(Topic ID: 122585)

No Fear Drop Target Error

By TunaSled

9 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

You're currently viewing posts by Pinsider johnwartjr.
Click here to go back to viewing the entire thread.

#11 9 years ago

What ROM are you running? There are some fixes in a few revisions of software - not sure if that's your problem or not... but it sounds familiar, so I'm wondering if that's the problem?

If you need an updated ROM, send me a PM and I can get you fixed up.

No Fear Pinball Software Revision Information

U6: Version 2.3
2.3 A Checksum: CC23
2.3 X Checksum: B023
Date: September 14, 1995

Changes from revision 2.2:

Improved the ball search logic to better compensate for a
broken switch at the right popper.

Changed the Skill Shot choice to start after the plunge,
not before. This keeps the choice from being available
until the ball actually arrives at the shooter.

Fixed a bug where choosing LOCK from the skill shot would
remove the 3rd lit lock if the player already had it lit.

Fixed score histogram labels.

U6: Version 2.2
2.2 A Checksum: A622
2.2 X Checksum: 8122
Date: September 14, 1995

Changes from revision 2.0:

Fixed a bug where the state of the errors for the optos
being stuck and the drop target being flakey were not
being cleared at factory reset, so the user could get
erroneous errors randomly, based on the state of the CMOS
RAM before the reset.

Fixed a bug in the user-error report where line 2 of
of the error message was not being cleared properly.
This would cause messages such as "check drop target,
not set" instead of just having "check drop target"

U6: Version 2.0
2.0 A Checksum: C520
2.0 X Checksum: 9F20
Date: June 8, 1995

Changes from revision 1.1:

The game now checks the ramp magnet optos to see if any are stuck
closed at initialization. If so, they are considered to be
disabled until the next powerup (or test mode) that sees them
un-stuck.

Added user report messages for stuck and disabled magnet optos.

Changed broken switch logic on drop target to make sure
that it does not try to change the position of the drop
target unnecessarily; thus allowing the player to get
to the shot behind it more easily. This then allows
locks to be lit much easier when the drop target is broken.

Added logic to watch the drop target for 15 games to make sure
that is is lighting locks. Gives a message if 15 games go by
without a lock.

Corrected the updating of the buy-in button lamp to make sure it
is updated whenever credits are added. Before, it would not start
blinking until the player had put in MORE than the required credits
for buying in.

Allowed the buy-in button to enter initials during the high score
to date entry screen.

U6: Version 1.1
1.1 A Checksum: 0311
1.1 X Checksum: DD11
Date: May 15, 1995

Changes from revision 1.0:

Added French translations.

Changed the default adjustment for Raceway Start to AUTO.

Change the default Raceway Holdover Difficulty to HARD.

Changed the auto-percentage of Raceways to start with 2 lit
instead of 3 by default.

Implemented the "dice match" feature. Added an adjustment
to use the old match display.

Fixed a glitch in the multiball start display.

U6: Version 1.0
1.0 A Checksum: 1B10
1.0 X Checksum: FB10
Date: May 3, 1995

This is the release of software for production.

This version works with sound revision 1.0:

U2: Checksum: 6B00
U3: Checksum: 6700
U4: Checksum: D000
U5: Checksum: 2700
U6: Checksum: B200
U7: Checksum: C700

Changes from revision 0.8:

Added German translations.

Fixed a bug in the drop target updater which would allow
the drop target to stay in the "wrong" state if it was
told to change while it was already busy trying to change.

Changed track feature to allow laps during the grace
period of nascar - the most obvious result of this is that
the nascar lamps will be properly updated at the end of
NASCAR mode.

Drop target now only makes a sound effect when it is dropped
by the player.

Added adjustment ofr attract mode sounds and speech.

Added broken switch logic for right ramp, underground lockup,
right/left loop switches and right return lane.

Trough test now makes sure the drop target is down at the
beginning of the test.

Added two score fonts to the system to accomodate a 10 billion
single player score and a 10 billion multi-player "player up" score.

Increased flipper Skill Shot to 50 million.

Fixed "match" text to fit on screen.

Added a bunch of lamp, display and sound effects.

Ball search is now held off during video mode.

Fixed up the auto-plunger to correctly check game over conditions.

U6: Version 0.8
0.8 A Checksum: 8208
0.8 X Checksum: 6708
Date: April 17, 1995

This is the release of software for production of sample games.

Promoted items from Pinside Marketplace and Pinside Shops!
$ 15.00
Cabinet - Sound/Speakers
Gweem's Mods
 
$ 63.95
Eproms
Pinballrom
 
$ 95.00
Cabinet - Sound/Speakers
Pinball Mod Co.
 
$ 15.95
Playfield - Toys/Add-ons
ULEKstore
 
$ 5.00
Playfield - Protection
UpKick Pinball
 
$ 79.00
Lighting - Under Cabinet
Arcade Upkeep
 
$ 125.00
Boards
Pinball Haus
 
From: $ 15.00
Cabinet - Other
NO GOUGE PINBALL™
 
From: $ 27.00
Boards
KAHR.US Circuits
 
$ 23.95
Lighting - Led
Mitchell Lighting
 
$ 10.00
Cabinet - Other
Filament Printing
 
$ 19.95
Lighting - Led
Mitchell Lighting
 
$ 11.95
Playfield - Toys/Add-ons
ULEKstore
 
4,800
Machine - For Sale
Livonia, MI
$ 199.95
Electronics
PinSound
 
$ 22.50
Electronics
bdash's bits
 
$ 35.00
Cabinet - Other
Rocket City Pinball
 
$ 9.95
Eproms
Pinballrom
 
4,800
Machine - For Sale
La Porte, TX
From: $ 17.99
Eproms
Matt's Basement Arcade
 
$ 59.99
Playfields
NO GOUGE PINBALL™
 
11,500
Machine - For Sale
Cumming, GA
$ 329.99
Lighting - Other
Lighted Pinball Mods
 

You're currently viewing posts by Pinsider johnwartjr.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/no-fear-drop-target-error?tu=johnwartjr and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.