If any of you are building a custom machine or thinking of building one, Sacramento local cobra18t has a new controller board that he developed to work with Mission Pinball Framework. I have worked with him for years and he does some amazing engineering. Check out the kickstarter here:
http://kck.st/2KjE8B1

pasted_image (resized).png

Looking for an Alvin G PCA-019A power supply board. I have been playing whack a mole troubleshooting it. Replaced a few caps and a bridge rectifier. Now I get 76v on the 48v line.

29E774AC-F3DF-43F1-834D-B1F81CB8A07E (resized).jpeg

Thank you for your help. I did not see that on the versions of the schematic I have. I gather that the RMS is 76 so that is what the meter may be reading. I am troubleshooting an issue where the game shuts down and restarts randomly. I replaced the caps in the 20v and 5v so far. They needed to be done even though they measured ok. The lights are far brighter. The shutdown issue is still present. I have the 48v cap on order as my next step. The bridge rectifiers measure ok. I replaced the one on the 20v and have another on order for the 48v just in case.

Looking to trade a Pinball Brothers Alien for a Spooky Rick and Morty. I may bring it to PAGG.

Any recommendations for a service to fix this Triple Strike EM from 75. A friend in Davis has two machines and he wants one working one out of the two. It is working sporadically. Sometimes will play a ball and other times it will get stuck firing solenoids.

328C724B-ADC6-4C2B-8EF1-1ACE1815F0C5 (resized).jpeg

4EC05323-6FF5-45C6-A185-459369A86475 (resized).jpeg

ABB866F1-C7F3-4295-AFE4-BB429A90C8F2 (resized).jpeg

What kind of van is the pinwagon?

deleted

That T2 looks really nice!

Cobrapin will be there selling boards for homebrews.
I am going Friday.