Johns Creek, GA
Cpr Ebd posted in the Marketplace (not my sale).
https://pinside.com/pinball/market/classifieds/ad/74764
(Topic ID: 139632)
1 week later
I have a Wiliams Tri Zone playfield for sale. I am asking $30. I am located just South of Baltimore.
Williams Tri Zone Stripped Playfield #1 (resized).jpgWilliams Tri Zone Stripped Playfield #2 (resized).jpgWilliams Tri Zone Stripped Playfield #3 (resized).jpgWilliams Tri Zone Stripped Playfield #4 (resized).jpgWilliams Tri Zone Stripped Playfield #5 (resized).jpgWilliams Tri Zone Stripped Playfield #6 (resized).jpgWilliams Tri Zone Stripped Playfield Rear (resized).jpgMy Bally Mystic has a good bit of wear to the playfield.
If anyone out there has a decent one to sell I am interested. Thanks!
Still looking for playfields.
Stern Stars and Bally Viking. If you have one to sell, let me know.
Thanks
Stargate renovated with overlay, clear comes a little up under posts, therefor only 290 Euro plus shipping ...
https://www.dropbox.com/sh/ylmgo59yy11lino/AAApB1Ze9MUuC09P7EEnz0bWa?dl=0
Mt Martha
Anyone have a Wade Kings & Queens playfield they haven’t installed? Or a nice original after installing their Wade playfield?
I found this on Facebook (not my sale):
Close Encounters
Cost: Make Offer
Seller: Ken Broel
https://www.facebook.com/groups/pinballenthusiasts/permalink/2337215872977993/
OP: I have this populated close encounters play field if anyone needs it… in Ionia, Michigan...Make me an offer
1 week later
I have the following NOS pf’s for sale.
Iron Man - clearcoated. Don’t know who did the clear
Metallica Pro
AC/DC Premium
not my sale
Twilight Zone
Cost: 500
richmond.craigslist.org link
OP: Original Williams Twilight Zone Playfield, this was expertly repaired and cleared but I ended up not needing it. Main playfield only, no mini playfield.
Cpr is finishing up their run of Harlem playfields
https://pinside.com/pinball/forum/topic/announce-cpr-bally-harlem-globetrotters-playfields#post-4883490
Anyone have a Centaur Playfield or plastic set or both for sale? Can be nice used one or cpr. Thanks.
Quoted from bluespin:I found this for sale on Facebook (not my sale):
Looking for a replacement PINBALL MACHINE Playfield, some spare parts, or making some neat WALL ART? We have 22 pinball machine Playfields we have available for local pickup at TNT Amusements 1310 Industrial Blvd in Southampton PA 18966. Priced between $100 and $800 each. Watch the video to see the playfields and come on in! We are open 10am to 8pm Mon thru Sat...we can also possibly meet you on Sunday afternoons.
Here is the direct video link to see them--cut and paste:
Here they are!
Rock $350
Airborne Avenger $300
Star Trek (bally) $100
"Toilet" game $100
Pennant Fever $100
Whirlwind $300
Hollywood Heat $300
F14 Tomcat $300
Getaway High Speed 2 $200
Alien Star $500
Genesis $400
Hollywood Heat $100
Eclipse $800
Elvis Alive $200
Judge Dredd $300
Smokin' Token Redemption Game $150
Shuffle Bowling Alley empty --free
Black Pyramid $200
Gorgar $300
Caveman $100
Arena $150
WWF Royal Rumble $300
Time Line $150
CALL me 215-953-1188 ext 0...we are open LATE every night!
Watch Video Here---cut and paste this link...
Seller: Todd Tuckey - TNT Amusements
Location: Southampton, PA
https://www.facebook.com/groups/669880966459893/permalink/2078839125564063/?sale_post_id=2078839125564063&rt=11
@midniterider TNT has/had a Timeline playfield for $150
Warman, SK
Quoted from russdx:Any NOS/CPR earthshaker playfields for sale give me a shout
Its a bronze, but I recently acquired one from Starship Fantasy.
www.starship-fantasy.com/
Quoted from TractorDoc:Its a bronze, but I recently acquired one from Starship Fantasy.
www.starship-fantasy.com/
[quoted image]
Hello, thx for the reply. I don't no how i missed them as i did check that site!
I found a silver on a french reseller site which i ordered on Thursday! but not quite sure if it's in stock as couldn't quite read /translate the french. Hopefully it turns up. If not i will contact you if your selling?
Regards
Russell
Denekamp
Looking for a Bally FREEDOM EM playfield, and a Bally HI-DEAL playfield. Thanks to anyone has has one to sell, or has a line on one. I have a wanted ad in classifieds, but so far only scammers have replied. 
Quoted from PinPilot:Looking for a Bally FREEDOM EM playfield, and a Bally HI-DEAL playfield. Thanks to anyone has has one to sell, or has a line on one. I have a wanted ad in classifieds, but so far only scammers have replied.
I have a bally freedom playfield not populated. It came with my freedom but my playfield isn’t that bad to change it out. Pm me if interested
I found this for sale (not my item):
Nitro Groundshaker
CPR Gold
$495
Pinsider: NicoVolta (Nic Schell)
Contact/Link: https://www.facebook.com/groups/Pinball4sale/permalink/2649205148439601/?sale_post_id=2649205148439601
Quoted from bluespin:I found this for sale (not my item):
Nitro Groundshaker
CPR Gold
$495
Pinsider: nicovolta (Nic Schell)
Contact/Link: https://www.facebook.com/groups/Pinball4sale/permalink/2649205148439601/?sale_post_id=2649205148439601
A Gold for $495. 
Looking for a Seawitch playfield, prefer NOS or new repro. Can't seem to get any clear answers from the folks who are supposedly reproducing them. Thanks in advance.
Quoted from dmartin244:Looking for a Seawitch playfield, prefer NOS or new repro
You can get on the CPR Pre-Order Here:
https://classicplayfields.com/preorders/
Quoted from Cherries_Jubilee:You can get on the CPR Pre-Order Here:
https://classicplayfields.com/preorders/
Thanks for pointing that out. I've already done that. Unfortunately it's not actually a pre-order but a "measuring interest" poll and I don't have much faith in them reproducing that title again. It could be a few years til they run it....
Quoted from dmartin244:Thanks for pointing that out. I've already done that. Unfortunately it's not actually a pre-order but a "measuring interest" poll and I don't have much faith in them reproducing that title again. It could be a few years til they run it....
So when is CPR supposed to start the NEW Business model?
Quoted from meSz:So when is CPR supposed to start the NEW Business model?
From what they have told me they are currently trying to inventory 1/2 Million Inserts that they have on hand ( apparently they are all in boxes/bags all over the place ), and once they have a complete database of the inventory then they can figure out which "legacy" playfields they can make based upon Insert Counts. Once they have that in place then they will Start adding certain playfield titles to the web site for On-Demand purchase. They will continue to add titles until the entire catalog is available.
Also note that different Insert Manufacutrers/Suppliers products are Different Dye-lots, meaning that a 1" Round Starburst insert from one supplier will Not be an exact Color Match to another supplier. So if a playfield title requires 6 of these inserts and they want to make 10 of the title they would need 60 of that insert all the Same Color & all from the same supplier. Another note is that a 1" Insert from one supplier is Not necessarily the exact same size as another supplier, so they may have to alter the CAD File so that the CNC cuts the Hole according to the Supplier Specificed Insert can be used......
I feel for these guys as there are 55 Different skews of Inserts x 14 Different Colors ( different MFGs Colors ) so for them to offer the entire catalog right now they would have to invest about $ 350,000 in Inserts to have on hand to make them.....that is just way too much to ask of any small business of just a couple of guys doing this as a hobby.....
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
