Deadpool (Pro)
Stern, 2018You're currently viewing posts by Pinsider Blake.
Click here to go back to viewing the entire thread.
Could probably find it here using the search function: https://www.alliedelec.com/product/nichicon/rl81c221mdn1kx/70188101/?gclid=Cj0KCQiA37KbBhDgARIsAIzce15ln-EcvUwYV3ceoc1OC1ZFUPLYTCj30eOxEDAvn8Pj5Prq-7y3XHUaAukwEALw_wcB&gclsrc=aw.ds
If not ask for the schematics for the node board or inquire about its specs (uf/voltage/type) with the manufacturer. Give them the board location and go from there.
https://www.mouser.com/datasheet/2/293/e_rne-1919110.pdf
This gives a good breakdown. 470uf is the capacitance/16v is the voltage. If at all in doubt check with the manufacturer or mouser/digikey tech support.
Example: https://www.lcsc.com/product-detail/Solid-Capacitors_Nichicon-FP-016RE471M-NECG_C428866.html
Quoted from playa:Thanks for the data sheet... so, I have that capacitor (470uf 16v). I do think though that this serves as a helpful hint to anyone experiencing intermittent drops in power while playing. Gotta assume mine isn't the only one with super poor connections or broken legs
No problem. Just make sure it’s a low ESR, 105 degree cap and you will be fine.
You're currently viewing posts by Pinsider Blake.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/node-board-8-520-7017-72-capacitor-id-needed?tu=Blake and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Vergennes, VT