Thanks a lot I'll order one!
Good thing you still have the bracket, because that may not be as easy to come by. I found the assembly itself was no longer in stock. Did not look for the bracket by itself though.
Need more help, what size coil is supposed to be in ball launch (shooter lane) on this one it's a 26-1200 and it's not even close to making it in the hole (behind drop) or have you guys a size to recommend that's consistent making that shot. No manual and my internet is super slow. Thanks again.
Quoted from lostlumberjacks:Need more help, what size coil is supposed to be in ball launch (shooter lane) on this one it's a 26-1200 and it's not even close to making it in the hole (behind drop) or have you guys a size to recommend that's consistent making that shot. No manual and my internet is super slow. Thanks again.
AE-23-800 is the correct coil. You also want to make sure no one has removed the plastic disc on the right flipper button and repositioned the switch or it can interfere with the shooter.
Quoted from OpSteel:$4 plus $15 for shipping
$9.95 shipping from Marco no matter how much you buy is what I usually pay.
I found a equivalent. Works great now. I think they charged me 7 on the gate, ordered 2 just in case. Fun fast game.
I've got a problem with my jump ramp not scoring, hit the ball up the left ramp and it won't score for missions or for when u make the jump. I take the glass of and everything is okay in switch tests. Then I start a game a touch with my fingers and I can make it score the ramp and jumps. I adjusted the switches so they do hit when the ball hits the wire. But when I put the glass back on and start a game I get nothing? Today I thought I was good because I worked for a game but then now it's non scoring agian on the next. Gimme a direction
Quoted from Skooiker:Gimme a direction
Is there a pink crimp terminal on the switch? Yes, cut it off and solder wire directly to the switch.
Quoted from GRUMPY:Is there a pink crimp terminal on the switch? Yes, cut it off and solder wire directly to the switch.
I will check in the morning, just thinking it's a lose connection then?
Quoted from Skooiker:just thinking it's a lose connection then?
Not so much as a loose connection, but more like a high resistance connection. If you wiggle the connector around, then it will work for a day or two.
Quoted from GRUMPY:Not so much as a loose connection, but more like a high resistance connection. If you wiggle the connector around, then it will work for a day or two.
Cool I will definitely take a look and see if that's the issue
Quoted from GRUMPY:Not so much as a loose connection, but more like a high resistance connection. If you wiggle the connector around, then it will work for a day or two.
So the switch was already soldered on but I looked old and so I resoldered it and set it up as sensitive as I could get it, worked with the glass off everytime, even worked for a game and then not. Lol dumb thing
Quoted from yzfguy:Well, this is not the liveliest group! I went with mirror blades and love them on this game. I also put starpost leds in which look cool. Neither photograph very well. The star posts light up a nice deep red, but wash out in the pics.
[quoted image][quoted image][quoted image][quoted image]
Like the post lights. I went with mirrors on mine also and it really enhances the look. Agree the colordmd is awesome on this title. Love this game but I've been in the club for a long time. Was trying to trade, but seems like folks only wanna buy. Got a nice one with mirrors, titans, colorlcd, premium non ghosting leds, with some normal cabinet fade in the reds. Plays great. Suggestions on pricing in these crazy times as I'm really not sure.
20210205_145609 (resized).jpg20210205_145625 (resized).jpg20210205_150135 (resized).jpg20210205_151636 (resized).jpg20210205_152022 (resized).jpg20210205_153301 (resized).jpgQuoted from tp:Like the post lights. I went with mirrors on mine also and it really enhances the look. Agree the colordmd is awesome on this title. Love this game but I've been in the club for a long time. Was trying to trade, but seems like folks only wanna buy. Got a nice one with mirrors, titans, colorlcd, premium non ghosting leds, with some normal cabinet fade in the reds. Plays great. Suggestions on pricing in these crazy times as I'm really not sure.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Nothing lower than 4K
Quoted from Nickadee912:In da club !
[quoted image]
Welcome! Got a pic that shows that topper?
I got this idea after looking at a Scared Stiff machine recently. It took some custom painting but it think they came out amazing. Pretty sure Skull would agree “Obviously you have No Fear!”
0D445092-C5E8-4CEB-B097-D81178C01624 (resized).jpeg3097152A-9F96-4590-AE6E-A4FDADC5E1B0 (resized).jpeg36833262-02CA-444D-AB05-E10F6F2E0BD0 (resized).jpeg6828B5D7-821D-4DE0-8BC8-05A6D322B5EA (resized).jpeg877CF64B-EE13-4B32-91B6-298A96AA89F4 (resized).jpeg9E112229-6707-4BA5-BDE0-0434FE40F378 (resized).jpegF27DB266-5056-433A-B6AD-5A3D5282442C (resized).jpegDid some work on #NF tonight. Powder coated rails, legs, lockbar and hinges as well as installed PDI glass and mirror blades.
20210224_221940 (resized).jpg
20210224_221951 (resized).jpg
20210224_222020 (resized).jpg
20210224_222007 (resized).jpg
Quoted from mikespins:Did some work on #NF tonight. Powder coated rails, legs, lockbar and hinges as well as installed PDI glass and mirror blades.
Normally not a big fan of mods/non stock but this looks pretty cool, nice job!
Quoted from byurick:Normally not a big fan of mods/non stock but this looks pretty cool, nice job!
Thanks!
Quoted from JTHALL16:I got this idea after looking at a Scared Stiff machine recently. It took some custom painting but it think they came out amazing. Pretty sure Skull would agree “Obviously you have No Fear!”
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Any details on the painting?
Quoted from Gorgar666:How to keep this ramp down? Slight lifting..
Right flap? Looks kinda long
Quoted from transprtr4u:Right flap? Looks kinda long
Normal length, mine covers the top of that arrow graphic also.
Quoted from Gorgar666:How to keep this ramp down? Slight lifting.
Is the lower left corner touching the base of the post?
Quoted from Gorgar666:Any details on the painting?
Nothing super special, I received the raw plastic bone color flippers from Marcos, wiped them down with rubbing alcohol and proceeded to paint with a medium size model paint brush. I painted them with three coats of Rust-oleum gloss white, oil based, protective Enamel letting them throughly dry between coats (overnight). They came out rock solid. I have no worries about them chipping or flaking paint off.
85B5566F-D628-4D6C-BE66-F538093439C1 (resized).jpegQuoted from john17a:can anyone point me in the direction of where i can get a full set of no fear plastics
thank you
Hahahaha! From what I understand these haven't been available in sometime now.
Marco has them listed but out of stock.
Quoted from john17a:can anyone point me in the direction of where i can get a full set of no fear plastics
thank you
I stand corrected. PPS now has a complete set in stock!
I will have a few plastics going up for sale soon for those that don't need a complete set. This will include the commonly broken skydive plastic.
Just joined the club tonight! Anyone know where I can get the sticker for the spinner? Just noticed mine is missing
Quoted from bowtech:Just joined the club tonight! Anyone know where I can get the sticker for the spinner? Just noticed mine is missing
Welcome to the club, who needs pop bumpers?!
Shoot me your address. I have new spinner decals that came with my flipper topper decals. You're welcome to them.
Quoted from yzfguy:Welcome to the club, who needs pop bumpers?!
Shoot me your address. I have new spinner decals that came with my flipper topper decals. You're welcome to them.
Awesome! Pm sent.
Can anyone tell me what line and where they got it from led lighting they added to the back of the playing field? I can see it in some of the topic pictures but not sure what it is. That back is dark and makes it hard to see the jump ramps if the room lighting is dimmed.
Quoted from bowtech:Can anyone tell me what line and where they got it from led lighting they added to the back of the playing field? I can see it in some of the topic pictures but not sure what it is. That back is dark and makes it hard to see the jump ramps if the room lighting is dimmed.
Man this is one of the first things I noticed
When I picked up this game!
I added a comet matrix led strip that ties into the GI with the supplied connection. Pm for more details.
This is one of the very very few games I have owned twice because I missed it so I'm back in the club. For some reason this low bom game has much more excitement than the average kind of like black knight swords of rage I can't really explain it.
Is it possible to get the "no fear" launch button to light up when not being played but turned on? My "rock me" button is lit on my Flintstones but I can't seem to find a setting for it.
Does anyone have an issue with their NF where the small flat metal piece above the magnets on the back ramp comes up a little bit? This happened when I first got the machine and I took that piece off and reglued it, but it's happening again, causing the ball to get caught up. I used hot glue last time, may use polyurethane (gorilla) this time.
Well the value of my almost complete set of plastics just plummeted Came with everything but the skydive plastic, the one I needed.
Will have to get this on order before they go out of stock again.
Quoted from OpSteel:Well the value of my almost complete set of plastics just plummeted Came with everything but the skydive plastic, the one I needed.
Will have to get this on order before they go out of stock again.
Where can you just get one plastic ?
Quoted from mollyspub:Where can you just get one plastic ?
Looks like PPS has the full plastic set in stock. They also have a few singles but not the skydive plastic.
Quoted from mikespins:Does anyone have an issue with their NF where the small flat metal piece above the magnets on the back ramp comes up a little bit? This happened when I first got the machine and I took that piece off and reglued it, but it's happening again, causing the ball to get caught up. I used hot glue last time, may use polyurethane (gorilla) this time.
What metal piece are you talking about? A picture might help.
Quoted from Micky:What metal piece are you talking about? A picture might help.
This
Mine was loose and just took the ramp off and cleaned the metal shield. Then I used an epoxy to reattach under the the ramp.
Looks like yours is on the top?
I have not seen that part before on any of the No Fear pinball machines I have looked at. Mine definitely didn't come with it, and I finished a complete strip down and rebuild from the ground up only last year. The brand new ramps I fitted on mine didn't have that part on it either.
Personally I wouldn't bother trying to fit it back on.
Quoted from transprtr4u:Mine was loose and just took the ramp off and cleaned the metal shield. Then I used an epoxy to reattach under the the ramp.
Looks like yours is on the top?
So you attached it between magnet and ramp? Have any pics?
Quoted from Micky:I have not seen that part before on any of the No Fear pinball machines I have looked at. Mine definitely didn't come with it, and I finished a complete strip down and rebuild from the ground up only last year. The brand new ramps I fitted on mine didn't have that part on it either.
Personally I wouldn't bother trying to fit it back on.
Interesting, thanks. Can you send me a Pic of that spot on yours?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/no-fear-club-play-better/page/15 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.