OP

Quoted from pinstadium:

Here are the flashers options for BM66. The GI location I recommend is one of the bulbs in the upper lanes.
Also you cannot hook up to switches as they are on a matrix and will strobe like crazy. A good thing to do that helps is go go into Settings/Diag/Lamps/Flasher and cycle through then visually so that you know where to hook them up. I hope this helps.
[quoted image][quoted image]

OP

Quoted from pinstadium:

Good idea! The flasher information I obtain from the Internet Pinball Database https://www.ipdb.org/search.pl
for older machines and have linked to that in the instructions too.
Also Stern/JJP/CGC/American Pinball/Spooky have the manuals posted on their website. There is always a Lamps/Flasher section in each of those as shown above which is very helpful.
As I progress through machines I do try to update them here when possible.
I now have a Pin Stadium machine install database that is live for availability to update recommended locations and this also allow customers and myself upload and document what they decided were the best recommended locations.
I will continue to work to update that and also provide another link here along with putting the link in the instructions section too. It would be awesome if anyone reading this could help and make an entry for the machines they have done since I have been extremely busy over here.
https://pinstadium.com/installation-instructions-search/
[quoted image]

OP

Quoted from pinstadium:

I have updated the install instructions on the website regarding this:
Very Important reminder if your Pin Stadium pinball mods kit comes with one the new Konekt adapters for the UV+Glow Stern shaker motor trigger, then here is how to connect it.
Make sure the red wire from the factory matches up with the Konekt adapter like this.
Note: This particular adapter comes with the kit if that is the recommend location to trigger the UV+Glow from
[quoted image]