GITD with purple flippers on Monster Bash!
E71DF91D-D844-47E2-B2FC-5E1B84F0A95C (resized).jpeg

No pictures yet, but I installed glow in the dark Titans on my Night Moves with pink caps for the plastics. It looks really nice, but I feel like I need more lighting to go with the UV bulbs. I can tell they're doing the job as far as activating the glow on the bands, but (and I knew this before buying them) they don't do much for GI purposes. I guess the best thing to do is select a few choice areas to go back to the 2 SMD sunlight LED's and find the best mix between activating the glow and lighting the playfield. Beyond that, I like the play I get from the Titan rings.

I also did a kit in black on my Cheetah. It really picked up the speed when the ball goes into the pop bumpers!

I'm not sure the best way to do Night Moves, but here are a few pictures. One side has 2 SMD white in the inlane, the other has a UV bulb. I play with a bit of light on in the room, so I can see the ball either way. I think the glow in the dark effect shows well in the photos. I also included a photo of Cheetah with black Titan rings.

IMG_0409 (resized).jpg

IMG_0412 (resized).JPEG

IMG_0417 (resized).JPEG

IMG_0418 (resized).JPEG

I'm loving this thread. Can't wait to upload my own pictures after I figure out which pin I'll give the treatment to..

That's easy, all of them.

Standards? or Low Bounce?

I put GITD Standards on a Stranger Things and it bounced all over the place. Hoping the GITD low bounces I'm about to order will be better...

Low bounce always, IMO. Significant difference in feel and playability, and I have them on all 8 of my flippers (3 pins).

Just got done my SBM with kit I created. Game would look 10 times better if the center decal I had installed didn’t have to be removed because it looked like total crap.

I’d rather look at the wear. Now to install the better backglass. Luckily I had a nice one hanging on my wall.

EA81F7FD-95E3-4542-A11F-067E1791EBD9 (resized).jpeg6F456CE5-C075-4CDD-BC7B-A3ED2E70ECF2 (resized).jpeg64F3389A-FB2D-4765-932D-C4332D0B54CB (resized).jpeg

this is probably not common at all, but I am working on a bally kiss, and no one sells the colored "rubber" rings in 5" for the middle/left on the game (needs 2). so if you ever have the chance to make 5", there is at least one game, that would look good with black, orange or red.

High Speed has 5" rings as well, way in the back in the middle of the outer loop. Would love to swap the old rubber with Titans!

UV for inlane, hands down. That game's a mood.

Glowy.

2A5B0AB3-1ACF-4736-A237-14042F513F61.jpeg

Put it in a laser tag place! Or even better, use Tron.

Lots of beautiful game pics here. Just want to say. It has been said before. If your Titan rubber feels a little tight or you are stretching it. It will only break in a month or so. Regular rubbers do too. These are by far the best.

I haven’t had the super bands break like the titans. Specially on slings, titans just blow out it seems.

I love my titans. All 21 games are running them.

Just got my Titan's today and installed them on my Memory Lane the machine is definately faster and more fun ....thanks Titan will be buying more for my other machines

IMG_2171 (resized).JPG

IMG_2173 (resized).JPG

IMG_2174 (resized).JPG

Looks great!

Thanks ....this machine has seen some time on the playfield (players machine). but the titan's made it look and play better

Anyone got any coupon codes? Haha

The only Titan sale I'm aware of is during cyber Monday. I think you might could also save on shipping if you order them in advance of a pinball show like TPF where they can bring them for you to pickup in person. Even so, their products are already priced quite fairly, IMO (not sure what shipping to Canada is).

titan10 used to work until recently.. maybe expired for the new year

Try "buffalo." It used to be the coupon code for Buffalo Pinball, but I don't know if it still works.

Any chance to add Capcom rubber part numbers to your reference list? I was ordering a bunch for a guy in my neighborhood for his Breakshot and figured out the conversion to the other types.

Flipper Rubber RB00115-BK
1" Mini Flipper Rubber RB00114-BK
7/8" Post RB00105
7/16 OD RB00117-02
3/16 ID RB00108-01
3/8 ID RB00108-03
7/16 ID RB00108-04
1 1/4 ID RB00108-07
1 1/2 ID RB00108-08
2 ID RB00108-09
2 3/4 ID RB00108-11

Anyone put titans on their Stern Godzilla? I'd love to see some photos

Several have built kits: https://www.titanpinball.com/kits/index.php/browse/bygame/5762

When I finally get my GZ Premium they will be going in day 1. Translucent w/green flippers…not sure if I’ll go low bounce or regular probably order both and try them out.

Titans rock!

I highly recommend the low bounce. I've had both on my pins and the thinner/low bounce flipper rings give you noticeably more control IMO. Also, they are still extremely durable and long-lasting.

https://www.titanpinball.com/kits/index.php/view/id/1922

I put some photos up with Titans in my LE. I agree with Mr_Tantrum to go low bounce on the flipper rubbers. I really like the translucent rings with the GZ theme.

Is Titan going to have rings for sale at TPF? I need to pick up a set for my Rush LE.

Question for Titan.

I’ve changed my preference over several years to the thinner flipper rings. I’ve got quite a few of the older ones that I haven’t used. Do you have an opinion about certain games that are better paired with the original vs thinner flipper rings ?

I have had bad luck with, balls recently. I seem get stuck with junk. These are the balls I bought from Titan, brand new out of package. Cleaned the 3 times with alcohol. This is as shiny as they get.

A8BD4F72-00A6-4E3B-BD7F-5FA8B8FAA12D (resized).jpeg

Are they the standard shiny ones? Look fine to me.

They are there best shiny ones. Ya gonna have to use them. They are no Ball Baron. I actually have gotten a lot better off EBay.

I only get their standard shiny balls as those never magnetize. They are all I’ll ever need.

Here is a White Water I just finished. Yup, I did it in white. Changed all the clear posts to blue along with the flipper bats. Posts are all dark blue. Customer wanted clear or blue and I went rogue. He was stunned when he saw the pictures.

20220601_175349 (resized).jpg

20220601_175412 (resized).jpg

That thing is badass ..nice job

While I was at work today, I was trying to put an order together and after about a half hour of no use ( had to do work stuff), my cart was erased. I figured the first time I must have cleared it by accident. It happened 2 more times and I finally gave up. Not sure if its my computer or the system, but it would be nice to keep items in the cart for awhile.

FWIW, I created a standard Gottlieb Volcano kit at Titan. White rings and red flippers, with a white shooter tip, same as sold in most standard Volcano rubber kits.

https://www.titanpinball.com/kits/index.php/view/id/3060

Any idea when the BLACK flipper ring standard rubbers are going to be in stock again?