Still looking for any stern LCD pros. Will trade a nice no fear plus cash, or just straight cash.
Still looking for a Bally Series 2 board. Came from the home models of Captain Fantastic, Fireball, and Galaxy Ranger.
Quoted from the96stang:Still looking for any stern LCD pros. Will trade a nice no fear plus cash, or just straight cash.
Quoted from sparksterz:For real...I've NEVER_ seen that. Not even sure what would cause it. There's usually not significant enough weight there for that to occur. Transformer's aren't light, but to pull the bottom down that much? Was it living in 100% humidity?!
Over the years I've replaced the bottom on three or four pins, all failed due to moisture. Worst was a Goldwings that was on the floor at the sellers house, looked good to me, unfortunately I didn't realize it was soaked until I had already paid. Women offered to give me my money back as I was lifting it up and mumbling WTF. I took it anyway. Cab came out good, as did my others...just give the measurements to the employee in lumber at Home Depot and you don't even have to cut the new wood at home.
Ad is officially up. Trade only. Message me with anything. Better pics will go up this weekend but anyone that knows IIA has played this game
Quoted from mpdpvdpin:Seems like it is a gold by the serial # Definitely surprised no one has bit the bullet yet. If it were closer to me I’d prob snag it.
Bringing this full circle - I ended up getting it
My hope was that it was an upgrade to my current Addams. It’s very close to the same and here’s why:
First, confirming it’s not a Gold. (My current isn’t either). The sides are decals, the trim was put on along with the apron, but the caps of the pops and the Thing box are painted originals. Playfield is in pretty good condition, overall better than mine. Plays great! The lights are out because of a burned connector, which is no big deal. So overall, happy with it. Yes the bottom is watered up and needs to be replaced, but it also looks like it had been replaced before which should make it easier to replace again with better wood. No way what’s on there now was original. I’m not concerned about any of this stuff.
So In the end, there are ways my current TAF that I’ve had is nicer, and ways that this one is nicer. I just need to decide if there’s anything worth Frankenstein-ing or not.
Quoted from Butch2099:I might list my Addams Family, amazing condition, easily could pass for HUO, but I don't know the history on it. Nicest unrestored one I've ever seen. Going to be at the top end of what Adams have been going for. Probably won't be able to do an official ad or get pictures until Christmas Day.
Your TAF is in amazing condition, I don't think you'll ever come across another original in this condition again unless it's a NIB remake which of course wouldn't be an original lol.
Looking to buy something to freshen up the line up that won't break the bank too bad ($4k - 8k ish). Big fan of 90s pins so some that come to mind: Earthshaker, Whirlwind, Creature, RCT, RBION, TOM. Need not be perfect or collector quality. Players condition ok. Prefer 100% working but open minded. Let me know what you have TY.
Quoted from jackd104:Looking to buy something to freshen up the line up that won't break the bank too bad ($4k - 8k ish). Big fan of 90s pins so some that come to mind: Earthshaker, Whirlwind, Creature, RCT, RBION, TOM. Need not be perfect or collector quality. Players condition ok. Prefer 100% working but open minded. Let me know what you have TY.
CFTBL
https://pinside.com/pinball/market/classifieds/ad/125635
Quoted from jackd104:Looking to buy something to freshen up the line up that won't break the bank too bad ($4k - 8k ish). Big fan of 90s pins so some that come to mind: Earthshaker, Whirlwind, Creature, RCT, RBION, TOM. Need not be perfect or collector quality. Players condition ok. Prefer 100% working but open minded. Let me know what you have TY.
https://pinside.com/pinball/market/classifieds/ad/125183
NGG
Still looking to trade out my loaded huo stranger things plus cash can be worked either way
Roadshow
Revenge from Mars
Tales from the Crypt
Monopoly
Munsters
Twilight Zone
Lord of the rings
AC/DC
Family Guy
Wonka
ToM
Open to DMD titles
Message Me
Also add
The Walking Dead
Added over 2 years ago:NLA - Decided to Keep
Loaded Maiden Pro on the market. Topper, laser cut powdercoated rails, tons of extras
Price drop on JD, down 200.
Still have TNA for trade if anyone is interested... ad now has more pics
Figured I'd cross post here for those that may be looking for a nice Roadshow. Happy holidays!
Looking for:
Pinbot (players condition)
Caribbean Cruise (any condition or non-working)
Pinball Magic
Package deals considered for any two listed.
Quoted from per3per3:Figured I'd cross post here for those that may be looking for a nice Roadshow. Happy holidays!
Machine - For Sale
For sale or trade: Road Show
New!
Fully shopped/refurbished “Really nice Roadshow with zero playfield wear, plays 100%, and is loaded with extras. This machine has the following mods/extras: colorDMD, full non-ghosting LEDs, rare interactive...”
14 hours ago
Vienna, VA
5,500 (Firm)
per3per3
PM Sent
Slight price drop the other day. A few interested parties, but still available at the moment.
Anyone selling any stern pros in New England to buy a RUSH? Ideally deadpool, jurassic park or Munsters (or all 3!)
Interested in trading my Houdini (very nice condition, plays great, with a handful of "tasteful" mods included) for multiple early-to-mid-80s solid state games, ideally in decent and playing condition, but need not be museum pieces. Happy to provide more info and discuss ideas by PM.
Looking to trade out my Party Zone plus cash for something else
It’s Autographed by Dennis Nordman & Greg Freres on the Backglass
Players Game - Not Perfect but plays very well
Shipped out / New Star Posts
New Bi-Directional Motor Board installed
Willing to add up to 3000$ cash on the glass plus Party Zone for another pin
If you want it outright $3000.00
Message me
Quoted from the96stang:Anyone selling any stern pros in New England to buy a RUSH? Ideally deadpool, jurassic park or Munsters (or all 3!)
If anyone is interested in a Waterworld for $2200 or so, let me know. Going to be listing it soon hopefully. Plays great, LEDs. Some flipper wear that someone in the past touched up and mylared.
Tossing this out there possibly looking to trade my HUO R&M BSE later run machine in the mid 600's with all the latest fixes already done. R&M has the speaker LGB lights, speaker grills, side rail portal lights, side blade artwork, scary terry, rick and morty figures added, pinball life shooter lane ramp, purple coin door, UV lighting kit, additional back box led lighting, plastic protectors, blue led crystal mod and maybe a few others that I'm forgetting.
I'm the original owner.
Looking for a MMr
Quoted from DeathHimself:Tossing this out there possibly looking to trade my HUO R&M BSE later run machine in the mid 600's with all the latest fixes already done. R&M has the speaker LGB lights, speaker grills, side rail portal lights, side blade artwork, scary terry, rick and morty figures added, pinball life shooter lane ramp, purple coin door, UV lighting kit, additional back box led lighting, plastic protectors, blue led crystal mod and maybe a few others that I'm forgetting.
I'm the original owner.
Looking for a MMr
Straight shooting guy, highly recommend.
I have a very nice TSPP with shaker, full led, color dmd, art blades and other misc mods. Beautiful playfield and cab.
Only issue is upper pf kicker coil is weak.
Want to trade this pin with cash on top for a Vault AC/DC LUCI or Vault Met Premium
Game is in central Connecticut if you would like to check it out
Quoted from stretch2:Machine - For Sale
Vacation America
New!
HUO - Undocumented (Home Used Only) “Selling a Vacation America built by Chicago Gaming.
Lots of fun for not very much money, especially in the current secondary market.
Only 530 were built.
Local pickup in Baltimore,...”2 hours ago
Baltimore, MD
1,499 (OBO)
stretch2
Is this the one that was listed for free on CL last week?
Anyone looking for a Stern Playboy that is reasonably priced? Send me a PM. Trades welcome with + or - cash.
Thanks for all the interest. Game is sold.
1980 Bally Rolling Stones - For Sale if anyone is interested. Very nice cabinet and back glass. Playfield was nicely touched up in areas and sealed. Playfield protector installed, full LEDS and alltek lamp driver board installed. Shopped with new rubbers, ball and brand new pop bumper caps. Magnetic Rolling Stones Apron iinstalled. Driver board rebuilt with new capacitors and regulated. No missing digits. New Legs and teflon leg levelers. I a lot of love went into this machine.
PM if interested.
Trades for newer Stern Pinball machines considered.
TNA still for trade ...... what do you have? + or - cash Top of my list are Transformers, Beatles, Stern IJ, Funhouse, R&M and TAF. Not interested in Halloween or Ultraman (got 5 different trade offers for those titles)
DO YOU NEED TRANSPORT?? Offering up transport from RI (in and around area) to upstate NY (in and around that area). Let me know what you need and I’ll give you a reasonable price (it will be a hell of a lot cheaper than STI rates). I’ve moved over 150 pins in my time in this hobby, so hopefully that gives me some street credit? I’ll be making the trip in roughly 3wks. Let me know what you got!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/northeast-us-for-sale-thread/page/458 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.