Bought a No fear a couple years ago, started shopping it out and it turned into a PF swap and cab restoration. Been trying to get the kiddos involved so my boys did the decals on the cab, tuned out pretty good, there are a few small bubbles on the the rear side of one side.

I don’t know how long this will take but I’ve been working on it on and off since I’ve had it. I run routes and had a temporary employee I’d been trying to train up. He too had done a little work on this. With all this said, this is not a super high quality restoration, but more of a learning experience for those people in my life interested in pinball. It is not a garbage wagon by any means and it’s still a nice restoration. Unfortunately I have not done a very good job documenting, so pics will start off where I have them from.
3BCA886C-DD7E-41CC-96AB-306539551EF4 (resized).jpeg84F43D15-E9F2-481C-BC33-F1AA531A8685 (resized).jpegA44B01B2-92CB-48A8-B117-EAB07A4BA809 (resized).jpegB2A4D157-CD9F-462D-996B-2531F77D76DA (resized).jpeg

Found a NOS playfield cleared by Ron Kruzman. Needless to say, this is another project that’s a money pit and will have more in parts than the pin will be worth, let alone labor.

0A6A9FCF-FD92-45BC-9538-21FD5BD2AA6A (resized).jpeg

2ABF9B2F-15A5-48D3-8427-B2B0B45CD364 (resized).jpeg

Just put the PF on the rotisserie today and took a pic of the inner cab. This should bring me up to date.

286F347A-DA2B-4309-89FE-DF2D4CDC6E5D (resized).jpeg

B668AACC-B757-4FA7-914E-13549EDFB317 (resized).jpeg

EFA9F9B8-289F-477D-9D05-B5BBA4818ED7 (resized).jpeg

Well, I’m either going to sell/trade this or put it out on route.

Anybody else make toasted ham sandwiches with brown sugar peanut butter?

BC0737CE-4443-4E12-8B7C-485863E3A996 (resized).jpeg

CE2CF1B3-32D1-4C02-9655-6F930D254F9F (resized).jpeg

Today’s progress, ball guides, slings some posts and hex posts. Also cut, painted and installed new oak rails.

9464428B-755C-4B7A-8986-C314DDDB95A9 (resized).jpeg

7506DBDC-BFC7-41C1-BB62-2B400DA8C183 (resized).jpeg

Waiting for parts for No Fear. Installed a vent hood and built an enclosure, trying to add pinball to the kitchen but so far it’s a no go.

28C95F4F-7320-4DD0-9D2B-2D4839D690FC (resized).jpeg

8CEE6101-2A1A-44A6-9F01-DB406977A2CC (resized).jpeg

EBBEC6C1-6DD7-49EF-8AF1-DD644CBBFEDD (resized).jpeg

Yeah, I know, sorry. Life has been crazy with all this Covid-19 stuff. Can’t really explain it. My route has been shut down for 3 months, but I’ve been more busy now since the shut down. I’ve also been trying to get a fella schooled up on restorations for some time now and have been trying to cut him loose on this NF but I suppose he’s busy now too.

I’ll get to it soon as I get caught up with other things. I had to do some unexpected maintenance on my lift truck.

62063051-2356-4CF4-95C9-5357C96A0F22 (resized).jpeg

D16371C7-0472-4D0A-A456-B05A3D8CF9BB (resized).jpeg

63D91D4B-618E-4B9F-9F02-B52B4FF6F137 (resized).jpeg

A7A6AC90-2266-4909-BD88-97E144147D05 (resized).jpeg

Not sure, my buddy had them and I bought them from him.

Sold

I sold it as a project along with other project pins, parts and equipment as a package deal

Chris Royalty/hot rod arcade bought it.