(Topic ID: 146400)

No Good Gofers repro buthamburg playfield.

By Buthamburg

6 years ago


Topic Heartbeat

Topic Stats

  • 63 posts
  • 27 Pinsiders participating
  • Latest reply 1 year ago by Buthamburg
  • Topic is favorited by 20 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

IMG_9468 (resized).JPG
IMG_9464 (resized).JPG
IMG_9463 (resized).JPG
IMG_9456 (resized).JPG
IMG_9453 (resized).JPG
IMG_9429 (resized).JPG
IMG_9426 (resized).JPG
IMG_9422 (resized).JPG
IMG_9421 (resized).JPG
IMG_9420 (resized).JPG
IMG_9416 (resized).JPG
IMG_9413 (resized).JPG
WD-Blau Violett No Good Gofers 2020 (resized).JPG
Wblau No Good Gofers 2020 (resized).JPG
WGelb No Good Gofers 2020 (resized).JPG
White No Good Gofers 2020 (resized).JPG

There are 63 posts in this topic. You are on page 2 of 2.
#51 1 year ago

Hello to all

While we are waiting for the negatives to get the silkscreens made, we eventually have some spare time to get
some our plastic parts finished. The first and second picture is showing the mounting of the light domes on the Prob Covers for STTNG.
Inbetween we are milling the last Terminator 2 Playfields, shown on the third picture. 5 Boards to go, then we will start with the Playfield Plastic Sets for Terminator 2. After the Probe Covers are finished, we started reviting the Road Show, Funhouse Cranks, A-19258, will still take some time, over 4500
Cranks, 9000 revits... Dont think that we will finish them today. The Cranks are shown on picture 4. While Leon is setting the revits, there is alot of time to get the new produced old Bally Bats packed 20-9592 shown on picture nr. 4
Sorry, a bit of topic.. But, tomorrow we are going to receive the new negatives for green and magenta, we discovered mistakes in magenta as well.
We will get the screens to the screen maker tomorrow, if all goes good, then we can continue printing NGG on Friday.

We will keep updating the printing of NGG
Have a nice day
Regards from Hamburg
Leon and Peter
www.buthamburg.de

IMG_9420 (resized).JPGIMG_9421 (resized).JPGIMG_9422 (resized).JPGIMG_9426 (resized).JPGIMG_9429 (resized).JPG
#52 1 year ago

Hello to all.
We will receive the screen this afternoon. Yeah..... This afternoon we will continue to print the No Good Gofers Playfields.
Say, did nobody notice a mistake in light blue?
We have discovered a quite big mistake in light blue.
Not serios, we have made a Negative and a screen to reprint
that area.
Here is a deal, the first to post the mistake , on Facebook, https://www.facebook.com/buthamburg.de/
in light blue will get a 10% discount on the No Good Gofers Playfield. The first right post will receive the discount.
We will start preperations now for the printing, Today we want to get the green done, heart beating, its a big area and quite a few color flowing dots. The green paint is mixed, green gets printed on to the yellow. The transparent green needs to be adjusted darker in ton, the yellow will shine through the transparent green and lighten it up. Same in other areas, the green gets printed ontop of dark blue, gives the darker green efect, and the same in the lettering, green on white, will give you the light green. Test print was good, color matched nicley.
Happy searching for the mistake in light blue
Regards from Hamburg
Leon and Peter

#53 1 year ago

Today we printed the red color. Green was not possible for
the screen motive is copied into the screen twisted. No Idea how that works, but the screen maker did it
Tomorrow we will print the brown and print the repair in light blue.
Did nobody see the mistake yet? Its 2 inches long.

Regards from Hamburg
Leon & Peter

IMG_9453 (resized).JPG
#54 1 year ago

Below the bottom left lightning? Hmmm...maybe a 10% discount will be enough to get me to purchase!

Do we get more than one guess......top of the wheel arrow??

#55 1 year ago

Good morning

Yes you have discovered the mistake that we saw. The arrow tip under the wheel has been mentioned before.
That was the first mistake discovered. You can also look on www.buthamburg.de If you find parts you need,
its 10 % for you until the same worth of a NGG Playfield.

We will now start repare printing the light blue. 3 different print areas.
If all goes well, we might still print the brown today

Regards from Hamburg
Leon and Peter

#56 1 year ago

Hey all
Toady we have printed the light blue repair print. Work out very nice. Tomorrow we will print the brown.
Now some time for a Beer
Have a nice evening
Regards from Hamburg
Leon and Peter

IMG_9456 (resized).JPG
#57 1 year ago

Yes you deserve a brew. Cheers!

#58 1 year ago

Hello to all

Today we printed the brown.
The green screen is back at the screen makers, we mostlikley get it tomorrow. All good things go by three.
Playfield is looking good, specially if you lay the black Film over it. Maybe we will take a picture with the black film over the print tomorrow while we are wait the screen?

Regards from Hamburg
Leon and Peter

IMG_9463 (resized).JPG
#59 1 year ago

Good evening.

Today we have started to print green.
The first boards look great.

Have a nice evening.

Regards from Hamburg.
Leon and Peter

IMG_9464 (resized).JPG
#60 1 year ago

Hello to All.
Today is beer time.
We proudly annouce that we have sucsessfully finished printing No Good Gofers.
Here is a picture of the original and Buthamburg Playfield.
Only today you can see what the last months of hard work turned out like.
We are very happy that the out come is quite perfect.
We wish all a nice day.
Regards from Hamburg.
Leon and Peter.
www.buthamburg.de

IMG_9468 (resized).JPG
#61 1 year ago

Great job! These will breath new life into a lot of NGG's with slam ramp damage. Perhaps along with the new playfields you could sell or recommend some felt pads for the bottom of the slam ramps?

#62 1 year ago
Quoted from Buthamburg:

Hello to All.
Today is beer time.
We proudly annouce that we have sucsessfully finished printing No Good Gofers.
Here is a picture of the original and Buthamburg Playfield.
Only today you can see what the last months of hard work turned out like.
We are very happy that the out come is quite perfect.
We wish all a nice day.
Regards from Hamburg.
Leon and Peter.
www.buthamburg.de[quoted image]

Gotta admit it turned out real nice!

You cut the shooter groove last before the clearcoat?

.

#63 1 year ago

Thank you

Yes, the milling is done after the first clear coat.

There are 63 posts in this topic. You are on page 2 of 2.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside