Quoted from Aurich:My TNA had pooling around the slingshot posts, not sure Spooky has magic nobody else has figured out either.
Spooky and AP use Bader now. That appears to be the difference between them and the companies having playfield issues.
You're currently viewing posts by Pinsider chuckwurt.
Click here to go back to viewing the entire thread.
Quoted from Aurich:My TNA had pooling around the slingshot posts, not sure Spooky has magic nobody else has figured out either.
Spooky and AP use Bader now. That appears to be the difference between them and the companies having playfield issues.
Company.
I believe stern and mirco do direct print while Bader and CPR do screen print for the most part.
Quoted from Aurich:I have no info to base any suspicions on, but I always figured the pressure of keeping lines moving was making companies not wait for the clear to properly cure before assembling.
Cure time cannot be the issue. JJP playfields have to cross an ocean before they get to JJP. More than enough time to cure.
Quoted from ViperVS:If the printer/ink is the issue, howcome half of the JJP playfields have been perfectly fine?
Mirco has a 50% success rate.
Quoted from RyanStl:Is there any way the shipping over sea messes with the playfields while they are curing?
Doubtful. Stern has the same issues and I’m pretty sure all theirs are from USA.
Quoted from ViperVS:Wasn't Mirco 1 of the three playfield (art+clear) contractors for Stern? That would explain some lemons from stern as well.
I believe mirco has confirmed in the past they don’t make playfields for stern.
You're currently viewing posts by Pinsider chuckwurt.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-mirco-quality-control-procedures?tu=chuckwurt and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.