Now Available- WOZ Playfield Plastic Protector Set

I now have available at shows and from my site, complete Wizard of Oz playfield plastics sets.

These sets are high quality, laser cut, PETG, for most every playfield plastic on the game. The set includes 12 pieces and are specially cut to not interfere with ball drops. They have appropriate cut-outs in them for easy install over posts and wiring. With these cut-outs, there's no need to remove some difficult to get to posts, and wiring harnesses. These sets are very well thought out and manufactured by my good friends at PinBits in California.

They can be ordered from my Products page...

www.LockWhenLit.com/Products.htm

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
WOZPPS.jpg

Post last edited 9 years ago.

#2 9 years ago

CAT

DCFAN

Pinside+ Frequent

The link is not working.

#3 9 years ago

???

10pingrn

Pinside member

11y 51,550 119

Ordered a set, thanks

#4 9 years ago

SLV

Steve_in_Escalon

Pinside+ Frequent

12y 84,050 611

Link works for me.

Steve (in Escalon, CA)

#5 9 years ago

CAT

DCFAN

Pinside+ Frequent

I tried Internet Explorer and Safari an neither is working for me.

"This page can’t be displayed

•Make sure the web address http://www.lockwhenlit.com is correct.
•Look for the page with your search engine.
•Refresh the page in a few minutes."

#6 9 years ago

ROB

Borygard

Quoted from DCFAN:
I tried Internet Explorer and Safari an neither is working for me.
"This page can’t be displayed
•Make sure the web address http://www.lockwhenlit.com is correct.
•Look for the page with your search engine.
•Refresh the page in a few minutes."

Hmmm, not sure what's going on. I tried on three different devices with three different browsers, all bring the page and site up fine. The site was just updated, so maybe give it a bit of time.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

#7 9 years ago

ACE

Acejedi

Pinside member

Citrus Heights, CA

11y 51,900 459 57 15

I have this, got it from Rob in Seattle and its fantastic. Thanks Rob, say hi to Taro from me and Laura.

Joe(acejedi)

#8 9 years ago

CAT

DCFAN

Pinside+ Frequent

Bump.

Neither of the links above are working. I have tried it on my IPad Air and Windows 8 PC with IE and Safari.

I also just tried it with my Windows 7 work computer and no luck.

#9 9 years ago

ETA

nichipax

Inactive member

Colesville, MD

11y 12,400 19 3

link does not work.

#10 9 years ago

MOB

JoinTheCirqus

Pinside member

Lyme, NH

18y 95,300 2,115 1

Ordered a set as well. If they're coming from Rob, you know it's going to be excellent.

thanks, Michael

#11 9 years ago

CAT

DCFAN

Pinside+ Frequent

Finally the link works.

#12 9 years ago

ROB

Borygard

Quoted from DCFAN:
Bump.
Neither of the links above are working. I have tried it on my IPad Air and Windows 8 PC with IE and Safari.
I also just tried it with my Windows 7 work computer and no luck.

Quoted from DCFAN:
Finally the link works.

I have no idea why you weren't able to access the site. Glad it's finally working for you though.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

#13 9 years ago

CAT

DCFAN

Pinside+ Frequent

OP
Quoted from Borygard:
I have no idea why you weren't able to access the site. Glad it's finally working for you though.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

It must have had something to do with the internet and regional service related to your site update. I remember someone saying something about that one other time when someone updated a site. Notice nichipax (one state from me) above also could not get it to work.

Anyway, thanks for providing a comprehensive quality set of protectors. I will be buying when/if I get my pre-order ECLE.

#14 9 years ago

CAT

DCFAN

Pinside+ Frequent

Bump for those that missed this thread.

It is great to see Pinbits make these. I wish they would make protectors for all new games.

#15 9 years ago

DPL

Arcadedl

Pinside member

Reading, MA

11y 37,150 396

Order placed

#16 9 years ago

ROB

Borygard

Kind of hard to photograph clear PETG, especially with the protective film removed and installed under stock plastics. . Then there's the fact that my photography skills suck.

Here are some installed though...

image-844.jpgimage-155.jpgimage-698.jpg

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

2 months later

#17 9 years ago

HLT

herg

LED OCD

13y 110K 5,551

I installed a set of these, and I just wanted to say that they are extremely nice. I put plastic protectors on all my games, and this set is probably the nicest I've seen. Everything fit perfectly, and there was a protector for almost every plastic in the game. The only two I can think of that weren't included were under the castle mini-playfield. Thanks, Rob.

#18 9 years ago

ROB

Borygard

Thanks herg! It really is a great set and a must for WOZ, IMHO.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

#19 9 years ago

CAT

DCFAN

Pinside+ Frequent

I just got finished installing the protector set. Bravo on a very comprehensive and precise laser cut set of protectors. It is probably the best set of protectors I have seen for any game.

Borygard, thanks for making them available.

#20 9 years ago

ROB

Borygard

Thanks DCFAN!

I see these are now available on PinBits' site. Grab a set with some of their other great products!

www.PinBits.com

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

6 months later

#21 9 years ago

ROB

Borygard