Take a picture of the power supply board, its the board on the top left in backbox. The harness on the right side i think its CN8 burns up.
(Topic ID: 291615)
Linked Games
Lethal Weapon 3
Data East, 1992
Topic Gallery
You're currently viewing posts by Pinsider Phbooms.
Click here to go back to viewing the entire thread.
Quoted from Ramrod215:[quoted image][quoted image][quoted image][quoted image]
Did you unhook the wire harness at CN8 for the pics? Who did the work on that? Id plug it back in and fix that double yellow wire correctly and see what happens.
My game doesn't have that fuse in the cabnient.
20210414_220035 (resized).jpgQuoted from Ramrod215:I reconnected the wires and awaiting the connectors to rebuild them and I noticed the fuse F3 was desoldered from the powwr board. So maybe they moved fuse to the bottom of the cabinet. I got fuse holders coming also to put that back in.
The two yellow wires are weirdly spliced and another wire is twisted and held with electrical tape. So I will fix these connections but don't know if both yellow wires go to the same part of the cn8.
Can someone provide me with a good picture of a functional powersupply board, CN8 connector and the fuses right next to it.
The 2 yellow wires are suppose to be tied together going into the harness. I stuck them both in the same crimp but made the one wire have alittle more exposed wire to make them both fit. F3 fuse was popping on my board too. The relay right behind the CN8 connector was bad but i just bought a new board instead of fixing it but wish i would of just spent the $5 for the relay and just did the board work myself now. I can take pics of it if you want but my board isnt original.
Quoted from Phbooms:The 2 yellow wires are suppose to be tied together in the harness. I stuck them both in the same crimp but made the one wire have alittle more exposed wire to make them both fit. F3 fuse was popping on my board too. The relay right behind the CN8 connector was bad but i just bought a new board instead of fixing it but wish i would of just spent the $5 for the relay and just did the board work myself now. I can take pics of it if you want but my board isnt original.
Quoted from Ramrod215:Thank you for the information! I will check out the relay also when I have the board out.
I was looking for a oem board picture to do a comparison to see if anything is off with mine. I have a power board from marco I hope I don't need to use.
i can post pic of the old board if you want but its not in the machine. Let me know if you need any pics of anything!
Promoted items from Pinside Marketplace and Pinside Shops!
Plantsville, CT
You're currently viewing posts by Pinsider Phbooms.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
