Judge Dredd owners -
TLDR – Highly recommended. I am very happy with Pin Stadiums on my Judge Dredd. However, I needed an external power supply on my Pin Stadiums (which Scott quickly provided) because of my add-ons (ColorDMD, LED OCD boards) - otherwise I blew fuse F116. For the GI connection I used one of the GI lights under sling shot plastics. For the Flasher connection I used the Globe flasher.
I successfully installed Pin Stadiums with GI and UV options in my JD. Installing in JD was easier than my AFMr because there was more for the alligator clips to clip onto. For GI I connected to the exposed prongs on a GI bulb socket under the sling shot plastics. For Flasher I connected the Flasher clips to the Deadworld Globe flasher. For that, I started at connector J122 on the Planet Opto PC board located under the playfield under Deadworld and traced the blue and red wire to a connector that ran to the flasher in the globe (ref. pg. 3-7 in manual). It had a red-white wire (ground) in addition to the blue-red wire. I was able to connect using the included wire jumpers out of the socket. I was going to connect the flasher to the left ramp Police lights but felt that would be too distracting. The Globe blinks on and off at a more comfortable interval. Also, the Magnamount (magnetic strips) is very tight when raising and lowering the playfield but manageable.
As mentioned, I initially blew F116 but once I disconnected the Pin Stadiums from the Power Driver board and plugged it up to the service outlet, I was back in business again. The app is easy to use and offers a lot of color and pattern options. I now keep the room lights on dim when playing.
Scott was GREAT as has been said before. If I could request one thing from Scott it would be to include a Pin Stadium key chain or an attachment (like a ribbon with a small rubberband on one end) that can be put on the release lever to remind me to remove the light strips before raising the playfield.
Thanks and congrats on a great product!