Quoted from pinlink:I'm Looking for a used Pinbot playfield in any condition. Thanks!
you your interested in my custom one or I have another CPR one with aftermarket clearcoat added.
You're currently viewing posts by Pinsider captainneo.
Click here to go back to viewing the entire thread.
Quoted from pinlink:I'm Looking for a used Pinbot playfield in any condition. Thanks!
you your interested in my custom one or I have another CPR one with aftermarket clearcoat added.
Quoted from ForceFlow:I've got a Gottlieb Super Soccer playfield.
All the paint is intact. The top and bottom edges of the playfield have some damage to the wood. Inserts are all there and intact, but some need to be glued, and the rest would probably pop out without too much trouble.
Right now, the photos I have are from before I padded and wrapped it up for storage, but if you're seriously interested, I can unwrap it and take some high-res photos.
https://pinside.com/pinball/forum/topic/fs-gottlieb-super-soccer-playfield
1.jpg
2.jpg
3.jpg
I kinda want that. There was one at expo but I didn't buy it. Think I may do it to may my super soccer a custom theme. I love the game. I thought it would be fun to redo the theme.
Looking for an Escape from the lost world playfield. NOS or used. Doesnt' matter, as long as it's not warped or water damaged.
Quoted from Sinbad:Swords of fury anyone?
yes , it's a great game. I'm up for playing a game. Dollar game?
Quoted from MustangPaul:Yup most games are a dollar per play these days.
is that what dollar games mean in MN?
around here if you start mentioning dollar games, your pocket better be stacked like it's going to the nudie bar.
Quoted from balboarules:This was just removed from a home use game and replaced, it had a buffing pad on it too long and took some of Batman's face off and the shoot again, could be restored, could be used as a wall hanger, def could use a wet sanding as there are minor scratches down the middle area.
Shipping extra, have a box to ship it in, and local pickup is free of course.
300.00
Had a few people PM if I would go lower, so new price 250 plus shipping.
DSC02180_(resized).JPG
DSC02179_(resized).JPG
DSC02181_(resized).JPG
DSC02182_(resized).JPG
DSC02183_(resized).JPG
DSC02184_(resized).JPG
DSC02186_(resized).JPG
DSC02185_(resized).JPG
DSC02187_(resized).JPG
that sucks and very difficult to fix. i've never had to fix a DK, so I don't have scans available for that field. IF I did, it would be a lot easier. Unfortunately when they use photoshopped pictures, you pretty much have to do water slides that are printed. Anything touched up by hand will stand out. Especially right in front of the flippers. it's shame, the rest of the field looks to be perfect.
Quoted from MustangPaul:I just bought a new 2011 Rolling Stones pf from Stern for $189 and they said it wasn't a second and nothing wrong with it. I'm gonna light up the inserts and use it as wall art after my bodyman is done spraying clear on it. BTW they have 9 left.
that's about the same value i'd put on it, if it was fully populated and put in a cabinet.
good luck on the galaxy. I'm restoring one right now, because the guy looked for years to find a better one. It was pretty trashed too. :/
I have an NOS GNR field that has been professionally clearcoated. Only one i've ever seen. $1800. Will consider trade towards + or - cash for a Cosmic Gunfight, Mexico 86 or Pool Champion machines. Located in SE WI.
11222278_1092206154225917_1102475721168651411_o (resized).jpg
14682009_1092206544225878_6589258807117420732_o (resized).jpg
14701004_1092206637559202_8452126615019983_o (resized).jpg
14707859_1092206797559186_7327356832211100745_o (resized).jpg
14707989_1092206180892581_6205774559796211382_o (resized).jpg
14711487_1092206634225869_2249920886835639955_o (resized).jpg
14711636_1092206777559188_4412798579467837868_o (resized).jpg
14712531_1092206077559258_8934444910861822275_o (resized).jpg
Quoted from Atari_Daze:Looking for any rough playfield to hone my restoration skills on.
Tackled this SBM and I think I did a decent job but could always use improvement.
Drop me a pm if you have something.
looks great, but what happened to all your screw holes? You go in and repaint all the white everywhere? That's insane amount of work.
if the game has insert sheets available, I have them buy a set and send them to me. if it's a game that doesn't have decals. I print them if they are black text only. If they are multicolored or white. then it's a huge process if it can even be done.
Quoted from Whysnow:looking for a 2 player joust playfield, any condition
good luck on those. I've restored and sold 3 over the years. $2800, $3600 and $2900. Fully restored.
Quoted from Whysnow:thankfully, CPR is making some in the near future it appears!!!!
havn't they been saying that for the past 8 years?
what are they going to charge for those? With the grove cut and the bend involved. Can't be an easy field to make. Nor easy to store anywhere.
you might want to change that 2nd picture. Because the way the paper is, it looks like someone cut off the bottom 2" of the playfield.
Quoted from Gundam_Pilot_:Looking for a Q Bert’s Quest playfield. Really.
Any help would be appreciated. Thanks guys.
chocolate sauce didn't go so well?
You're currently viewing posts by Pinsider captainneo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/nos-playfields-you-havent-seen-and-i-havent-seen?tu=captainneo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.