Hi All,
finally the Nine Ball playfields are ready and available. They are 799 USD shipped to the USA or Canada, Australia is extra 80 USD shipping.
We have also the complete plastic set out of UNBREAKABLE material! The plastic set alone is 19 USD, the combo with the playfield is 899 USD shipped to the USA or Canada, Australia is extra 80 USD shipping.
Please contact me for any questions!
Regards,
Mirco

2020-12-08 10.21.00 (resized).jpg

2020-12-08 10.21.04 (resized).jpg

2020-12-09 11.05.07 (resized).jpg

2020-12-09 11.05.10 (resized).jpg

2020-12-09 11.05.12 (resized).jpg

2020-12-09 11.05.15 (resized).jpg

2020-12-09 11.05.21 (resized).jpg

2020-12-09 11.05.26 (resized).jpg

2020-12-09 11.05.28 (resized).jpg

2020-12-09 11.05.29 (resized).jpg

Thanks a lot for showing the issues in the art, this was the best I could get out of the master i had, but it is easy to fix as i have only printed very few so far and they can be reprinted easily.

I would really appreciate if you can get me scans or pics of the error areas and i will fix the art within the next days and print the corrected versions. I do not need vector art so we can safe that work.

Are there any bugs in the plastics?

Thanks a lot for your help!

Regards,
Mirco

The inserts mentioned are all same as original in transparent not opaque. Might look a little different on the pics as our tip coat is slightly milky, same as on old wms games.

I dont neccesarily need scans, pics from approx. 90 degree angle above the area would be ok as well.

Thanks for your help!

Regards,
Mirco

As the print file does not use any vectors at all - this is simply WRONG.

Regards,
Mirco

Thanks a lot for the list, this really helps me! The master I had was touched up in these areas and it was not clearly visible on the pics I found. Only question I have left is - can you email me the scan of the middle ball? The better the details are the better the result would be.

I have some great scans from cottonm4, thanks a lot for them!

We have to work on some other projects right now but I will try to get into the art during this week...

More playfields are prepared to print another test but I have no time on the printer except on the weekend. So let's get the file completed till Friday and we can get it done!

Regards,
Mirco

Can you post a pic of it? Not sure if I got it right... the master I have has this cutout I did...

Regards,
Mirco

Please see the corrected version attached. This is not yet printed, only preview so colors are off.

The L and 0 areas are fixed as well... Any other areas we missed so far?

Regards,
Mirco

korrektur für pinside (resized).png

We are printing nineball today and will have pics of the final version end of the week. I expect then to ship early or mid next week.

Thanks a lot for the help with the files!

Regards,
Mirco

Because the image is fixed and this will be the final version. All found errors are fixed so no need to go back and forth hundred times. These errors only happened as the original I had was touched up at these areas.

Regards,
Mirco

I do but I have to use production slots if I have them. Right now all machines are running all time and once all components are ready for that machine it has to go into that slot.

I use the exact same color mix on the printer for the plastics and the playfield. But due to the digital print, yes the color might look weaker than a screen print. Unlit plastics and playfield have the exact same color.

I could possibly print two layers of cmyk before white is printed but that would change the color unlit into darker versions.

This is the limit of digital print... screen is simply too expensive and that why not worth the effort in that small batches.

Regards,
Mirco

Hi Mac, thx, I will give it a try as soon as I have some room on the printer...

Regards,
Mirco