taylor should have them at the beginning of next week.
Cheers!
Melbourne
Toronto, ON
Quoted from Flynnyfalcon:Hi Taylor, interested in some Quicksilver Rails and possibly a set of Whirlwind Rails. Would need shipping to Australia. Possible?
Absolutely. Shoot me a PM.
Quoted from leaffan67:Also want quicksilver! Please.
Please drop me a PM.
Everything has been milled. Hope to have them all drilled and sanded by end of weekend.
BE3DCEA3-830D-4C1F-B9CC-2C4E40A16D0D (resized).jpegF5677C95-FDFA-47DF-B4FA-10E52EAD6244 (resized).jpegQuoted from TaylorVA:Been saving rail money for a while and finally landed a JP.
[quoted image]
The best kind of hobby is the self sustaining hobby.
I need to catch up on responding to some emails. With that said I am once again out of material to make rails and waiting on my supplier to restock. Not sure how long the wait will be, but it will stop me from making new orders until then. I will start making a new list for the next batch though.
All sanded and ready for finish.
2A3F5AEB-01CF-43AF-9C07-5AD9ABD5ACFD (resized).jpegSorry for a lack of updates, but humidity and an inability to get more material is cramping my workflow.
With that said yesterday was perfect for spraying so spent the day hammering out some rails.
Still waiting on dyes for Playboy.
Progress...
7C72ADD5-2D26-4BE7-850F-64EBA01E1BAB (resized).jpegB1329F8F-5433-42AD-B4C2-0BFA651AF7C7 (resized).jpegSorry I’ve been quiet, but inability to get material and humidity has just about completely shut me down. I am going to have to shut down for a bit until I get a steady flow of material, this may mean I start a queue for the fall when weather is more suitable to spraying lacquer.
The picture are rails that are now finished and ready to ship. I will be reaching out to those that originally asked to see if they are still interested. I will post here if any come available. I do believe I’ve got every order confirmed ready to go other than Playboy as I’m working on a match for the color.
D7BCAAD1-BC8E-448A-8F5E-800C1B20326C (resized).jpegReply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
