Put me down for a blue as well.

Its the cream colored box on the 2 orange spacers they are normaly used for home security systems looks like a radio shack one.

Yeah not to disrespect anyone but I would lust want a plain ramp preferably with the slot cut for the switch there is too much chance of someone being unsatisfied switch clearance might be off etc.

Being blue its already a mad part i for one rather do my own switch installation since blue i would add decal and the switch would be in the way most likely.
I want a blue ramp but same time i dont want to see the bulbs under it so i would have to do other mods. realy changing out a switch is simple its kind of a waste of the ops time to do the extra labor and have to find/make new parts having a new ramp is the most valuable service that can be provided atm.

El wire is too dim it looks kinda crappy if you use leds in the machine also elk wore dosnt have a reliable life span to risk ruining a nice new ramp over.
You can buy set lengths of el-wire it can be cut and spliced but its a bit tedious, the transformers are unreliable over time and can cause EMF interference on the machine LV electronics if the field is absorbed by surrounding wire esp the switch matrix.

Well thats 2 destroyed in shipping and you notice they are both plug and play ramps i think its the switch causing them to break becouse its prolly to tight in the box and that area has no room for give in that box so the weak point that takes the damage is the switch area of the ramp.
Seemingly mine and the other basic ramps all made it to the persons safe

Im with Robert SOF realy needs new ramps as well they are all broken.