Anybody have pictures of before and after of pinstadiums on Flintstones? Thank you!
Quoted from Jimmyhonda:Anybody have pictures of before and after of pinstadiums on Flintstones? Thank you!
I emailed a customer that I know has them installed on the Flintstones pinball machine and asked him to post up pics.
Quoted from pinstadium:I emailed a customer that I know has them installed on the Flintstones pinball machine and asked him to post up pics.
Thanks Scott!
Quoted from Jimmyhonda:Thanks Scott!
Anytime man! I installed a set myself at Expo 2018 last year and the results on Flintstones were phenomenal.
The UV+Glow looked excellent with the colors in the artwork on that machine.
I should have taken a picture for you but since you have about 10 sets of them I’m sure your imagination can run wild with what it would look like.
Quoted from joefox22:Elvira House of Horrors[quoted image][quoted image]
Looking mighty fine and thanks for sharing these. Elvira House of Horrors pinball has been very popular with the Pin Stadiums and your pics surely demonstrate why!!
Quoted from T3quila:Does pin stadium and hovers work for Oktoberfest? I would love to brighten up the lower playfield, the art is so pretty and you can barely see it. Where would you connect it to with the clips? I'm a noob so I don't really have a good idea how to go about it with the new led games and the videos show older games that have the lugs to clip to instead of the little led boards.
Thanks and happy turkey day!
You Pin Stadiums for Oktoberfest are on their way and should arrive shortly. For anyone that was not able to take advantage of the Black Friday sale like you did, then here is your LAST CHANCE for a Cyber Monday special. This is it folks!!!
$40 off Pin Stadiums and Omegas
$60 off Fusions
15% off Accessories Sitewide
Shop Now-> https://pinstadium.com/product-category/pin-stadium/
--
Scott
Pin Stadium
www.pinstadium.com
Quoted from Dazz:Anyone happen to have easy clean install instructions of Pinstadium lights on Spooky Pinball Alice Cooper Nightmare Castle? Can’t seem to be able to figure out the best way to install and power the lights.
One thing to mentioned about any of the Spooky installs with Pin Stadiums is that they do not have a service port in their machines. So the solution for this is that you will simply run the Pin Stadium power supply from your wall to the inside if the cabinet. See picture with the red arrow showing the end that you will run into the cabinet.
You can do that either through the screen in the bottom or even better between the backbox where it meets the cabinet in the back in the hinged area. If you do the screen it has a small staple that you generally have to remove so the backbox is best. I have updated this on the website also under Step 1/Spooky https://pinstadium.com/installation-instructions-pin-stadiums/
If anyone has any questions about ACNC please feel free to reach out to me [email protected]
Exceptional results on this machine, just ask any ACNC owner that has installed the Pin Stadiums on it.
Remember that the Blue and White GI cable connection always goes in the center and the UV+Glow flasher Red and Green wires goes on the end of the GI module (this tip is for every machine not just ACNC)
IMPORTANT: Keep in mind that this evening there only a couple hours of the Cyber Monday special remaining. Christmas can come early for you!!
======
Use code "cyber19"
======
led_pinball_light_bulbs_cyber19 (resized).png
Quoted from Aurium:Alice pics...[quoted image][quoted image][quoted image]
That’s seriously a beautiful setup that you have in the app. Can you share a screenshot of your settings for us all?
Quoted from VillaThrills:Don’t know that we had a pic of the new Omegas up close. Slightly wider than the regular Pinstadiums but not as wide as the Fusions. These will be going into my Jurassic Park Premium shortly.[quoted image]
Yes that’s great you posted these up and is a nice visual on them. They are slightly wider but not by much so that they will clear on your machines.
Quoted from pinstadium:That’s seriously a beautiful setup that you have in the app. Can you share a screenshot of your settings for us all?
Here you go guys! It really is night and day with the fusions on!
7CE7BD7E-D862-4DAD-9032-E001D200B0CF (resized).pngQuoted from Aurium:Here you go guys! It really is night and day with the fusions on![quoted image]
I really appreciate you sharing this! By the way I see that you still have your Pin Stadium named “Controller*****”.
Fun tip!! If you go back to the Main Menu that if you do a “long press” on the name “Controller****” and select “Rename Pin Stadium” and change it to your machine name. Here is an example of how it would look on Jurassic Park Limited Edition.
DC966A8B-0453-4CDB-AB1B-66A955296F24 (resized).jpeg
Quoted from pinstadium:I really appreciate you sharing this! By the way I see that you still have your Pin Stadium named “Controller*****”.
Fun tip!! If you go back to the Main Menu that if you do a “long press” on the name “Controller****” and select “Rename Pin Stadium” that you can change it to your machine name. Here is an example of how it would look on Jurassic Park Limited Edition.[quoted image]
Are those the recommended settings for jple?
Quoted from estrader:Are those the recommended settings for jple?
Yes you got it!!
Quoted from pinstadium:I really appreciate you sharing this! By the way I see that you still have your Pin Stadium named “Controller*****”.
Fun tip!! If you go back to the Main Menu that if you do a “long press” on the name “Controller****” and select “Rename Pin Stadium” and change it to your machine name. Here is an example of how it would look on Jurassic Park Limited Edition.
[quoted image]
Awesome!!! Good tip as I just got my order from you for my new Elvira so it would be great to have them named to each game. Thanks!!
Quoted from Aurium:Awesome!!! Good tip as I just got my order from you for my new Elvira so it would be great to have them named to each game. Thanks!!
Oh that’s perfect timing to know this trick. That is how you will be able to keep them organized on the app. Thank you for your multiple orders!!
Quoted from VillaThrills:Omegas on a Jurassic Park Premium. Flasher hooked to the shaker motor worked well so far.
[quoted image][quoted image]
Looks incredible and the Omegas have been super popular with Jurassic Park. I am sure many others wanted to see what they look like on this machine. WOW!!
Check them out here: https://pinstadium.com/product/pin-stadium-pinball_led_lights_omega/
pinball_mods_jurassic_park_pinball (resized).pngQuoted from JimFNB:D’oh I almost posted about the blur not working and what’s up with the pinstripe effect on that JP but then I zoomed in and realized it’s a sticker on the machine.
Looks great! Looking forward to blur being available as an add-on for the hovers!
That’s hilarious and what’s even more exciting/ironic is that now the machine is striping and not the Pin Stadiums. The Future is Here!!
Quoted from Aurium:Awesome!!! Good tip as I just got my order from you for my new Elvira so it would be great to have them named to each game. Thanks!!
Let is know what settings your ended up using on Elvira as it can help others that are installing them on that machine. You’ve got some good settings going and it’s always nice to see what others suggest.
Quoted from VillaThrills:Omegas on a Jurassic Park Premium. Flasher hooked to the shaker motor worked well so far.
[quoted image][quoted image]
It’s important to note that I have done some testing and I suggest triggering the UV+Glow flasher for the T-Rex ramp is a really great spot for the Pin Stadiums. I had a few inquire this weekend as there are a lot of JP owners installing them. I hope this helps. It’s the flasher under the left ramp #172 in the settings.
1795DD35-6DE7-471F-BD38-1139B7F16924 (resized).jpeg3FA8CC29-2941-4E7A-B093-31DEC66C958B (resized).jpeg
Late coming to the party, is there a feature matrix I can look at somewhere for the product lines? My main question is what's the difference between the standard and xstream? What do I lose with the xstream (assuming because it's less exoensive.)?
Xstreams mount to the outside of the game and are only white light and aren’t tied to anything. Just on or off and brightness control.
Quoted from Matt_Rasmussen:Late coming to the party, is there a feature matrix I can look at somewhere for the product lines? My main question is what's the difference between the standard and xstream? What do I lose with the xstream (assuming because it's less exoensive.)?
The X-Streams are specifically designed just for streamers and as @chuckwurt said basically if you are a collector then you want the regular Pin Stadiums:
https://pinstadium.com/product/pin-stadium-lights/
or for the ultimate light show the Fusions:
Quoted from marspinball:What's the best location to mount the UV flasher for Twilight Zone?
The upper right flasher I have found to be the best for the Twilight Zone pinball machine. If you go into Settings/Lamps/Flashers it’s this one.
E7C96A59-8C85-4892-898B-FBAE43833AA4 (resized).jpegQuoted from Clint12:My woz yellow brick road isn’t bright enough do u have a kit?
Yes WOZ is one of the best sellers for Pin Stadiums. Even Jack from Jersey Jack loves them on his machine. Here is the link and just be sure to specify you have a WOZ: https://pinstadium.com/product/pin-stadium-lights/
I will send you everything you need. There is a special adapter I make for the flasher for WOZ to make the install easier.
F3233883-6F36-4427-90A1-8C3E652921DD (resized).jpeg1C3DDB3D-F5D4-4CB4-B20F-F82E8FFC74C3 (resized).jpegQuoted from marspinball:What's the best location to mount the UV flasher for Twilight Zone?
I snapped some pics of the flasher I am referring to so that you can visually reference it on the playfield. It’s in the very back right corner. Very cool results!
E4B64838-744C-4E52-BB7B-8F4F37B22DEC (resized).jpegB6F2A7DF-CC79-4C83-B88B-8CC4709D22DE (resized).jpegWondering if anyone has hooked up the Pinstadium fusions up to a Wonka? Looking for best wiring locations to make this baby shine!
Yes under Step 1/JJP are the instructions for Wonka. Lots of Willy Wonka collectors are installing them with phenomenal results!!
You will trigger that GI from the Wonka Vision and the UV+Glow from the shaker motor
36584305-C388-4CD1-AB42-12C4BF29F146 (resized).jpeg40926643-9BF9-4C64-B1B4-E2BE27B15B30 (resized).jpeg07B0C612-E466-4369-B119-A413A831AD5C (resized).pngBDA18989-BE8E-4F9F-8E4F-DF7ADED04DE3 (resized).pngQuoted from heyitsjoebob:I was just on the website to order some new magna mounts now that my JP is on the way, and I see there's a Hover option now. Is that the way to go since I'll have art blades that I won't want to mess up with the stick ons?
They Hovers will allow you to mount the Pin Stadiums to the playfield so you don’t have to remove them when raising it. Most install the Pin Stadiums the way they come without Hovers as it’s a much cleaner look if you have artblades. They work well with them. But it’s personal preference.
That’s my personal recommendation as I don’t mind removing the lights (with the Magna-Mount system it’s super easy) when raising the playfield for the better appearance and display of the art blades. I hope this helps.
Quoted from pin2d:Just installed on ACNC along with some Voodoo glass!! Glorious[quoted image][quoted image]
Oh man that’s really awesome and such a transformation. I love seeing that artwork displayed so nicely. Thanks Jeff for your order and support. ACNC in person with the Pin Stadiums is a dazzler first sure. Wow!!
Check out this Spooky TNA live motion!
https://instagram.com/p/B54VejeH_UD/
3AD8B8EA-3064-419E-BB5F-523783E4B936 (resized).pngQuoted from pinstadium:They Hovers will allow you to mount the Pin Stadiums to the playfield so you don’t have to remove them when raising it. Most install the Pin Stadiums the way they come without Hovers as it’s a much cleaner look if you have artblades. They work well with them. But it’s personal preference.
That’s my personal recommendation as I don’t mind removing the lights (with the Magna-Mount system it’s super easy) when raising the playfield for the better appearance and display of the art blades. I hope this helps.
Time for some clear plastic Hovers!
Quoted from SeaLawyer:Time for some clear plastic Hovers!
I’m working on something even better
Quoted from pinstadium:I’m working on something even better
Actually hovering light bars would be awesome!
I can hear the discussion:
Alien 1: So they invented a portable anti grav drive.
Alien 2: What? So, we have to watch out because they are colonizing space with that? Better get the defenses ready, mobilize...
Alien 1: Calm down! No, don't worry, they use it to illuminate a toy that shoots little steel balls around in a box.
PSA: Scott at Pin Stadium is Best-in-Class in responsiveness and customer service. Thanks, Scott !!!
Quoted from Olddragon:PSA: Scott at Pin Stadium is Best-in-Class in responsiveness and customer service. Thanks, Scott !!!
You are always welcome and I’m excited to hear your impression of the Fusions on your MMR. It’s a very popular and high performing machine with the Fusions. Looking forward to the moment you first play a game with them installed.
Quoted from T3quila:Actually hovering light bars would be awesome!
I can hear the discussion:
Alien 1: So they invented a portable anti grav drive.
Alien 2: What? So, we have to watch out because they are colonizing space with that? Better get the defenses ready, mobilize...
Alien 1: Calm down! No, don't worry, they use it to illuminate a toy that shoots little steel balls around in a box.
Love it!! That’s hilarious
Quoted from LOTR_breath:Omega's on Hoops. First two pics are without and with Omega's and the room lights are off. Last pic is with Omega's on and room light also on. The UV flasher is tied to the spinner and it is pretty awesome!
[quoted image][quoted image][quoted image]
Sweet! Dibs on that hoops when you’re done! Haha
Quoted from DustinP:Guys,
I’m very impressed with difference the Pin Stadiums made on my Munsters. Before and after pics:[quoted image][quoted image]
I really enjoy seeing this machine with the Pin Stadiums. The Franchi artwork is just beautiful!!
At Expo this year he was next to me in the booth and said he was super impressed with them on the Munsters LE we had in the Pin Stadium booth. Franchi approves them on his own artwork, can’t beat that!!
886141F8-11B0-43AB-9316-FD12E1FE3C9A (resized).jpegB032C17C-FC89-4460-ABFA-B76D43B1FF77 (resized).jpegEABC0F48-B652-40CD-A282-A13DFA7F87D0 (resized).jpegWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-pin-stadium-lights-official-announcement/page/114?hl=dustinp and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.