I have a loose orange wire near the 2 coins 3 plays relay. Trying to figure out where it goes.
I don’t have an NR but found this and thought it might be useful. I hope it helps.
https://www.ipdb.org/files/1677/Bally_Night_Rider_Schematic.pdf
Quoted from CRWgxp:I have a loose orange wire near the 2 coins 3 plays relay. Trying to figure out where it goes.
How about posting a picture of the area?
Please be aware with Bally EMs, there are wires that are not used in the main harness. Each of my Bally EMs has at least two unused wires and they all terminate around the coin credit selection jumpers and coin relays. There was a thread about this somewhere before.
If you do or do not have the two coin step unit or 3rd coin relay, wire may or may not been connected.
Quoted from Skidave:Does it go here? That was soldered to something before. I will need to see the schematic to be sure.[quoted image]
Schematic here
https://www.ipdb.org/files/1677/Bally_Night_Rider_Schematic.pdf
https://www.ipdb.org/files/1677/Bally_1976_Night_Rider_Manual.pdf
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/night-rider-picture-needed?hl=mopar and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.