Hello to all.

I am now opening a new list for a reproduction playfield of No Good Gofers.
The playfield will, approx, cost 700 Euro and the shipping approx 95 Euro.
We do not have a delivery date yet. The first test millings will run this year.
In January we will start the production.
If you are intrested, please mail to [email protected] and I will add you to our list.

Next year we will also start with Road Show Playfields, as soon as all is sorted out Ill open a pre order list for them as well.

Regards from Hamburg
Peter
Our hearts are pumping Pinball parts.

Hello to all
Wish you all a Happy New Year and all the best for 2016
We have some orders in for the No Good Gofers 1st run, but its not enough yet to start of the production.
Just wanted to let those people know, who pre-ordered, that we didnt start yet.

Regards from Hamburg
Peter

Hello to all.

At the moment it is not alot of intrest for NGG repro playfield. I have taken F-14 first allthough all is set up for NGG.
Once I completed the 3rd Run for BOP and the first run for F-14 I will start on NGG. Its a risk but I want to help those people that
have pre-ordered.

Many thanks
Regards from Hamburg
Peter

Hello to all.

We are now finally online. http://www.perfectplayfields.com/
It was a battle, not the solution we wanted, but now we are online with a few parts.
We will still need alot of hours to optimze all

Regards from Hamburg
Peter

We are going to run them after the rerun of BOP.
A new pre-order list will start soon, we are starting to get
the art files cleaned. The inserst are being made.
Maybe we can start off the production in December.

Regards from Hamburg
Peter
www.buthamburg.de

Hello to all

If you are on the old list it is no need to sign up again. I will write you an email though because it has been some time ago
since you signed up.
We have now finished Getaway playfields and are busy doing the BOP re-run. Then its NGG and Road Show.

You are always welcome to stock playfields so that you can combine the shipping, no problem. But when
your playfield is finished produced, I would want the payment for it at that stage.

If you wish to be on the NNG List, then please send me an email directly to [email protected]
with your postal address.

Regards from Hamburg
Peter
www.buthamburg.de

Hi

Please contact me directly. My email is [email protected]
Then I can put you on the list.
We are starting to set up all for NGG.
The milling will start in March.

Regards from Hamburg
Peter
www.buthamburg.de

Hello to all

We have a delay on the NGG Playfields for we have the wrong inserts.
Its the small recktangular inserts, the inserts we have dont have the star burst pattern.
We are busy tooling up to make the correct insert.
It is still in the line and will start approx in June / July this year.
We have decided to rerun the Terminator 2 playfields first.

Regards from Hamburg
Peter
www.buthamburg.de

Hello to all

No Good Gofers will start in the 3 weeks time.
We have just finish milling F-14, now we are milling Alien Poker,
After Alien Poker we will sett up the milling machine for NGG.

Have a nice day
Regards from Hamburg
Leon and Peter

Hello to all

We have a slight delay on NGG. The insert tool for the missing inserts is nearly finished.
Next week we should beable to bring the tool to the plastic company.
In the mean time we will mill the Bride of Pinbot playfields.
If you wish to jump in the NGG run, please send me an emal directly to [email protected]
with your postal address.
Have a nice Sunday

Regards from Hamburg
Leon & Peter

Hello to all

Today we have done the final check on the milling program. All parts fit neatly.
We are ready to rumble. Tomorrow we will start milling the re-side.
Here is a picture of the sample milling with parts mounted.
Have a nice evening

Regards from Hamburg
Leon and Peter
www.buthamburg.de

IMG_9205 (resized).JPG

Hello to all

Tomorow we will be finished with milling the rear side.
We will then start milling the top and start gluing inserts.
Getting on nicely.
If you wish to be on our Pre-order list, then please send me an email directly to peter at buthamburg dot de.
We still have 7 boards available.

Regards from Hamburg
Leon and Peter
www.buthamburg.de
As soon as we have some time, we will start to upload our new Homepages.

Hello to all

We are busy gluing, sanding inserts. Today the first NGG Playfield recieved its primer.

We will update regular.
Regards from Hamburg
Leon and Peter

IMG_9207 (resized).JPG

Hello to all

The pictures are showing the cavity of the golf ball insert and the insert glued to the playfield.
We decided not to polish the scructure from spark iroding, gives the insert a nice slight difuse look.
The insert is Illuminated with LED light. The golf ball structure in the insert came out very nicley.

Regards from Hamburg
Leon and Peter

20190828_175059 (resized).jpg

20190830_100119 (resized).jpg

Hello to all

Here is a short update on the No Good Gofers.
We have now printed the white, it came out fantastic.
9 Colors to go. We will update regular.

We have launched our new home pages, www.buthamburg.de
You will find more playfields and plastic parts which we manufacture.

Have a nice day
Regards from Hamburg
Leon & Peter

White No Good Gofers 2020 (resized).JPG

Hello to all

Today we printed the yellow, it turned out very nice.
We will keep updating.

Regards from Hamburg
Leon and Peter

WGelb No Good Gofers 2020 (resized).JPG

Hello to all

Today we printed the Tan and the Light Blue.

Regards from Hamburg
Leon and Peter

Wblau No Good Gofers 2020 (resized).JPG

Yippi Yeah we have printed the Violett and Dark Blue. Both colors turned out very nice. All is working very good at the moment, 4 colors to go.

Have a nice Weekend
Regards from Hamburg
Leon and Peter

WD-Blau Violett No Good Gofers 2020 (resized).JPG

Good evening to all.
Yesterday we started to print the green. We discovered a disturbing pattern in the raster. It does happen sometimes
that the dots of the raster get disturbed by the silkscreen mashes. We have worked over the green files and have sent them out to get the negative made. Doesnt all work out as thought. So far we have the most colors printed neatly on.
Only 4 colors to go. We only printed this one board, it was damage in previos pints.
In the time that we wait for the negatives, we will continue milling the T2 playfields and the plastic sets.
Road Show playfield must get sanded, then they are ready for printing.
Regards from Hamburg
Leon and Peter

IMG_9413 (resized).JPG

IMG_9416 (resized).JPG

Hello to all

While we are waiting for the negatives to get the silkscreens made, we eventually have some spare time to get
some our plastic parts finished. The first and second picture is showing the mounting of the light domes on the Prob Covers for STTNG.
Inbetween we are milling the last Terminator 2 Playfields, shown on the third picture. 5 Boards to go, then we will start with the Playfield Plastic Sets for Terminator 2. After the Probe Covers are finished, we started reviting the Road Show, Funhouse Cranks, A-19258, will still take some time, over 4500
Cranks, 9000 revits... Dont think that we will finish them today. The Cranks are shown on picture 4. While Leon is setting the revits, there is alot of time to get the new produced old Bally Bats packed 20-9592 shown on picture nr. 4
Sorry, a bit of topic.. But, tomorrow we are going to receive the new negatives for green and magenta, we discovered mistakes in magenta as well.
We will get the screens to the screen maker tomorrow, if all goes good, then we can continue printing NGG on Friday.

We will keep updating the printing of NGG
Have a nice day
Regards from Hamburg
Leon and Peter
www.buthamburg.de

IMG_9420 (resized).JPG

IMG_9421 (resized).JPG

IMG_9422 (resized).JPG

IMG_9426 (resized).JPG

IMG_9429 (resized).JPG

Hello to all.
We will receive the screen this afternoon. Yeah..... This afternoon we will continue to print the No Good Gofers Playfields.
Say, did nobody notice a mistake in light blue?
We have discovered a quite big mistake in light blue.
Not serios, we have made a Negative and a screen to reprint
that area.
Here is a deal, the first to post the mistake , on Facebook, https://www.facebook.com/buthamburg.de/
in light blue will get a 10% discount on the No Good Gofers Playfield. The first right post will receive the discount.
We will start preperations now for the printing, Today we want to get the green done, heart beating, its a big area and quite a few color flowing dots. The green paint is mixed, green gets printed on to the yellow. The transparent green needs to be adjusted darker in ton, the yellow will shine through the transparent green and lighten it up. Same in other areas, the green gets printed ontop of dark blue, gives the darker green efect, and the same in the lettering, green on white, will give you the light green. Test print was good, color matched nicley.
Happy searching for the mistake in light blue
Regards from Hamburg
Leon and Peter

Today we printed the red color. Green was not possible for
the screen motive is copied into the screen twisted. No Idea how that works, but the screen maker did it
Tomorrow we will print the brown and print the repair in light blue.
Did nobody see the mistake yet? Its 2 inches long.

Regards from Hamburg
Leon & Peter

IMG_9453 (resized).JPG

Good morning

Yes you have discovered the mistake that we saw. The arrow tip under the wheel has been mentioned before.
That was the first mistake discovered. You can also look on www.buthamburg.de If you find parts you need,
its 10 % for you until the same worth of a NGG Playfield.

We will now start repare printing the light blue. 3 different print areas.
If all goes well, we might still print the brown today

Regards from Hamburg
Leon and Peter

Hey all
Toady we have printed the light blue repair print. Work out very nice. Tomorrow we will print the brown.
Now some time for a Beer
Have a nice evening
Regards from Hamburg
Leon and Peter

IMG_9456 (resized).JPG

Hello to all

Today we printed the brown.
The green screen is back at the screen makers, we mostlikley get it tomorrow. All good things go by three.
Playfield is looking good, specially if you lay the black Film over it. Maybe we will take a picture with the black film over the print tomorrow while we are wait the screen?

Regards from Hamburg
Leon and Peter

IMG_9463 (resized).JPG

Good evening.

Today we have started to print green.
The first boards look great.

Have a nice evening.

Regards from Hamburg.
Leon and Peter

IMG_9464 (resized).JPG

Hello to All.
Today is beer time.
We proudly annouce that we have sucsessfully finished printing No Good Gofers.
Here is a picture of the original and Buthamburg Playfield.
Only today you can see what the last months of hard work turned out like.
We are very happy that the out come is quite perfect.
We wish all a nice day.
Regards from Hamburg.
Leon and Peter.
www.buthamburg.de

IMG_9468 (resized).JPG

Thank you

Yes, the milling is done after the first clear coat.

Hello to all

We have 2 NGG Playfields on stock from the previos run.
Sorry, we didnt find the time to update our home pages.
If you wish to purchase a NGG playfield, then please send an emial to peter(et)buthamburg.de

Regards from Hamburg
Leon and Peter
www.buthamburg.de