Desert Hills, AZ
Available on the website: starship-fantasy.com
Twilight Zone subway small
Earthshaker subway
No Fear catcher ramp
More to come.
(Topic ID: 235318)
Linked Games
Earthshaker
Williams, 1989-
Jokerz!
Williams, 1988
-
No Fear: Dangerous Sports
Williams, 1995
-
Party Zone
Bally, 1991
-
Twilight Zone
Bally, 1993
Topic Gallery
Great to see new ramps being made.
Any chance we might see some of the older ones restocked, specifically Space Shuttle ?
Honestly, Space Shuttle will probably be one of the last I do. The thicker plastic on that one has created a huge problem. It will be difficult to hand form a ramp off the tool and then redo the tool to make the thicker ramp work. My plan is to do all the HIPS products first.
Quoted from lrosent345:Available on the website: starship-fantasy.com
Twilight Zone subway small
Earthshaker subway
No Fear catcher ramp
More to come.
Can you post a picture of the TZ subway?
Is it the one that feeds the gumball machine?
1 week later
The flaps for WCS are in the mail. The only thing missing is the decals.
1 week later
Quoted from fossmin:Is there any chance of Fire! buildings ever being remade?
Pinball wizard has the fire center building on their website. Just an FYI
I'll be working on NBA right ramp, then PartyZone, then Radical.
I have over 200 original Williams tools. I am using those first because it saves both time and money and lowers the cost of the ramps. I may never get to any non Williams games. I have 2 tools for Radical that I have not looked at yet. One of the tools has 2 parts on it.
Quoted from lrosent345:I'll be working on NBA right ramp, then PartyZone, then Radical.
Awesome! I'm looking forward to have a fully working NBA Fastbreak again.
2 months later
I had every intention of being at Pinfest this weekend. It's been one of those weeks over which you have no control. A week before I planned on leaving I got a cold. But continued to get worse and I finally went to the Dr. cause I figured I had Pneumonia. Get some antibiotics and hit the road right? Wrong? The virus had not caused pneumonia but instead decided to attack my heart. So here I am On Sat instead of being in Allentown still in the hospital. They have also found kidney stones. My heart rate refuses to stabilize so I'm not going home any time soon. Hopefully home soon. During this time we may have to go to next day shipping instead of same day shipping. I know I have all of your support Thanks. I have only 4 hours of work to put the cap on WCS but I'm having a hell of a time getting to that 4 hours.
Melbourne
Quoted from lrosent345:I had every intention of being at Pinfest this weekend. It's been one of those weeks over which you have no control. A week before I planned on leaving I got a cold. But continued to get worse and I finally went to the Dr. cause I figured I had Pneumonia. Get some antibiotics and hit the road right? Wrong? The virus had not caused pneumonia but instead decided to attack my heart. So here I am On Sat instead of being in Allentown still in the hospital. They have also found kidney stones. My heart rate refuses to stabilize so I'm not going home any time soon. Hopefully home soon. During this time we may have to go to next day shipping instead of same day shipping. I know I have all of your support Thanks. I have only 4 hours of work to put the cap on WCS but I'm having a hell of a time getting to that 4 hours.
Geez! as an owner of a number of your fantastic ramps, I can only send best wishes for a speedy recovery.
Quoted from fossmin:Is there any chance of Fire! buildings ever being remade?
man, it would be nice to have somebody make these, but I don't see it happening on larrys watch. too many to/do's now.
Quoted from lrosent345:I had every intention of being at Pinfest this weekend. It's been one of those weeks over which you have no control. A week before I planned on leaving I got a cold. But continued to get worse and I finally went to the Dr. cause I figured I had Pneumonia. Get some antibiotics and hit the road right? Wrong? The virus had not caused pneumonia but instead decided to attack my heart. So here I am On Sat instead of being in Allentown still in the hospital. They have also found kidney stones. My heart rate refuses to stabilize so I'm not going home any time soon. Hopefully home soon. During this time we may have to go to next day shipping instead of same day shipping. I know I have all of your support Thanks. I have only 4 hours of work to put the cap on WCS but I'm having a hell of a time getting to that 4 hours.
Larry! Hope you get and feel better soon.
Ramps can wait, rest and get healthy.
Thank you for all you do for our hobby.
Quoted from Muskie82:TMNT? Who has the original tools for the data east games?
Probably Stern
Quoted from Muskie82:TMNT? Who has the original tools for the data east games?
I dont think any of the data east molds were saved.
To my knowledge, none of the DE, Stern, Sega molds were kept or stored. Someday perhaps they may still be found. Until then pretty much the only hope you have is Marc and me. In the future, I hope to devote more of my time to new products but have done a pretty bad job so far.
Quoted from lrosent345:I'll be working on NBA right ramp, then PartyZone, then Radical.
Party Zone! Thank you sir! Also, hope you are feeling better soon!
just be glad they found the kidney stones before the kidney stones found you. ughhhhhh that's some wicked shit.
Wow. Lucky you weren't as stubborn as so many of us are when it comes to our health. It could have been a lot worse if you just powered on through and didn't see a doctor. Hope you can fully recover quickly!
1 month later
I'm answering several questions asked on Freeplay40's post. The ramps that have been made since I took over the business are Cyclone Ferris Wheel, Earthshaker subway, Twilight Zone subway, World Cup soccer, whirlwind lift, and bad cats. In addition, hardware has been added to over 30 ramps to ensure all riveted parts are supplied with the ramp. Most of the chromed parts we have been out of for years will be rolling out over the next month. Whitewater mountains are actually done but they have to be hand painted. The demand for the WCS ramps has been huge and they are time-consuming to prep. We're not going to be able to paint the mountains for a week or 2. Will let everyone know as the parts become available.
Quoted from lrosent345:I'm answering several questions asked on Freeplay40's post. The ramps that have been made since I took over the business are Cyclone Ferris Wheel, Earthshaker subway, Twilight Zone subway, World Cup soccer, whirlwind lift, and bad cats. In addition, hardware has been added to over 30 ramps to ensure all riveted parts are supplied with the ramp. Most of the chromed parts we have been out of for years will be rolling out over the next month. Whitewater mountains are actually done but they have to be hand painted. The demand for the WCS ramps has been huge and they are time-consuming to prep. We're not going to be able to paint the mountains for a week or 2. Will let everyone know as the parts become available.
Thank you for your enormous contributions to this hobby!
Quoted from lrosent345:I'm answering several questions asked on Freeplay40's post. The ramps that have been made since I took over the business are Cyclone Ferris Wheel, Earthshaker subway, Twilight Zone subway, World Cup soccer, whirlwind lift, and bad cats. In addition, hardware has been added to over 30 ramps to ensure all riveted parts are supplied with the ramp. Most of the chromed parts we have been out of for years will be rolling out over the next month. Whitewater mountains are actually done but they have to be hand painted. The demand for the WCS ramps has been huge and they are time-consuming to prep. We're not going to be able to paint the mountains for a week or 2. Will let everyone know as the parts become available.
Any chance we might see a cyclone skill shot ramp one day? I see all the other ramps have been remade, except that one.
4 weeks later
Lrosent345, restoration in my WCS with your ramps. Could not have done it without! Thank you 
Restoration was done by Pinsider Perry Dilbeck. Great work.
1C8A73A8-742E-4D50-8355-FC397C859B91 (resized).jpeg3FC0B769-960C-4818-96EA-19E33031CC03 (resized).jpeg48040DD3-7C12-4F83-9ECF-687C1B7077B5 (resized).jpegC7614798-3FA3-48B9-8655-428173C23D43 (resized).jpeg5BF29597-385D-49BA-A546-FB557F65BAAF (resized).jpeg61863427-2378-49B5-BDCF-4CC09A734DFD (resized).jpegF958E007-9FBF-453E-BF9B-5D696770B3D6 (resized).jpegReply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
