Saint Paul, MN
I like these cuz I have a dumb phone and can't use the app with the other ones. I wish you offered a dimmable upgrade, you know one stop shopping and all.
(Topic ID: 210784)
You're currently viewing posts by Pinsider mustangpaul.
Click here to go back to viewing the entire thread.
This topic is closed.
Quoted from HemiOrange09:If anyone has any questions, just let me know.
Yes, are you going to sell them with that fader that was posted above? One stop shopping and one shipping cost. That's what it really needs. 
Quoted from HemiOrange09:Yes.... This has been requested and I can / will be adding a "low tech" fader controller as an optional upgrade for this mod. Also I am testing a high tech smart phone / I-phone Wi-Fi RGB controller as well.... These all will be an "optional upgrade" for the base lighting rails, so if you just want the rails without all of the Hi-Tech toys you can get it.
That would be great, I have a dumb phone so I'd go the low tech route. I also wouldn't need the power connector on the end cuz I have an 12v, 8 way power splitter drawing power from the service outlet via a 3 amp wall wart in my games for mods.
Quoted from HemiOrange09:No problem. I can make you this mod with the "low tech" dimmer control option with straight wires (no connector) to connect to your power source. How long do you need the harness?...
I'll have these dimmers in stock in about a week. I will be adding these options to my website today if you would like to place an order.
Thanks,
Steve
MI Pinball Refinery
My splitters are on the right side of the cabinet just a little forward of the cab speaker so I'm thinking 3 feet maybe. Is the original connector a Molex 3 pin female? The splitters are male connectors.
Quoted from pin15:Great work Steve. Thanks again for coming out and helping me get these awesome rails installed in my games.
One quick note for potential customers. The pictures of my games make the playfield look little more washed out then it is in reality. I’m very careful to avoid that. I like to try keep the colors as true as possible. Again it’s typical case where pictures don’t do it true justice.
Also I can see why a dimmer on some games would be nice to get that perfect lighting effect.
Not to nitpick but the 3rd picture doesn't look right, the area to the right of the lcd on the pf still looks as dark as stock. 
Quoted from Yelobird:I’m probably wrong but I believe that’s cause this is one of Steve’s Custom systems with blacked out ramps and wire forms ?
Hmmmmmmm.
You're currently viewing posts by Pinsider mustangpaul.
Click here to go back to viewing the entire thread.
This topic is closed.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
