Quoted from digitaldocc:I have a swords of fury up for trade. Good exterior, shopped, mostly LEDs, and has a rottendog mpu. Playfield needs touch up TLC. I'd like to trade even or up plus cash. PM me to get a dialogue going.
PM Sent!
You're currently viewing posts by Pinsider GraniteStatePin.
Click here to go back to viewing the entire thread.
Quoted from digitaldocc:I have a swords of fury up for trade. Good exterior, shopped, mostly LEDs, and has a rottendog mpu. Playfield needs touch up TLC. I'd like to trade even or up plus cash. PM me to get a dialogue going.
PM Sent!
Bally Wizard! for trade. 100% up and flipping players condition with some typical cab wear and some pf wear as well. BG is mint. I can throw some cash in for the right game. Let me know
Quoted from herbertbsharp:Sorry my man, that was me. I've been wanting one forever, so it's a keeper and a restoration project. Big props to Bschafer for being an awesome seller!
Right on, I appreciate the reply. Good luck on the resto!
Anybody have a right side sling plastic for a Millionaire? Might take a set but really need a right. Thanks
Hi all, looking for 1 working numeric 7 digit display for my Millionaire. My P3 display is gone. May also be interested in a partial or complete working display board. Let me know what you have! Thanks
Looking for a friend so if you have one or more let me know and we can go from there. thanks. Looking for:
Addams
Williams Indy
Monopoly
Anybody have a playfield protector for Demolition Man?
Also need the upper flipper ramp A-17785
thanks
Anybody have interest in trading pinball for dirtbikes / 3 wheelers? I'm toying with the idea, may or may not change my mind, I'm really up in the air. Message if interested.
2001 KX500 - upgraded/extremely nice condition/low hour
1983 Yamaha YT175 - You'd be hard pressed to find a cleaner one
1985 ATC350X Nice overall rider condition
Added the YT175 I mentioned earlier into the listing, thought it was sold earlier at the time I made the ad
Not to sound like a party pooper but are these things really going for 6k+ and if so why!???
They look fun but wow..are they rare or something?
Card Whiz and Totem listed
Anybody interested in a project C.C. Hi-Flyer? BG very poor. PF actually pretty darn good. Cab ok. 2 lower drop targets plastic are half broken but work, uppers are fine. Can start a game and score but doesn't switch balls/end game. Needs to be thoroughly gone through. $400 as is? PM if interested and I can send pics. thx
Need Comet Plastic.
Anybody have a left slingshot plastic they don't want for a Comet? It's the one that says train station. Mine is completely missing, would prefer nice but some small damage is ok as its better than nothing. Any help is appreciated! thanks
Quoted from jibmums:Oh, it didn't look water damaged in person either. I feel terrible for the guy, he lives five minutes from me and was gutting his house after a fire. I stopped by immediately to check it out, I thought it was a scam also, but happy to report that it's for real and I'm on my way back now to pick it up. I didn't open it up yet (keys were gone) but cabinet and playfield looked just fine. Will post more once I get it home and assess.
Dude! Go buy a lotto ticket immediately! hahaha...unbelievable no matter the condition
Quoted from silen7ce:Anyone interested in a Dirty Harry? I grabbed one in a package. Has titans and leds. Plastics in really good shape. Throwing a credit dot for a sound issue but sound works fine… maybe a ribbon cable or rom…Needs one of the playfield hinges replaced or bent back into position. Cabinet is pretty nice with minimal wrinkle and no fade. Playfield has two wear spots.. around the bottom mode insert and one of the badge inserts…Top right magnet needs to be tweaked. Catches ball sometimes. Needs a cover plate for the dollar bill cut out…Looking for 3500 as is. Was an impulse buy and don’t have room. Ad coming shortly.
PM Sent
Quoted from Peruman:One for sale on the Trade Your Plastics thread
... you mean my want to buy Market ad?
Williams Flash for sale. Cab and BG show their age, PF is nice, fully working. Overall good players. Thinking $1300 ... ad to come later today
-Also have a Time Warp I may let go. BG is faded, overall nice condition but needs board work, just haven't had time to really dig in, I'm thinking Ram or pia and chip sockets (scanbe) may need to be replaced. I dropped in the board set from flash and game is fully working. Re-capped sound board
-mostly looking for cash but may entertain trade for project s.s. games
Anybody in here close to S.W. NH area or that goes to Western Mass Club have an extra early Williams ss widebody pf glass they don't need?
Anybody interested in a Terminator 2: Judgment Day Arcade? Original dedicated cab. Players shape with fading, scrapes, scratches etc. Shows it's age. Fully working. Thinking $1500 obo. Pics tomorrow. Possible trade for pins - working or projects. lmk
Anybody have spare NASCAR plastics? Looking for the big one that covers the magnets at the lower left, the clears that go over the launch Lane and one near the captive ball area that has the yellow flasher. Let me know. Thanks
Anybody interested in trading a pin for a massive video game lot. Games not consoles.
Atari
Nintendo Nes-GB-GBC-GBA-DS-3DS-SNES-N64-Cube-Wii
PS1, Vita, PSP
Sega Genesis- Dreamcast-Saturn
Rough value is $8K to 9K+
Bulk of the value is in Vita, Cube and N64
Would trade for a pin around the 5.5K mark, or maybe add cash for a higher value one
Mostly common stuff but a few gems here and there. Good to help fill in your collection or make some good money flipping/trading it. Can send pics if serious. Message if interested. thanks
Quoted from dddanielll:Thinking of putting my Haunted House project up for sale for somebody who wants to get it across the finish line. Did (hours of) touchups on the lower and upper playfield, came out pretty dang good. Main playfield isn't so bad but just don't think I'm going to get around to it. Game was fully working and complete when delivered courtesy of Colsond3. Asking $1500. DM if interested.
DM sent
PM if interested. Can possibly deliver to lakes region NH this friday-sun or New Haven CT area on Monday - or anywhere along my route
Haunted House - My first system 80, been jamming on it but just not my thing - nice game w/ touch ups to pf and cab head. Looks great. LED's
Jungle Lord - Overall nice. Cab shows planking in paint but has NOS playfields. LED's
Will try and get some proper ads soon
Prefer cash but might be into a trade.
Headed to Portland,ME this Saturday, can deliver my Striker Xtreme along that route if a deal is in place. Ad in marketplace
anybody have a SEGA / DATA EAST FLIPPER BOARD 520-5080-00? Working or untested/not working considered. thanks
Quoted from scootss:The rottendog boards can work but need a review and possible fixes, in case you end up going that route...
https://pinside.com/pinball/forum/topic/rottendog-flp023-data-east-flipper-board-issue
Appreciate the link, I'd love to find an original if possible
Quoted from gdonovan:I have a JP one lurking in my repair pile but I think you are looking for a different revision correct?
According to manual JP is 520-5033-03. Looks like connectors CN1/CN2 are 12 and 12 wire where mine is 9 and 10. Thanks though
Quoted from sagejr:Don't forget about the pinside sales fee that you'll be paying once you place the ad and sell it through the marketplace...
"That's how they fry your banana!"
You're currently viewing posts by Pinsider GraniteStatePin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/northeast-us-for-sale-thread?tu=GraniteStatePin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.