In the process of installing the new ramp set in my No Fear, and evidentially didn't take enough pictures before starting

Can anyone help identify the location for the 2in 1/4 hex standoff? It has 8/32 threads on one side and is flat on the other. Thank you!

Screen Shot 2021-01-30 at 9.32.08 AM (resized).png

Screen Shot 2021-02-01 at 2.00.14 PM (resized).png

Thanks Karetaker but that's a 3.5in 5/16 hex standoff. It also has threads on both sides.

The one I'm trying to find a location for is flat on one side (no hole or threads).

Screen Shot 2021-02-01 at 3.03.46 PM (resized).png

I found the location in the following restoration thread:
https://pinside.com/pinball/forum/topic/no-fear-shop-out-turned-pf-swap#post-5596240

It looks like I never removed it for the ramp swap, or it was somewhere else. There was a machine screw where it should go. Now once installed it hits the ball on the wire ramp. I guess I'll be bending the ramp or sticking with the machine screw.

PXL_20210201_203534765 (resized).jpg

Screen Shot 2021-02-01 at 3.38.44 PM (resized).png