(Topic ID: 6877)

No change lane and can't introduce initials [SOLVED]

By delcotron

12 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

IMG_0282.jpg
IMG_0280.jpg
IMG_0290.jpg
IMG_0288.jpg

You're currently viewing posts by Pinsider dirtrider.
Click here to go back to viewing the entire thread.

#7 12 years ago

I had the same problem on my T2. I fixed it, after a while.

http://pinside.com/pinball/forum/topic/no-lane-change-on-t2

The board was a dash 3, (-3) and needed to be a -1. I added U7, U8, R210, R211, changing it to the proper board configuration for a T2.

WPC Dot Matrix
WPC-89 CPU board.
A-12738 sound board

Slugfest Baseball, 6/91
Gilligan's Island, 7/91
Terminator2, 7/91
Hurricane, 2/92
Party Zone, 10/91 *
Hot Shots (Basketball game)

Gilligan's and T2 are both pre-fliptronic games and need the components I listed.

#9 12 years ago

Looks like a solder blob down by that cap. I'd try to melt it out using a solder sucker. You can't do an accurate check of a diode in circuit. De-solder one side and check it. Trace the wires back from the flipper switches to your power board and see if the level changes when you push the button. From there you can trace the signal back through the components. Sorry if this is too simplistic, I don't know your electronic skill level.

#16 12 years ago

Excellent, glad to hear a fix was found. Mine took a few days.

Promoted items from the Pinside Marketplace
From: $ 110.00
Playfield - Other
Arcade Upkeep
Other
5,100 (OBO)
Machine - For Sale
Louisville, KY
$ 12.00
Tools
Nezzy's Pinball Prints
Tools
$ 44.99
Cabinet - Shooter Rods
Pinball Shark
Shooter rods
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods

You're currently viewing posts by Pinsider dirtrider.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/no-change-lane-and-cant-introduce-initials?tu=dirtrider and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.