You're currently viewing posts by Pinsider Fytr.
Click here to go back to viewing the entire thread.
This topic is closed.
A few questions:
Are the white $40 strips using WRGB led strips or just White ones?
Is there anyway to control the brightness and/or color shade (if they are wrgb)?
For the $95 color changing ones how would you set the shade you want if you want it always be a specific shade? Or is it just full red, blue, green, or white?
Quoted from HemiOrange09:To snswer your questions...
The white version are RGB strips that I jumper all the colors together to make a white LED color. Its just easier this way. I would have to put them on a controller of some sorts to control them. I'm looking into this as well to allow them to be able to be dimmed. This will be a different controller all together for what I'm currently offering.
Yes there are seveal modes to the sound controller that allow you to control the LEDs. So it will change the color if the controller hears something or you can have it fade between colors or just leave 7 different colors on full or your choice on all the time. But it does not have a brightness dimmer on it.
Thanks for quick response.
My experience has been that you'll certainly want to be able to control the brightness somehow, even if it's a simple rotary dial under the PF somewhere.
You're currently viewing posts by Pinsider Fytr.
Click here to go back to viewing the entire thread.
This topic is closed.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-mi-pinball-refinery-gi-lighting-rail-for-all-makes-of-pinball?tu=Fytr and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
