The Simpsons Pinball Party
Stern, 2003We may be back in business. I talked to nibbles and together we might be able to produce these again. It's a rough prototype 3d printed can with a paper sticker. I am inquiring about getting some professional vinyl stickers made. As you can see light can still go through it.
I have acquired the lead on the vinyl decal. I need an interest level to pursue further prototyping.
Sounds great. Let's get the word out and I will start cranking these out. Out-west you get the first and free one for responding. I need at 20 to start.
I've been looking for this mod for a while now. Thanks for making this happen! Put me on the list, please!
There should a good amount of people looking to get one, I haven't made these in over a year and still get people today asking if I have any left. Really interested to see the vinyl sticker when it's done! And dammit, I need a 3D printer, wayyyy to muh fun with all the stuff you can make.
I working on a reasonable cost of course and yes the foam will light up. I believe more light will come through the top because it is completely hollow on the top.
Very cool mod that fits the theme/look perfectly. I hope you guys can start to roll some more out seems like there are pinheads that want em.
The can is to scale now and it lets light through. Had to put it on my JM that has a red flasher. I will get pics on my buddies TSPP. Yes it will have foam, the coaster and the decal will be a fine detailed vinyl decal. The decal will look like the original better than the paper reproduction I did for testing purposes.
Quoted from retired_user_101:i'm interested in 1.
any way to get the foam on top & side like the original mod?
cheers,
bb
Yes. Yes I will be doing the foam
Quoted from Pin_-_K:I'm in too - but I'd like to see the Beer Foam lit up.
Pin - K
...and can we run a straw through it, drill hole in playfield glass for straw, then connect through can into a cooled pony keg in the lower cab. that way between balls, we can lean over and get a drink through the straw. 
Quoted from retired_user_101:...and can we run a straw through it, drill hole in playfield glass for straw, then connect through can into a cooled pony keg in the lower cab. that way between balls, we can lean over and get a drink through the straw.
Great idea
Quoted from retired_user_101:...and can we run a straw through it, drill hole in playfield glass for straw, then connect through can into a cooled pony keg in the lower cab. that way between balls, we can lean over and get a drink through the straw.
Than I guess you'd be "Lit Up" instead of the Beer's foam - TFF !?!
Are you trying to tell me people here drink Beer & play Pinball!?!?!
looks like a lot of responses. i would like two of them please (i have a friend who would like one that is not on the forums often)
christopher
Update:
1. Beercan model sent to graphic designer to finalize decal.
2. Foam testing to begin this weekend to reproduce original look.
3. Will start a new thread directing interested parties to the mod shop, after points 1 and 2 are complete.
4. Need to determine if the coaster is worth the extra time. Will set up a poll on the new thread. Since this will delay shipment, I might also offer it as an add on.
Quoted from gac:Count me in when they are available
I believe they are available:
http://www.etsy.com/listing/165699583/tspp-duff-beer-can-mod-with-or-without?ref=related-6
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-tspp-duff-beer-mod/page/4 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Albuquerque, NM
Melbourne
Regina, SK
