You're currently viewing posts by Pinsider tjc02002.
Click here to go back to viewing the entire thread.
Quoted from pinster68:IIRC back in 2009 he wanted 10k for his MM when they were fetching 8k, and 2600 for a FT when they were 1500. And he was firm. Times change ... worth a call for anyone looking.
Just so too many people don't bug this guy or waste their time: I called him and talked to him about the stuff. He said he wants $10k for IJ, $8k for TAF, and about $3-4K each for FT or JY. He also said he's not negotiable. This is just an FYI.
Quoted from Taxman:What did I do?
You made your forum name taxman
Quoted from the96stang:Anyone have any intrest in a gottlieb Sns? 1100 located in CT. Game is NICE all around.
What's sns?
Game is sold.
Zaccaria Magic Castle for trade or sale:
Pretty nice game overall. Playfield has Mylar and is in great shape. Cabinet is good but has some scratches here and there. Plays 100%. The front backglass is a remake where it is a printed sheet of paper sandwiched between 2 sheets of plexiglass, actually looks pretty good. I'm mostly looking for trades for other pinballs but I would also sell it. I value it at $1200.
-Tom
More pics here:
http://s180.photobucket.com/user/tjc02002/library/Magic%20Castle/
Selling my Harlem globetrotters pin. Price is $800. I would say it's a good players pin. Everything is working fine except it has the player 3 and 4 displays out. It has an alltek ultimate MPU and new rectifier board. It has full Mylar but it wasn't put on when new so there's some minor marks underneath it(see pics). The cabinet generally looks good but the cabinet bottom has a crack and some tacks around the outside holding it up. No water damage or anything like that. The backglass has a small amount of separation at the top but it was all sealed up and there's no paint missing so it doesn't look bad(see pic). The rubbers needs to be replaced and I have a full rubber kit for it so that comes with it. I can replace them for you if need be. I'm in East Haddam CT. Pm me. Thanks,
-Tom
Nice High Speed in CT:
https://pinside.com/pinball/market/ad/23153
Thanks,
-Tom
Flash Gordon $1000 Sold.
Game plays but needs to be shopped. There are also a couple of problems like one spinner is broken and one of the displays flickers. It has a very nice original backglass. The playfield looks nice as it seems to have Mylar from when new. There are some minor wear spots near the pops/saucer and ball entrance. The cabinet was repainted on one side and the front but it's actually a pretty decent job. Looks like the MPU had some battery corrosion that was fixed.
-Tom
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
Nice Getaway. I'll take $2200 firm. I also just updated the code to M-5.
Quoted from tjc02002:Getaway $2500 or trade. Nice playfield. Cabinet reds faded but very consistently. Just completely torn down, cleaned, waxed, and rubbers/bulbs replaced. Central CT.
-Tom
image.jpeg
image_1.jpeg
image_2.jpeg
image_3.jpeg
Quoted from tjc02002:Nice Getaway. I'll take $2200 firm. I also just updated the code to M-5.
Williams Flash. Nice cabinet and playfield. Decent backglass. Nothing missing or broken but the game does not boot up. The lights on the MPU come on. I think it's probably a connector problem but I didn't mess with it. I was going to go through the game and shop it out but I am not finding the time. Ill take $500 as is.
-Tom
Quoted from fisherdaman:I'm looking for one too ...
Just out of curiosity, what would you guys expect to pay for this?
Jurassic Park in central CT. $2500 or trade. In very nice condition(pretty sure it's HUO but I don't like saying that). All stock and working 100%. I just went through and replaced the rubbers and any burnt bulbs and waxed the playfield. I might put chads new code in it in the next day or so. Thank you.
-Tom
Quoted from tjc02002:Jurassic Park in central CT. $2500 or trade. In very nice condition(pretty sure it's HUO but I don't like saying that). All stock and working 100%. I just went through and replaced the rubbers and any burnt bulbs and waxed the playfield. I might put chads new code in it in the next day or so. Thank you.
-Tomimage_(resized).jpegimage_(resized).jpegimage_(resized).jpegimage_(resized).jpegimage_(resized).jpegimage_(resized).jpegimage_(resized).jpegimage_(resized).jpeg
Chads code update installed. Much improved!!
-Tom
Quoted from djreddog:Get this to Allentown for me!
I wish I was going
1980 Eight Ball Deluxe. Was restored ~8 years ago. Very nice. Asking 3200 or BO or trade. Shoot me an offer.
Quoted from Irishbastard:Yup, bad link...Not Today ISIS
Thanks Eric for the pics, looks nice...Glwys
For non neacf members, here's what it says:
1981 all time classic bally. This was previously restored about 8 years ago and has been in a home ever since. The cabinet was re-stenciled and looks awesome. The backglass is almost perfect. The game is playing well but hasnt been shopped out in a few years. Drop targets look basically new, no broken plastics. Playfield had an overlay when restored and it looks really good. All displays are working properly. Has an alltek MPU. Asking $3200 or best offer. I'm also willing to trade for other pinball machines. Shoot me an offer.
-Tom
Quoted from tjc02002:Very nice Theatre of Magic for sale in central CT. $5800. Working 100% shopped out. Really nice PF and Cab. I put it on the pinball for sale Facebook group.
-Tom
(860)368-9708
The game is sale pending. Under deposit. Thank you.
Nice Stern ELVIS for sale. The game has just been cleaned, waxed and tuned up, working 100% and playing awesome. The playfield is in excellent condition. The cabinet is very good, a couple of scratches on the backbox sides as usual and flipper button protectors.
$3700.
Pics: https://photos.app.goo.gl/20zzN52G4WLmyln23
-Tom
Added over 7 years ago: Sold
Selling a super nice Theatre of Magic. $6400. Has a couple mods: velvet interior sides, light up mini clock tower, spinning saw blade. Playfield has no wear at all. Cabinet is almost perfect, has a few small minor scratches on the side of the backbox. Central CT.
-Tom
Quoted from tjc02002:Nip-It For Sale or Trade. Very good condition. Minor paint wear at hand hold location. Minor planking on playfield. Has been in my collection for ~4yrs.
Super nice game. $1200.
Quoted from tjc02002:Nip-It For Sale or Trade. Very good condition. Has been in my collection for ~4yrs.
$1000 takes this beauty home! Just need the space.
Quoted from Langless28:It was more of the vicinity thing too. But if you travel to CT/MA often, that would be great! PA is just too far for me.
He said in the post that he is making a trip to Meriden CT and he could bring it.
Quoted from tjc02002:Nice shopped getaway. Slight fade on the cab, nice PF. $2500. Central CT.
Quoted from tjc02002:hartford.craigslist.org link
This is sold. pending pickup.
Quoted from AntennaMan:I know I should know these things, because I looked at when I picked up Funhouse, but how long is it, how many pieces does it break into, and is there any chance it's a contact bowler?
He said in an earlier post “16 feet”.
Ive got a Sega Space Jam I am considering selling. I got the game from possibly the original owner as it is in stellar condition, however, the MPU has battery corrosion. The game isn't booting. I have cleaned off the corrosion and replaced the rom socket and chip but it still doesn't boot. The display comes on and shows display but the MPU is resetting. I could probably spend another few hours and get it booting but I am willing to sell because I need space and time. Price is $1500 firm.
Quoted from shacklersrevenge:WTB - Rottendog system 7 combo mpu/driver (must be a revision 1 or 2, and not the latest 3, unless they finally fixed the black knight issue with it?)
Pm if you have one and I’ll juice you up
I think the only difference between revision 3 and 2 is that they removed the system 7 games from the printing on the circuit board. I talked to rottendog about this and he said that they work 98% of the time in system 7 games but since there were a few of them(out of the hundreds installed in system 7 games) that he had to remove the "compatibility" even though they still work in system 7(same board just no printing calling out the system 7 games). the older revisions aren't going to have a better chance of working in your game.
Quoted from shacklersrevenge:WTB - Rottendog system 7 combo mpu/driver (must be a revision 1 or 2, and not the latest 3, unless they finally fixed the black knight issue with it?)
Pm if you have one and I’ll juice you up
You could also try one of these:
https://www.pinball-technology.com/produits/nw7/
MPU/Driver/Sound board combo. Plus its got some interesting features that let you change the sounds and add your own background music. I think its basically emulating the original hardware on a microcomputer. I actually have one of these and the NB2(in my globetrotters). The NB2 works well but haven't tried the NW7 yet, but im not selling mine. Contact the guy right off that site if interested. I think the NW7 is like around $400 shipped though...
Ive got an Eight Ball Champ im ready to move. Its got a really nice playfield and backglass. Cabinet is solid but the side art has a large area ripped off. Also once in a while the game plays the wrong sounds(I think the connector is flaky but didn't bother me as its barely noticeable when it happens). Otherwise the game is playing well and it is shopped out. Super fun game when you get into it. Id like to trade it for something else and I can add or subtract cash as appropriate. I could also sell outright if interested. Let me know, thank you,
-Tom
PS: Baller88 is a solid dude.
Quoted from tjc02002:Ive got an Eight Ball Champ im ready to move. Its got a really nice playfield and backglass. Cabinet is solid but the side art has a large area ripped off. Also once in a while the game plays the wrong sounds(I think the connector is flaky but didn't bother me as its barely noticeable when it happens). Otherwise the game is playing well and it is shopped out. Super fun game when you get into it. Id like to trade it for something else and I can add or subtract cash as appropriate. I could also sell outright if interested. Let me know, thank you,
-Tom
PS: Baller88 is a solid dude.
Still hoping for some trade offers on EBC. Outright sale im looking for 1100. Thanks,
-Tom
I’ve got a Williams Hot Shot Basketball “pop a shot” game. It’s a really fun kinda hard to find game. Uses Williams pinball boards and legs and fits perfectly in a pinball lineup(it’s not a pinball). Needs a few light bulbs Replaced but otherwise working 100%. Trade or sell. $1250.
-Tom
Ive got a nice Austin Powers im going to put up for sale. It was routed years ago and has some minor paint wear at the flipper buttons but its always been well taken care of and it shows. Its got full comet warm white LED's, and Titan rubbers. It has new Dr. Evil and Mini Me figures. Looks and plays 100%. $3200. Feel free to ask questions.
-Tom
Ive got a nice Eight Ball Champ. Uncommon fun game. Plays really well. Shopped out. Playfield is super nice. cabinet is solid but lower sides have some of the art peeled off. Looking to trade or sell for around 1200. Im in central CT. let me know. Im willing to add cash for trading up.
Quoted from shacklersrevenge:Free blow by Lemire with the purchase of this Maiden.
Quoted from the96stang:I have a mystery castle. Average shape. Can send pics tonight.
Ideally would like to trade for a newish stern. Imdn, Deadpool, or?
Ive seen and played this. Its in very good shape IMO.
Quoted from TheRave:Alien Poker still available. Dropped to $1200. Great shape. Boards rebuilt including interconnect. Very reliable game.
How the heck hasn't this sold yet. AP is a super fun game.
Quoted from dmieczko:Couldn't agree more. Tempted to just go grab it.
Don't mock me you weirdo.
Quoted from sparksterz:Agreed, had I not already had a Laser Cue it'd probably be more tempting.
ive always been interested in doing this multiball mod for AP.
http://www.pinball4you.ch/okaegi/pro_alienmulti.html
maybe nows the time...
Quoted from dmieczko:So, are you saying this game is "nice"???
I don't recall saying that...
Ive got both of these games still and I can bring to pintastic. I will probably bring memory lane for free play either way. Interested in trade offers as well.
-Tom
You're currently viewing posts by Pinsider tjc02002.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/northeast-us-for-sale-thread?tu=tjc02002 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
East Haddam, CT
