Is there a ROM update on this Classic?
You're currently viewing posts by Pinsider Gorgar666.
Click here to go back to viewing the entire thread.
Quoted from arcyallen:Something odd happened recently. I after not playing my No Fear for a few months, I turned it on and played. I didn't like it. It was VERY odd, as it's always been a Top 5 game for me. But over the last month I've played dozens of games and somehow have rapidly fallen out of love with it. Maybe it's my newly acquired Metallica and WCS, or maybe it's just me. But I'm officially out of the club.
Anyone else ever have this happen with a game?
Quoted from Micky:It is a Williams WPC Security (WPC-S)
What power tap is this similar too? Website opinions are wpc and wpc 95 only.
Quoted from KevInBuffalo:Oh, and the guy I got the game from didn't have the backbox key and didn't know where it was. Close call on pulling these out of the back box.
[quoted image]
Quoted from o-din:BK2K is a sharp looking game with great music and is fast. However, it is mostly right flippers only all day long and gets more repetitious faster.
Thanks for your insight, games have come and gone. No Fear is always left standing...
Quoted from GeekedOnPinball:Added this car for the same driver on the backglass.
[quoted image][quoted image]
Wow, where you get it? Post a link.
Quoted from GeekedOnPinball:What other mods have people done?
[quoted image]
Man, that is too clean.
Quoted from misterhare:You could always buy the machine and track down an old board and sell the RD board later.
Depending on cost. A good deal is a good deal.
F1A5E955-9BB9-4B0B-8878-CC06760BA88F (resized).jpegQuoted from transprtr4u:Any other No Fear owners have Pre drilled mini post holes in their playfield? My first one didn't have it and this one does ?
[quoted image][quoted image]
What tha....
Quoted from Brazy:Got mine s couple weeks back... launches balls on start up and won't give you multiball... unless random reward... had a friend look at it and opto on VUK is bad. Part getting ordered.. anyone else have this issue?
Is it updated?
Quoted from Pbpins:Going through parts today for games that I no longer own and found this, it is orginal NOS WMS. If anyone needs this, PM me.
[quoted image]
Mines together with zip ties..lol...
Quoted from mollyspub:A friend from overseas. I'd have to check with him to see if he's willing to do more
What Material is it made out of?
Quoted from transprtr4u:Not cheating when the game is set up that way , I will always use the "start challenge "
I 2nd that.
Quoted from transprtr4u:Added More Fear to No Fear
[quoted image]
WTF? Where did you get that?
Quoted from transprtr4u:Found the image had my decal girl make the decal, good friend cut the acrylic. Still to come is a flasher for the back to tie into Bonehead on the playfield.
Could have been a touch smaller but it doesn't offend me !
Sweet.
Quoted from PhillyArcade:So I'm thinking this winter I'd like to replace the art work on my badly faded No Fear. Who has the best out there? I was thinking on going with these...
https://pinballdecals.eu/shop/no-fear-pinball-cabinet-decals-set/?currency=USD
Alternative out of the question?
Quoted from PhillyArcade:Are those the new ones by micro that are super shiny?
https://www.retrorefurbs.com/shop/no-fear-alternate-pinball-cabinet-decals/
Quoted from mollyspub:Swapped in a LCD DMD [quoted image]
Wow. Anyway I can see in action. Cant decide on LED or LCD. How does the white look in the snow videos?
Quoted from mollyspub:The white and everything else looks amazing ! Maybe I can try and shoot a video.
Ok thanks 2816392149 . Maybe easier. I’m waiting on a check, then I’m ordering one. How hard to install? Does it come preloaded with No Fear?
Quoted from transprtr4u:The Colordmd for No Fear is amazing! Really the best mod for any pin ... reds - red ,whites- white ect.
Buy with confidence
WooHoo!!
Quoted from misterhare:No need! Product video is here:
Saw that. That isXLarge dots. I wanna see this...is this blocks? Zoom in...
C55E27FE-EFCB-4571-8EB7-C6E1ABF493B2 (resized).jpegQuoted from mollyspub:No led dots here ! Anything specially your looking to see?
Action st
Quoted from mollyspub:No led dots here ! Anything specially your looking to see?
Something other than the Williams logo.
Quoted from Fieldsweeper:I was thinking of buying this game. Recently went to look at one. Anything I should look for on this machine? Is there anything odd about this one or anything that is prone to break more than others etc?
How does this game play? Is it fun fast or slow? I only got like 2 games on it but seemed like a relatively cool theme. The one I was looking at was ok priced I think.
Anyone know good price ranges for different conditions?
Cabinet fade is worse of all WPC’s Jump ramp cracked up.. skull working properly...This is badly faded..
44ADF8C1-8ABA-409D-B03A-14BF1B81C5BE (resized).jpegQuoted from mollyspub:Haven't figured it out but here's a pic of it together. [quoted image]
Quoted from mollyspub:Haven't figured it out but here's a pic of it together. [quoted image]
You need the lit speaker panel. $150
Quoted from o-din:I play No Fear when I've had enough of Rick And Morty kicking my ass.
Hahaha, Play better!
Quoted from mollyspub:Did you go with LCD or LED?
I've thought about the speaker panel but haven't looked much into it. Haven't seen anyone post pics of it either. I have a few other custom touches though in the works!
LCD, I’ve seen someone here with The
basic LED Speaker Panel. Looks Badass...
Quoted from OpSteel:Picked up the speaker panel and lighted hinges at the last TPF in 2019. They look great with the ColorDMD.
[quoted image][quoted image]
You got the deluxe model.... $230...with speaker LED...
No Skull on the speaker grils?
Quoted from mollyspub:Having a issue with air balls off the drop target. Any advice ?
Does the DT Drop after the hot?
Quoted from mollyspub:After hitting the drop. Sometimes it even flys above and past the flippers! Talk about a SDTM !
How your 6.5 pitch level. Sounds like too much flipper power. Greater pitch will slow down the ball.
Quoted from transprtr4u:Never ... my goes directly into the loop
From what I understand, It should. Mine goes halfway up the ramp. Then back down. Usually right back to the left outlane....I’m ordering a stronger coil...
Quoted from transprtr4u:What's the best way to maximize points in video mode?
When I'm jumping tend to miss lots of points, any tips or tricks?
You can turn In mid air....
Quoted from PhillyArcade:I hear RadCals will make art work for No Fear next year! Can't wait for that. My faded NF will look new again. Anyone ever use them on anything else?
Translite art?
Quoted from JTHALL16:I got this idea after looking at a Scared Stiff machine recently. It took some custom painting but it think they came out amazing. Pretty sure Skull would agree “Obviously you have No Fear!”
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Any details on the painting?
Quoted from Alan_L:Greetings!
Just joined the club and my decals are pretty faded.
Has anyone purchased a new decal set from Classic Arcades? How did they look? I'm trying to find out if Rad Cals are available yet. Anyone know?
Thanks,
Alan
I wonder if they sale only one side of the cabinet. Everything else is great....
Welcome.
Quoted from PoMC:Joining the club again after a 6 year hiatus. Looking back on my posts in this thread has been a blast from the past. Do a search for my name and you'll see the mods I tried out - some good, some bad, but all fun - and some lineup changes from back then.
A No Fear popped up for sale about 2 hours from me and luckily I was scrolling thru FB right after it was posted.
I now know to install an LED OCD board when installing LEDs in the inserts.
Welcome Back.
Quoted from Stevie-D:Hey all, new to the group and the game. What a blast. I just put one back together that was in rough shape. I think it turned out fantastic. I helped Cliff Rinear make new ramp end flaps, as mine were rusty. So new ramp end flaps are available from Cliffy‘s, as well as his normal kit that is a must have. Check them out. http://www.passionforpinball.com/
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Them Plastic forms are icy clear. Are they new? Are you on the No Fear Facebook fan page? Too clean bro...
Quoted from djreddog:You need the Kahr board.
i also have the Khr Reset Fix board installed. Not one reset since I installed it.
Quoted from yzfguy:Nope, and I never would. They ripped off the product shamelessly from the original Kahr board. I have Kahr boards in several games.
My bad. I also have the Kahr in No Fear. I need a couple more for Shadow and Johnny Mnemonic. They don’t do Ad’s here on Pinside do they?
Quoted from smcclain65:Joined the club last thursday, having a blast and had a few billion plus games. I ordered a Colo DMD and was wondering what were the must have mods.
1. Die cast valvoline car looks pretty standard, Can someone show me pics of how they attached?
2. Motocross rider, same as above can someone show pics and which model/toy?
3. Upgraded speakers and pinsound. Has anyone done this and have a gameplay video?
Thank you all.
I have a Pinsound Neo Plus that I installed then removed/W Headphone Jack accessory. $250+ shipping. Gonna post it for sale soon.
Quoted from yzfguy:Mirror blades look great, I'm sure better than in pics.
[quoted image][quoted image]
Looks amazing Brother!
Quoted from Seven9er:I was "fortunate" enough to pick up a player's condition No Fear last week. It's my first ever pin and I have next to no knowledge of diagnosing and fixing issues. I'm having issues with the upper flipper. When I start a game the flipper is completely dead, then will start to twitch, then flip but not hold, and then finally fully flip "normal" albeit with a noticeable delay when the flipper button is pushed. Anyone have suggestions as to where/what I should take a closer look at?
Congratulations. Perfect Pin to start with. Lots of information on WPC-S. Lesson 1, buy the Manual of you don’t already have it. Your system is WPC-S.
Quoted from Sarge:You don't want to paint one ZILLION flames by hand?
In the process of doing a cab now, seeing flames in my sleep. Almost makes me wish I would have bought decals...
ALMOST!
Let’s see.
Quoted from GRUMPY:This era of games didn't control coil power. The elimination of the pink connector will stop the loss of coil power.
Good to know. I see No Fear has multiple pink connectors and not Soldered .I think my flipper coils are also connectors.
Quoted from mollyspub:I’m pretty sure the early code had this concern. Update to the latest and you’ll be fine.
yep
Quoted from HighProtein:I'm proud of my routed as hell NO FEARs on location!
Both are currently in laundromats.
They both could use a bit of an overhaul and will get it one by one.
I vividly remember the deals to get them, one was in Orlando and one in Gainsville.
Are they Chained down? I remember as a kid in the 80's. Every grocery store had at least one by the exit doors.
Quoted from topkat:If anyone needs a subway ramp please let me know.
I ordered an extra from pinball resource in Germany.
They look to be original ,so unused but not new plastic
Got a link to that sight?
Quoted from topkat:https://www.pinball.center/en/shop/pinball-parts-by-game/no-fear/9304/subway-ramp-for-no-fear-03-9335-3
That was it. I had to use a German mailbox , then get them sent here. Not looking to make $ just cover close to half since got 2.
Dont need the subway, let me know if you ever make another order.
Quoted from cws204:How do you calibrate the kickback to consistently make the side racetrack? Mine does it 1 / 10 times, it is so great to see it make the track on the seldom times it successfully does.
I messed with this for weeks….I looked over many Video. Believe it or not. It wasn’t originally designed too…
Quoted from Gorgar666:I messed with this for weeks….I looked over many Video. Believe it or not. It wasn’t originally designed too…
Also cut off quick connectors on all coils and solder directly…
Quoted from Gorgar666:Also cut off quick connectors on all coils and solder directly…
More power….
Quoted from GregCon:I made new hex posts for my No Fear out of 316 stainless steel. These are the original dimensions along with a few small changes I made if anyone is interested in this to help ID what goes where.
[quoted image]
Wow. Nice.
Quoted from dddanielll:You can adjust the angle the ball kicks out via a screw to the right in one of the habi rails through one of the plastics. I also had to figure out the sweet spot of the outlane post, has to be tightened down just right and will often move over the course of many games played if not tightened.
Make sure that the kick back coil is actually soldered and not press connected. I believe there was a yellow electric type crimp fit on many No Fears. Loss of power IMO. The left ball guide will adjust the path of the launch. I’m 50/50 into the loop.
Quoted from yzfguy:I like clear better, the skull looks weird in orange to me.
I sorta agree.
Quoted from DK:Listed for $5,750 OBO on Marketplace.
Thanks!
Was the cab completely restored/done? Or decal slap good.
Quoted from Gorgar666:Was the cab completely restored/done? Or decal slap good.
inside and out?
You're currently viewing posts by Pinsider Gorgar666.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/no-fear-club-play-better?tu=Gorgar666 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.