Ready to let my Family Guy restoration go. Truly the nicest one you will ever see. Has to be seen in person to be appreciated.
Ready to let my Family Guy restoration go. Truly the nicest one you will ever see. Has to be seen in person to be appreciated.
Quoted from Pinballmike217:Ready to let my Family Guy restoration go. Truly the nicest one you will ever see. Has to be seen in person to be appreciated.
Machine - For Sale
Family Guy - true CQ High End Restoration
New!
Fully restored (full original status) “Family Guy pinball restored to the highest level possible. NOS clearcoated playfield, mini playfield also clearcoated. Full chrome package with lots of chrome under the playfield a...”
2 hours ago
Topsfield, MA
12,000 (OBO)
Pinballmike217
Quoted from Pinballmike217:Ready to let my Family Guy restoration go. Truly the nicest one you will ever see. Has to be seen in person to be appreciated.
[head scratcher]
Machine - For Sale
Family Guy - true CQ High End Restoration
New!
Fully restored (full original status) “Family Guy pinball restored to the highest level possible. NOS clearcoated playfield, mini playfield also clearcoated. Full chrome package with lots of chrome under the playfield a...”
6 hours ago
Topsfield, MA
12,000 (OBO)
Pinballmike217
EM Captain Fantastic Project. Really nice glass, decent playfield and cabinet. Game will not start reset sequence, and credit wheel needs to be re-assembled 400.00 OBO
Finally put up my MBrLE for sale...it is like new and plays perfectly. Would also consider the following trades: a nice TZ or Road Show plus cash. Would like to avoid shipping, but easy loading via a walkout basement with no stairs
FS: Funhouse w/ fully rebuilt Rudy head (all new parts coils etc...professionally done) BRAND NEW ramps, stainless mirror blades, full led GI and Inserts, color matched flashers. Mylar in good shape with minimal lifting. Few spots of visible wear in the typical areas. Comes with two flipper rebuild kits $4200 firm.
* upper left flipper coil currently overheating after replacement. Most likely the 250V capacitor needs replacement. I have the part...but not the time. Sale as is atm.
Selling my HUO AFMSE. A few tasteful mods. $7000 OBO. Not interested in trades at this time.
https://pinside.com/pinball/forum/topic/for-sale-attack-from-mars-remake-special-33
Quoted from jespo_19:$2100 Earthshaker. Had 2 different folks interested, but radio silence or delays have lead me back. Plays 100%.
Don’t forget Bobby Orr too.
Quoted from Whridlsoncestood:Don’t forget Bobby Orr too.
True story, Bobby Orr FS 800. In a limited edition Freedom Cabinet lol.... Plays great though, comet LEDs, new MPU too, the original "powerball" game too. Game is currently located at Sanctum in ct. PM for more info.
Quoted from Matesamo:Oh man, that is a great price and would be a fun spring cabinet stencil project!
A Freshly painted Bobby Orr cabinet really pops.
Revenge from Mars f/s. Updated code, no credit dot, shaker motor installed. $3200 Easy load out w/no stairs.
https://pinside.com/pinball/forum/topic/for-sale-revenge-from-mars-86
And it's the opportunity to put Bobby in the right colors
Quoted from Whridlsoncestood:A Freshly painted Bobby Orr cabinet really pops.
Anyone have 1 or 2 nice pieces of playfield glass to sell?
The ones on my pinbot and Addams are pretty beat.
Invisiglass or similar is great, but also happy to pick up standard glass that’s in great condition.
Hopefully within a 2 hr drive of metro Boston...
Thanks!
I have a No Fear for sale or trade. $2,800. Clean game with awesome playfield with LEDs. Faded lower cab decals. Have no fear, my house is Corona free.
Quoted from sagejr:I have a No Fear for sale or trade. $2,800. Clean game with awesome playfield with LEDs. Faded lower cab decals. Have no fear, my house is Corona free.
glwts impeccable seller.
https://pinside.com/pinball/market/classifieds/ad/93254
Revised my ad for trading of my
Class of 1812
Willing to add 1500$ in cash and drive 3 hours or so of driving
Free Allentown Delivery but unsure of the shows status right now
Message me with offers
Routed Sterns Welcome / DMD projects ok also
Market ad is up.
Quoted from sagejr:I have a No Fear for sale or trade. $2,800. Clean game with awesome playfield with LEDs. Faded lower cab decals. Have no fear, my house is Corona free.
Quoted from Bospins:Anyone have 1 or 2 nice pieces of playfield glass to sell?
The ones on my pinbot and Addams are pretty beat.
Invisiglass or similar is great, but also happy to pick up standard glass that’s in great condition.
Hopefully within a 2 hr drive of metro Boston...
Thanks!
Just have a local glass shop cut you some. That's what I usually do for my games. Comes in cheaper than Marco.
Quoted from Rascal_H:Looking to free up some cash to cover moving expenses.
I’d be all over this if I didn’t just pick one up in NJ. GLWTS. Great game. The whole family loves it.
Machine - For Sale
Attack From Mars (Remake - Special)
New!
HUO - Documented (Home Used Only) “HUO AFM SE. 2nd owner. Full Cliffy set installed. Looks like new. Will try to get pics up.
Local sale. Must pick up.”
9 hours ago
Wrentham, MA
6,800
Rascal_H
Quoted from nerdygrrl:Just have a local glass shop cut you some. That's what I usually do for my games. Comes in cheaper than Marco.
I’ve had really bad experiences with 2 local glass shops. Maybe I should try again.
I did get a quote a few months and for tempered glass they wanted $100/sheet, which is the same as Marco with shipping.
I was hoping someone local was an invisiglass-only person and had standard pieces lying around collecting dust...I’d give them a few bucks, they free up space, no shipping or tax, and I meet a new local pin head.
Quoted from Bospins:I’ve had really bad experiences with 2 local glass shops. Maybe I should try again.
I did get a quote a few months and for tempered glass they wanted $100/sheet, which is the same as Marco with shipping.
I was hoping someone local was an invisiglass-only person and had standard pieces lying around collecting dust...I’d give them a few bucks, they free up space, no shipping or tax, and I meet a new local pin head.
Try to find out if someone is going to the show to sell glass. It's usually dirt cheap there.
I too had issues locally. I'm no glass expert, but I believe the glass is cut first, then tempered so you can't just walk into any old glass place and pick some up.
Quoted from eabundy:EM Captain Fantastic Project. Really nice glass, decent playfield and cabinet. Game will not start reset sequence, and credit wheel needs to be re-assembled 400.00 OBO
Hi, do you still have this available?
Thanks, Michael
Quoted from Bospins:I’ve had really bad experiences with 2 local glass shops. Maybe I should try again.
I did get a quote a few months and for tempered glass they wanted $100/sheet, which is the same as Marco with shipping.
I was hoping someone local was an invisiglass-only person and had standard pieces lying around collecting dust...I’d give them a few bucks, they free up space, no shipping or tax, and I meet a new local pin head.
Same here. Every place I call wants $100+ for tempered glass. Marco is still looking like my best solution.
Quoted from bluebomber:Same here. Every place I call wants $100+ for tempered glass. Marco is still looking like my best solution.
Pinfest sells standard glass for @ $35, the show is now scheduled for June.
As far as a local glass cutting some - this is not good; that is plate glass, non-tempered so if it should break it will be in large pieces that could cut you very easily/bad. I have had several machines I've purchased with plate glass, but I always get rid of it & replace it with tempered (safety) glass.
Quoted from bluebomber:Same here. Every place I call wants $100+ for tempered glass. Marco is still looking like my best solution.
Pinballife was something like $79 for two sheets last time I bought glass.
Quoted from ckcsm:Pinfest sells standard glass for @ $35, the show is now scheduled for June.
As far as a local glass cutting some - this is not good; that is plate glass, non-tempered so if it should break it will be in large pieces that could cut you very easily/bad. I have had several machines I've purchased with plate glass, but I always get rid of it & replace it with tempered (safety) glass.
My place gets tempered glass for me, they order it out. Last couple of sheets were $60-80
Quoted from nerdygrrl:My place gets tempered glass for me, they order it out. Last couple of sheets were $60-80
That's fine, after it's cut they can have it tempered.
Ivan at Pinfest has had several sizes available at the show; I've picked up several sheets the last two years.
Selling a fully shopped POTC for 4600 ad is in the market
Quoted from nerdygrrl:My place gets tempered glass for me, they order it out. Last couple of sheets were $60-80
Have you tried pinball resource? I don’t know what size you need but he sells a standard 21x43 for $30 a sheet If I remember correctly but they come in 2 packs. Well worth it. Maybe someone can chime in here. It’s been a while.
Quoted from Murphdom:Have you tried pinball resource? I don’t know what size you need but he sells a standard 21x43 for $30 a sheet If I remember correctly but they come in 2 packs. Well worth it. Maybe someone can chime in here. It’s been a while.
I'd just wait till Allentown, $35 a sheet.
Quoted from Murphdom:Have you tried pinball resource? I don’t know what size you need but he sells a standard 21x43 for $30 a sheet If I remember correctly but they come in 2 packs. Well worth it. Maybe someone can chime in here. It’s been a while.
They haven't been on the website for a while (at least a year) but who knows. Always worth calling and asking.
Quoted from Bospins:Anyone have 1 or 2 nice pieces of playfield glass to sell?
The ones on my pinbot and Addams are pretty beat.
Invisiglass or similar is great, but also happy to pick up standard glass that’s in great condition.
Hopefully within a 2 hr drive of metro Boston...
Thanks!
I bought a sheet of glass from Mike Jr. at Automated for $40. It's was a short ride for me though.
Quoted from radial_head:They haven't been on the website for a while (at least a year) but who knows. Always worth calling and asking.
Always worth a call. Needed a 7 digit display glass which is listed out of stock and he still had an NOS unit on the shelf.
Quoted from sagejr:I bought a sheet of glass from Mike Jr. at Automated for $40. It's was a short ride for me though.
I'm thinking about buying a machine from him so maybe I'll just wait until I'm ready to do that, and then replace them.
One pinsider had an extra, picking it up later today.
Quoted from Murphdom:Have you tried pinball resource? I don’t know what size you need but he sells a standard 21x43 for $30 a sheet If I remember correctly but they come in 2 packs. Well worth it. Maybe someone can chime in here. It’s been a while.
I just purchased standard size from Steve. It was $51 plus a $20 freight charge. Not the cheapest route for sure. But I needed it. The last time I checked at my local glass company, they would do one for about $60.
Quoted from stashyboy:I just purchased standard size from Steve. It was $51 plus a $20 freight charge. Not the cheapest route for sure. But I needed it. The last time I checked at my local glass company, they would do one for about $60.
I had a local glass shop make a piece for me before for an oddball size game. It took a week and cost about $70. They cut the glass but then sent it out for tempering. It took 2 trys as the first one shattered during tempering. They even put a micro bevel on it for me.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/northeast-us-for-sale-thread/page/319?hl=bluebomber and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.