Fusion orders from over the weekend are shipping out toady and will be on there way. Just letting everyone know as it seems like this weekend was Fusion Fest or something as a lot of orders came in even more than normal. Tracking information will be send to your emails shortly if you have not received them already.

fusion_ripper (resized).png

It rarely occurs, but I have seen this happen before in a few instances and one time it happened to me even. This is due to a "freshly" printed art blade with a certain amount of die/color (just a rare combo) and they are out-gassing which breaks down the adhesive. So the easy fix is for you to email me and I will send another set of Magna-Mounts to you as you will need them due to the fact that once the bond breaks it will not re-adhere properly.

When you install the new ones, be sure wipe it with rubbing alcohol again and let the mount sit for 48 hours before mounting the light bars. Be sure to squeeze it firmly with your fingers from the outside and inside of the cabinet when mounting this one. This will allow it to fully cure thus negating the out-gassing from the new art blade. Most art blades are not fresh and sit around for a little while, and when they do they go through this outgas process but you happen to get some really fresh ones. The Sterns have likely been stored for a bit. I hope this makes sense and email me with any questions along with your order number/name. I will get you taken care of.

If that occurred after that time then the fix is to clean and put a new set of Magna-Mounts on and apply "extra" pressure then sit for 48 hours to be sure it's done. But yes, "Hover" will be the ultimate solution in many ways.

By the way, HUGE stream "On Tap" tonight with Zach from FlipNout Pinball and live hosts Ken/Bill from Special When Lit with Josh Kugler of American Pinball (he will be there playing and answering questions) streaming new code on Oktoberfest WITH Pin Stadiums!!

You have go to see the results on Oktoberfest. It is now even more "Special When Lit" woohoo!!!!

https://www.twitch.tv/flipnoutpinball

oktoberfest_stream (resized).png

Last night was an awesome stream and definitely worth checking out!!

Josh covered all the bases and the Pin Stadiums really brought Oktoberfest to life: https://www.twitch.tv/videos/424978567

twitch_bg_pinball_led_lights (resized).png Start following us on Twitch we will be hosting the most popular streams and will be streaming "Live" the Pin Stadium products so you can see them in action along with some exclusive giveaways. "Seeing is believing" with our products as you all know.

Follow us by tapping the heart icon from here on the top right of the screen: https://www.twitch.tv/pinstadium

Here some requested pics on Iron Man getting the Pin Stadium boost!

25D0847D-7331-437E-81C9-DA3C24964B96 (resized).JPG

After playfield view coming soon!!

And here are the "After" results of the Pin Stadiums lighting up this artwork to vivid HD brilliant quality!

ironman_after (resized).png

Oh cool!!! I really love that machine and the one in the picture is mine before the Invisi-Shields were invented, hence being able to see the light source from the lower camera view.

Now that I have installed the Invisi-Shields that is no longer the case. I am happy to help you light up IMVE and do it even better justice. The UV+Glow on the drone targets is epic to say the least. So that will be your right ramp flasher that you connect to.

Several have asked for videos of them in action on IMVE. Here you go:

Here is the exact location to trigger from if you want the UV+Glow to ignite when the drone standup targets are hit! It’s the right ramp top flasher.

B7D10F1B-0E31-4CBA-B327-19C39DDBB62D (resized).jpeg

Here is a cool post to check out. Jeff from TWIP www.thisweekinpinball.com bought an AFMR and installed a set of the Pin Stadiums on it. Check out his comments on it here: https://bit.ly/2VLg52d

58761A70-0298-4309-947B-804C28017186 (resized).jpeg7246114E-FECC-470F-9356-F5033E6E6D45 (resized).jpeg49B25EA8-997F-4AE1-B337-EAC3799758DB (resized).png

This is a good example of the difference you can expect on JJP POTC. One of the top sellers for Pin Stadiums and such a great machine to play!

8366a0969af311fc6537031f091257ae42b38d20 (resized).png

It does "not" need a service port adapter, only CGC machines and most of the Bally/Williams WPC95 do need them. The Fusions have the Invisi-Shields built into it so you don't need to add anything when ordering the Fusions. It will have everything you need.

As part of a silent auction for Cycle for the Seas charity thanks to ASOA this ecstatic winner got his first Pin Stadiums and put them on a Flash Gordon. I helped him over the phone to install them. When they came on for the first time his reaction was priceless!

Check out these results on this beautiful 1981 Bally pinball machine. Classic machines will give you one of the most dramatic results even seen with Pin Stadiums.

Most of these older pins don’t have flashers but since you can trigger the Pin Stadium’s UV+Glow flasher with any bulb, you now have some.

He used the “3x” flasher inlay bulb in the center of the top circle of lights in the middle of the playfield. Wicked sweet!!

01D17A56-50B6-4979-97C0-69AC446366D8 (resized).jpeg7C88B268-6084-44B2-A464-A5CE9E2F6230 (resized).jpeg

A good side by side example here!

15A10C69-56FE-40E0-9124-BA5C8B19DB9E (resized).png

Here is a full list of Features & Benefits for Pin Stadiums. This will get updated to the website also.

Updated version:

comparison_chart_pinstadium_1250 (resized).png

Gift Cards are now available! https://pinstadium.com/product/gift-card/

pinball_lights_gift_card_1250e (resized).png

No hiccup just making a small run this week for my machines to test before they enter official production and I offer the first run.

IMDN with Pin Stadiums is a huge difference! UV-Glow I like to trigger from the Pharaoh flasher but some use either of the lighting bolts in the center of the playfield, shaker motor, Revive spinner flasher, and many more.

imdn_le (resized).jpeg

The Revive spinner is actually a really good spot as the flasher triggers every time there is a rotation with the spinner which makes it even more rewarding along with a super cool light show.

This is the most popular and recommended location for the Pin Stadium’s UV+Glow trigger “right eject”. In fact this is where I even suggest Dwight Sullivan to install them in his SWLE. Very cool!!

6ACB10D4-7362-49D5-B9AD-57B27E4AD700 (resized).jpeg

Here is a nice example of a normally very dark machine. STTNG is really showing up in this pic:

https://www.instagram.com/p/Bxt3zLvlqX0/?igshid=mnhpte3s52za

8C122182-3EFF-457F-B4B8-210C1779E72A (resized).png

EE81DEAF-CFFC-499B-8D34-F554F0246B66 (resized).png

For Dialed In a few have asked me where is the best location to trigger the UV+Glow from. The QED guy is the best location as every time you hit him it make an electrocution/zap sound and the UV fires off for a super nice light show!

Glad you mentioned this, the Hovers will have integrated into their design the ability to accept the Blur(diffuser) among other future Pin Stadium enhancements that come down the line in the future.

Basically you will be unlocking the next level of capabilities with the Hovers since it allows for many great things to come.

Here’s is another pitch black room pic of LOTR!

70A8712B-98A9-496F-A76F-9D4EE9FCA86B (resized).png

D8870CE6-1A94-451E-93FB-6BA841D597B9 (resized).png

The last few weeks have been very interesting and never would I have thought that the Pin Stadium products would have battled it out with each other, but take a guess who is now beating who?

comparison_fusion_psl (resized).png

fusion_orion_flare2 (resized).png

Both of course are great products and nothing will ever take away from that as you can't go wrong with either, but customers have spoken that feature rich products are what you guys want. Thank you all again for the tremendous support and there is innovation always on the horizon for your Pin Stadium products!

What I meant by this is that the Fusions have outsold the Pin Stadiums this month. The word is getting out now that a lot of Fusions are deploying into machines. Collectors are getting to see them in person!

Game of Thrones LE gets some fire on the castle walls and playfield!

87A3ED51-C354-4DF2-9FC9-6DEE22BDC45C (resized).jpeg

CB2A69ED-A77C-45A8-A596-065A676DA772 (resized).jpeg