Has anyone formally asked them to enable the switches or have an option for them in the pro code. There is probably an if stmt someplace that compiles them out of the code for the pro

#ifndef METPRO
//stuff to turn on the spinner switches
//stuff to turn on cross
//stuff to turn on hammer
#endif

I know im over simplifying it... But it may not be that hard to at least to have an option for them.

Rick

ordered my set today. Saw in another thread that Timebandit was working on a mod to get them tied into his TLS and that put me over the top.

Not officially. I think hooked has it tied into the pic targets, but timebandits total light show mod board sounds like it will soon allow the spinners to cause the pinball to play an audio sound.

Here are some pics of my install from last weekend.

20170114_222442 (resized).jpg

20170114_205158 (resized).jpg

20170122_182406 (resized).jpg

20170122_182411 (resized).jpg

20170122_182424 (resized).jpg

I used blue painters tape and made pencil marks on the tape of where to cut when i did Metallica. Then used a scroll saw to cut them out.

i just used a scroll saw. take your time and go slow.