Quoted from goingincirclez:Customized and installed my clear shuttle ramp... what a transformative part! Thanks for making these, Larry!
[quoted image]
[quoted image]
[quoted image]
Very Nice Machine !!
I'll be starting the ramps for Party Zone this weekend. The process can take 1 to 6 months depending on how things go and how quickly I can get the ancillary parts done.
Yes. Order black from the website and send an email to larry@starship-fantasy to let me know you want clear,
Quoted from lrosent345:I'll be starting the ramps for Party Zone this weekend. The process can take 1 to 6 months depending on how things go and how quickly I can get the ancillary parts done.
NICE!
Quoted from lrosent345:I'll be starting the ramps for Party Zone this weekend. The process can take 1 to 6 months depending on how things go and how quickly I can get the ancillary parts done.
Awesome!
Quoted from lrosent345:I'll be working on NBA right ramp, then PartyZone, then Radical.
did the NBAFB right ramp make any progress ?
Saw your post in Jody's thread.
A lot of pin heads just don't get the work that goes into these ramps.
Jody, Marc and you provide an amazing service.
Years ago when I meet you at pin a go go I was blown away by your booth. In short, it started my restoration madness and I have you to thank for it first hand.
Thank you for your time and hard work.
And your dog was a sweet little thing to.
I've been looking for the big Hurricane ramp for 4 years. No worries, i do know it may never be done and Im ok with that. Its about cost and demand. Even if you made 25, it would still take a year or 2 to sell them. This is why I haven't posted 10 times asking for it, I know its not a feasible ramp to make.
Thanks again.
Years ago when I meet you at pin a go go I was blown away by your booth.
Agree, Larry's booth is a thing of beauty! You get a much better idea of how many ramps he offers when you see them all spread out. Thanks Larry (and all the other ramp/parts makers)!
Here's the real problem with Hurricane. Even if I cut the tool up, you can see from the picture that the size of the PETG sheet I would need to use is almost the same as making all three. This basically means I can make all three ramps for almost the same cost as all three. People will overwhelmingly want the large ramp cause the others have been made. So I either sell all three ramps as a set and people are pissed cause they only need the large ramp or I sell the large ramp for $20 less than the set and then people are pissed cause they think I gouging them. I went through this with Police Force and it was not fun. Yes, most people understand when I explain the reason to them but it causes a tremendous waste of my time because I am overwhelmed with complaints.
Better option is to wait for Freeplay40 to get his larger oven.
Made my first purchase of Starship Fantasy ramps this week for my WCS that I'm refurbing. Ordered the complete set with new decals and they arrived today. All I can say is: WOW!! The quality of these are absolutely fantastic, best I've seen from ANY manufacturer I've purchased from since 1998, be it OEM or 3rd party! Real great looking ramps, can't wait to complete the refurb and mount these on....Big thanks to Starship Fantasy!
Quoted from lrosent345:Thanks for your comments. Is there any interest in the Gorilla, upper left, for Congo?
Larry you might want to postin this forum also.
https://pinside.com/pinball/forum/topic/congo-club-owners-only
Quoted from lrosent345:Thanks for your comments. Is there any interest in the Gorilla, upper left, for Congo?
I’d take a new gorilla
Quoted from bluespin:Larry you might want to postin this forum also.
https://pinside.com/pinball/forum/topic/congo-club-owners-only
Thanks for the heads up.
Quoted from lrosent345:I'll be starting the ramps for Party Zone this weekend. The process can take 1 to 6 months depending on how things go and how quickly I can get the ancillary parts done.
How much will they cost?
I am so excited for Party Zone. I have been waiting 3 years for new ramps. Still hoping for clear purple or red or something
Quoted from lrosent345:After Party Zone. Freeplay 40 is going to do Radical.
party zone jumping the queue ! dang
Quoted from lrosent345:Here's the real problem with Hurricane. Even if I cut the tool up, you can see from the picture that the size of the PETG sheet I would need to use is almost the same as making all three. This basically means I can make all three ramps for almost the same cost as all three. People will overwhelmingly want the large ramp cause the others have been made. So I either sell all three ramps as a set and people are pissed cause they only need the large ramp or I sell the large ramp for $20 less than the set and then people are pissed cause they think I gouging them. I went through this with Police Force and it was not fun. Yes, most people understand when I explain the reason to them but it causes a tremendous waste of my time because I am overwhelmed with complaints.
Better option is to wait for Freeplay40 to get his larger oven.
Just a suggestion but maybe price the 3 ramps separately and don't sell them as a set. Then ignore the complaints, complaints go with the territory.
Quoted from NYP:Just a suggestion but maybe price the 3 ramps separately and don't sell them as a set. Then ignore the complaints, complaints go with the territory.
I think he is saying that the cost of materials is about the same regardless if he did the one big ramp or all 3. I don't think he could just sell the one ramp cheap out of a set and then get stuck with the other ramps that have less demand.
I would sell both the main ramp and the set. Put a note on the one ramp that it's expensive to make by itself and better deal to get all three ramps.
Quoted from jawjaw:I think he is saying that the cost of materials is about the same regardless if he did the one big ramp or all 3. I don't think he could just sell the one ramp cheap out of a set and then get stuck with the other ramps that have less demand.
I would sell both the main ramp and the set. Put a note on the one ramp that it's expensive to make by itself and better deal to get all three ramps.
I agree. I think there are going to be certain ramps that are low production and don't sell as much as a high production game, so price them higher. If people need them they have to pay more, if not, no ramp, complaints go to the deleted folder......
Quoted from lrosent345:Thanks for your comments. Is there any interest in the Gorilla, upper left, for Congo?
yes!
and a volcano!
I don't price my ramps according to what people are willing to pay but rather on my cost. Addams Family for example would be well over $200 if priced according to what people would pay.
Quoted from Kenz:The ramps on PZ are a work of art. Mine are in very good condition. I would still buy a spare set though.
I check ebay often and in 3 years only one crappy set have shown up. I love this game but it does NOT get the love that other games get. Parts are impossible to find.
Quoted from lrosent345:Here's the real problem with Hurricane. Even if I cut the tool up, you can see from the picture that the size of the PETG sheet I would need to use is almost the same as making all three. This basically means I can make all three ramps for almost the same cost as all three. People will overwhelmingly want the large ramp cause the others have been made. So I either sell all three ramps as a set and people are pissed cause they only need the large ramp or I sell the large ramp for $20 less than the set and then people are pissed cause they think I gouging them. I went through this with Police Force and it was not fun. Yes, most people understand when I explain the reason to them but it causes a tremendous waste of my time because I am overwhelmed with complaints.
Better option is to wait for Freeplay40 to get his larger oven.
I would suggest just vacuum form the whole thing and sell it raw. Have the buyers
cut out what they want and finish it them selves.
Our Bad Cats ramps came in today. They look excellent.....big thanks for providing replacement ramps. My wife loves this pin Now we are needing a playfield. I have had one on order from CPR for almost a year....still have hope they make more of them.
Quoted from lrosent345:After a long dry spell, the Whitewater ice mountains are available again at:
starship-fantasy.com.[quoted image]
Those look awesome
Quoted from lrosent345:After a long dry spell, the Whitewater ice mountains are available again at:
starship-fantasy.com.[quoted image]
Darn you....making order.
Thanks Larry!!
We've been fortunate to be able to stay open and continue to ship orders as well as supply sneeze guards for Costco and Fry's. As you might have guessed, there is now a countrywide shortage of Acryllic and PETg. I'm hoping to have enough left until I get my next order.
Quoted from lrosent345:As you might have guessed, there is now a countrywide shortage of Acryllic and PETg.
So far my supplier has not offered up the PETG for sneeze guards. Worst so far for me has been to wait a couple extra days to get it cut.
Hi there,
any chance for Indy 500 left ramp?
That one is almost always damaged.
And Indy 500 is such a great game.
Quoted from Pindrew:Hi there,
any chance for Indy 500 left ramp?
That one is almost always damaged.
And Indy 500 is such a great game.
I would buy one also!
Quoted from Pindrew:Hi there,
any chance for Indy 500 left ramp?
That one is almost always damaged.
And Indy 500 is such a great game.
Try posting in Freeplay40 ramp forum. He should be almost done with his larger setup that’ll accommodate larger ramps like this.
We've hit a brick wall on Party Zone. After waiting 2 months we received our PETG order only to find that it is too thick to use. I have never had a manufacturer send plastic thicker than I ordered until now. We have more on order now but it is a 4 week wait, Hopefully during these 4 weeks the decal will be done and we'll be ready to go.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-ramps-by-starship-fantasy/page/8 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.