Hi all,
I am in the middle of a complete teardown/rebuild of a BDK. I've started to put the PF back together. Every so often I stop to test switches. I am early on in my build and I seem to not have any high voltage items working.
All of the leds are lit on the driver board. I am not an expert on Sterns so any help would be GREATLY appreciated. I know the coin door switch is working because when I open the door I get the "20V/50V disabled" message, which goes away when I press the switch in.

Thanks,
Dino

I am such a bonehead. I didn't hit select to test the device. I had been doing lamp tests all night (which don't require you to hit select) and I just forgot.
Funny thing on how I discovered it. I was doing switch test to test my pop bumper skirts. Well the coin door was closed and when I hit the pop bumper skirt OUCH.....my knuckle.
Duh...

Sorry,
Dino