Does anyone have a good source for these? I'm not finding the right sizes in my search.
You're currently viewing posts by Pinsider Jigs.
Click here to go back to viewing the entire thread.
Hey Ed,
9/16" length and inner diameter is for a #8 screw.
Just searching for these. I've got plenty of clamps, I just threw one in the picture for illustration
https://www.marcospecialties.com/pinball-parts/03-6047
These are likely the same, just colorwise wrong and silly high-priced
I always say if they don't sell it at McMaster, I don't want it
https://www.mcmaster.com/94639A785
Looks like these will work, I'll report back with specifics.
Anyone already sort these out and order the right part?
That's a good match there, Ed. I'm glad to hear you will start stocking these in the near future. Thanks for the help too.
I'll get my McMaster order on Monday and I'll do a comparison. I was hoping to grab them on a pinball order.
Quoted from tomtest:Lowes has them in their speciality parts bins in hardware.
Quoted from KenLayton:Ace Hardware stores have them.
Thanks. If I was looking for one or two, I’d try those sources. Historically, if those stores have anything like this, it’s one or two amidst a pile of white and clear baggies of various sizes.
Probably just happens to me.
McMaster posts are a great match. $12 for 100. I’m very pleased with these. Thanks everyone for the suggestions.
095AED8E-1E30-404A-8719-D1F1B55A13A9 (resized).jpeg142BC4A4-F171-4CE5-8AAB-8B3175863856 (resized).jpeg1F36A5C8-14AA-48D2-B3C1-0F19FCA8425A (resized).jpegF7F6D97C-28E3-4956-945B-388018877C69 (resized).jpeghttps://www.mcmaster.com/94639A786
Here is a link for the #10 version
I prefer the #8, as there is less left and right play in the post. All of the fasteners are #8. It's only a 0.001023622 inch difference but it's less "floaty"
Maybe Williams couldn't get #8 and #10 was just a good alternative. Either way, I'm happy.
Also, it's likely GPE will carry the correct #10 size in the future. That's awesome.
You're currently viewing posts by Pinsider Jigs.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/nylon-spaces-for-under-pf-wire-harness-early-wms-ss?tu=Jigs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.