Desert Hills, AZ
The left ramp is a pain in the ass. I found the best way to do it is lift the playfield slightly to get a good angle through the opening where the wires go from the playfield to the back box.
(Topic ID: 235318)
Linked Games
Earthshaker
Williams, 1989-
Jokerz!
Williams, 1988
-
No Fear: Dangerous Sports
Williams, 1995
-
Party Zone
Bally, 1991
-
Twilight Zone
Bally, 1993
Topic Gallery
Got an order coming in shortly for a Cyclone set..he's very excited to dump his originals (two of which are..bad) after I told him how much I love my clear SS ramp!
Quoted from lrosent345:The left ramp is a pain in the ass. I found the best way to do it is lift the playfield slightly to get a good angle through the opening where the wires go from the playfield to the back box.
That's what I did. And my hands are giant and awkward and they barely fit into those two slots in the back. Even lowering the backbox to get back there. But that has nothing to do with the quality of the ramps I hope other people have an easier time. But I only lost a couple of screws in the process from dropping them. I can't speak highly enough about how great they are. So far I haven't had any issues of ball jumps on the right ramp when it pops out. I hope it's because the ramps are thicker and don't allow as much bounce. Sometimes the ball would bounce off about 75% down the ramp, but there were no breaks or anything.
Because I have gorilla hands it's easy to break things, I was worried while bending the left ramp up to get the bracing post on there, but there was no cracking of plastic or anything. Luckily I had the little black screw tabs in the back. I know it's not your responsibility but I don't know if you can even get new ones and send them with the new ramps.
Would there be any chance of DE Back to the Future somewhere down the line? These things are near impossible to find and everyone I talk to says they would pickup a fresh one in a heartbeat. Amazing work!
Pinsider PjM made these 1-2 years ago. Check with him.
Quoted from bluespin:Pinsider pjm made these 1-2 years ago. Check with him.
Don't bother
2 weeks later
Budapest
NBA right is next then I'll consider Corvette
bassplayer67
Message #1 of 32021-02-11 07:51
Larry any Chance of a pinbot topper being made?
lrosent345
Message #2 of 311:37
Funny you should ask now. About a month ago Bay Area Amusements and I started working on whether or not this is possible since getting red PETG is not an option. We should have samples shortly to evaluate the finished product.
When rearranging the warehouse, I found about 12 red coffin covers for Monster Bash. It is unclear if I will ever run them again. I have placed them on the website if anyone wants one.
Quoted from lrosent345:When rearranging the warehouse, I found about 12 red coffin covers for Monster Bash. It is unclear if I will ever run them again. I have placed them on the website if anyone wants one.
Ordered!
Umeå
1 week later
Eatons Hill
There are 2 things I need. The NBA hoops ramp metal bracket protecting the outhole. I need to borrow it but would prefer to buy it if possible.
Next, I need a Cyclone game to test fit my Ferris Wheel Exit ramp. Preferably one in the Phoenix Valley but if I don't find one here, I would be willing to ship it to someone to test fit themselves.
Quoted from lrosent345:There are 2 things I need. The NBA hoops ramp metal bracket protecting the outhole. I need to borrow it but would prefer to buy it if possible.
Next, I need a Cyclone game to test fit my Ferris Wheel Exit ramp. Preferably one in the Phoenix Valley but if I don't fin
Hi. You talking about the right ramp? I can send mine to you. Thank you.
Quoted from lrosent345:There are 2 things I need. The NBA hoops ramp metal bracket protecting the outhole. I need to borrow it but would prefer to buy it if possible.
Next, I need a Cyclone game to test fit my Ferris Wheel Exit ramp. Preferably one in the Phoenix Valley but if I don't find one here, I would be willing to ship it to someone to test fit themselves.
Hi I misread it before. I can borrow you the hoops bracket if you want it. ? thank you
Quoted from lrosent345:left ramp off the Ferris wheel.
Did you have to redo that for some reason? The one I purchased from you at York works great and is a perfect fit.
I started work on NBA Fastbreak right ramp this weekend. It is going to be a lot more trouble than I anticipated. It is going to be difficult to form and the number of riveted parts and decals is gonna drive the cost up. Doable but it's gonna be slow. It's tough to replace too due to the harnesses that run along the ramp.
Quoted from lrosent345:I started work on NBA Fastbreak right ramp this weekend. It is going to be a lot more trouble than I anticipated. It is going to be difficult to form and the number of riveted parts and decals is gonna drive the cost up. Doable but it's gonna be slow. It's tough to replace too due to the harnesses that run along the ramp.
Make sure I’m in the waiting list please. Thanks for
2 weeks later
Quoted from lrosent345:I did. I made a male tool instead of yours that was done on a female tool.
Going to do a cyclone tear down soon and I will need this ramp, shall I assume the mold doesn't really matter to the end user?
It matters a little. With a male tool, the ramp is thicker in places the ball hits and much thicker at the bottom of the ramp. I can also make it with thicker plastic and not worry about changing the flow of the ball.
1 week later
I checked with my metal bender and he is not going to be able to run the parts for the NBA right ramp for a month. I'll bet it is more like 6 weeks. The decals were ordered a couple of weeks ago. The first ramp should be here in 2 weeks so I can start the test process. I'll let you know as we get closer.
lrosent345 I have this game for a long time whit a bad ramp so 6 more weeks seems like nothing. Thank you !!!
2 weeks later
OK. Here is your teaser. First off NBA right ramp. Still need ancillary parts on order and decals also on order. Need the ancillary parts before I can test fit.
IMG_1520[1] (resized).JPGQuoted from lrosent345:OK. Here is your teaser. First off NBA right ramp. Still need ancillary parts on order and decals also on order. Need the ancillary parts before I can test fit.
[quoted image]
It's getting closer!
Quoted from lrosent345:OK. Here is your teaser. First off NBA right ramp. Still need ancillary parts on order and decals also on order. Need the ancillary parts before I can test fit
Still waiting for it. No rush. I think I have other pins to play !!! Thank you.
Quoted from lrosent345:OK. Here is your teaser. First off NBA right ramp. Still need ancillary parts on order and decals also on order. Need the ancillary parts before I can test fit.
[quoted image]
Nice, stronger than original do you think ?
Quoted from lrosent345:Much stronger
j hope you can bring that ramp to Allentown.
1 week later
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
