OP

Quoted from pinstadium:

This is the first I have heard of this but I know what you are seeing. The Power Bladez and Pin Stadiums are not connected and run as independent units.
What you are seeing is when the Pin Stadiums are off during certain modes because of the GI module properly syncing them, the Power Bladez are still running their constant pattern in those brief moments (since they do not sync with the G.I.) and the lights from them are lighting up the LED housings on the Pin Stadiums making it look like they are on.
It is not a Pin Stadium issue but there are two fixes for this. One would be to re-wire your Power Bladez to trigger off of the GI or you can get Invisible-Shields for the Pin Stadiums (if you don’t have them already) to help shield that light a bit.
The first option is the best solution though. I hope this helps and makes sense.

OP

Quoted from pinstadium:

It looks to be the UV LED housing picking up the lights from the Power Bladez. It makes them look like it is on for those brief moments. The LED lens and housing is sensitive and is picking up that light causing that effect. That is why when you move them it goes away. Shoot me an email to [email protected] and I will put you in touch with a good customer that has them on his AC/DC too or you can messaged him here: bmegar

OP

Quoted from pinstadium:

Here are the recommended settings for IMDN Fusion or Orion’s Belt:
Flasher# Description
1. Left spinner Green
2. Left lighting bolt White
3. Sarcophagus lock Red
4. Right lighting bolt Blue
I spent some time really setting this up for the best result for you guys installing these. It’s a very impressive combination for all of the modes. Then it really shines during Sarcophagus lock, Mummy multiball, and Fear of the Dark. Wow!!

OP

Quoted from pinstadium:

Yes Flasher 165 is correct (not 170) and that hasn’t changed. Sorry if that was confusing in any way. Here is the color coding and positions. Yellow represents white.
[quoted image]