New LED Leg Light-Ups.

I just place my ad in the Market Place for my Leg Light-Ups. Plug-n-Play for newer Stern games with the 12/5v plug under the shooter. The kit contains 2 clear cabinet leg protectors with bright led strips imbeded in them, 2 felt protectors cut to a special shape with aluminum tape applied to one side and a power wire, the 2, LED Leg Light-Ups are wired together. Those 2 wires are run up through the cabinet speaker grill where they are plugged into one wire going to the power wire under the shooter. I hav had them on some of my games for months and have had zero problems so they have been well tested.

These will work in a game I you have a service outlet in the cabinet also. You can buy a 12v converter wall wort, put a 3 pin (only the left and right pins are used for 12v and is not supplied with the kit, and replace the converter plug with that and plug the converter into the service outlet. To turn on and off just unplug the converter from the service outlet. I've added a picture of my "LED Leg Light-Ups showing them on my BOP with this set-up and it works great but I don't have purple in stock yet.

Plug-n-play for Stern Spike is not supported at this time . Sorry But if your handy you can figure that out.

With Beatmasters Shooter Housing Light Up the front of your game will REALLY light up with color.

The price for the kit is $85 with FREE USPS First Class with tracking shipping to the lower 48

In stock I have,

12 blue
10 red
5 amber

If you have questions post um here or pm me.

Thanks,

MustangPaul

here are some pictures

IMGA0160[1]_(resized).JPG
IMGA0402[1]_(resized).JPG
IMGA0411[1]_(resized).JPG
IMGA0179[2]_(resized).JPG

Post last edited 7 years ago.

#2 7 years ago

PAB

MustangPaul

Reserved.

Update:

7 blue
9 red
4 amber

Post last edited 7 years ago.

#3 7 years ago

PAB

MustangPaul

Reserved

#4 7 years ago

LTG

Pinside member

Hopkins, MN

11y 176K 53,776 23 7

Those look cool. Great idea Paul !
LTG : )

#5 7 years ago

PAB

MustangPaul

Thanks Lloyd. They look sooooo much better in real life with room lights on or off.

#6 7 years ago

BOB

beatmaster

Mods for your pinballs

Beauharnois

11y 102K 7,384 7 17

these look great paul.

congrats on a great first official mod.

thanks for the kind words about my shooter housing lighting kit.

#7 7 years ago

ASS

guyincognito

Inactive member

10y 61,800 1,353

Those look sharp!
Nice arcade carpet also.

#8 7 years ago

MVP

Grizlyrig

Pinside+ Frequent

8y 111K 3,287

Gonna have to show my wife this! Two thumbs up from me.
Mike

#9 7 years ago

ROD

BoozeMarlin

Pinside member

Birmingham, AL

9y 71,900 1,121 1 27

So the last pic is of the Amber?

#10 7 years ago

ART

OLDPINGUY

Arts Arcade

11y 170K 12,472 7

Looking Great!, Paul!

#11 7 years ago

ROK

Rock914

Rock Custom Pinball

Wayland, MI

10y 90,900 2,148 7

Nice work Paul!

#12 7 years ago

COS

cosmokramer

Inactive member

10y 112K 8,268

Great job buddy

#13 7 years ago

BOB

beatmaster

Mods for your pinballs

Beauharnois

11y 102K 7,384 7 17

can't wait to see what amber is gonna look like.

#14 7 years ago

PAB

MustangPaul

Quoted from beatmaster:
these look great paul.
congrats on a great first official mod.
thanks for the kind words about my shooter housing lighting kit.

Thanks for the "push" Bob. Our 2 mods really light up the front of an otherwise dark and forgotten front of the cabinet. Now I just need a chrome coin door on Avatar and watch how our light up reflect off of it.

#15 7 years ago

PAB

MustangPaul

Quoted from guyincognito:
Those look sharp!
Nice arcade carpet also.

Thanks and the carpet is black light "Under the Sea" with memory foam padding. I love it.

#16 7 years ago

PAB

MustangPaul

Quoted from Grizlyrig:
Gonna have to show my wife this! Two thumbs up from me.
Mike

Thanks, they would look great on some of your games.

#17 7 years ago

PAB

MustangPaul

Quoted from BoozeMarlin:
So the last pic is of the Amber?

No they are purple, it's a impossible color to get right. This was the best I could find with the special led strips used in my mod....and my camera isn't very good, all the Leg Light-Ups look better in real life.

#18 7 years ago

PAB

MustangPaul

Quoted from OLDPINGUY:
Looking Great!, Paul!

Thanks Art, it was a long time in development. But the final product turned out real nice.

#19 7 years ago

PAB

MustangPaul

Quoted from Rock914:
Nice work Paul!

Thanks Rock.

#20 7 years ago

MOD

modfather

ModFather Pinball Mods

Sunrise, FL

9y 91,150 1,883 8 83

You can easily use these on Spike games, just buy the adapter from Mezel. It has an in line fuse, it plugs into the ticket dispenser on the board on the left side of the game. It supports 12 volts, you should be good to go. Need a tester to make sure?? Happy to do it for you.

#21 7 years ago

PAB

MustangPaul

Quoted from cosmokramer:
Great job buddy

Thanks cosmo.

#22 7 years ago

MPV

BenetBoy78

Pinside member

11y 104K 1,036

Now that was a bright idea! Very nice!!

#23 7 years ago

MDS

Pinside member

10y 73,900 932 4 22

Great idea--well implemented!

#24 7 years ago

DRA

Grinder901

Inactive member

Can't wait for mine!!

#25 7 years ago

DMS

Elevatorman

Premier Pinball Stl

St. Louis, MO

9y 109K 1,849 70 169

Looks awesome Paul!
Do you have any plans to make green for a WOZECLE?
I'd love to add those to it when I get my WOZ in about a month.

#26 7 years ago

FAZ

pinball_faz

Pinside member

Chicago Burbs, IL

12y 99,300 2,734 5 32

Very cool!

Hmm... I've seen:
Under cabinet lights
Lights inside the leg bolts
Added to the playfield
Added to the backbox
Now under the legs

What??! No induction / motion charged LED balls? Not glow in the dark... but a real battery powered with a recharger.

Throw-down Challenge....ready....set... GO!

faz

#27 7 years ago

PAB

MustangPaul

Quoted from modfather:
You can easily use these on Spike games, just buy the adapter from Mezel. It has an in line fuse, it plugs into the ticket dispenser on the board on the left side of the game. It supports 12 volts, you should be good to go. Need a tester to make sure?? Happy to do it for you.

Thanks Chuck, all ready have one and it does work.

#28 7 years ago

PAB

MustangPaul

Quoted from Grinder901:
Can't wait for mine!!

Yes, your getting an amber for your IMVE. Post a picture when you put it on.

Post last edited 7 years ago.

#29 7 years ago

MOD

modfather

ModFather Pinball Mods

Sunrise, FL

9y 91,150 1,883 8 83

no problemo

#30 7 years ago

DRA

Grinder901

Inactive member

OP
Quoted from MustangPaul:
Yes, your getting and amber for your IMVE. Post a picture when you put it on.

Yes sir of course

#31 7 years ago

PAB

MustangPaul

Quoted from pinball_faz:
Very cool!
Hmm... I've seen:
Under cabinet lights
Lights inside the leg bolts
Added to the playfield
Added to the backbox
Now under the legs
What??! No induction / motion charged LED balls? Not glow in the dark... but a real battery powered with a recharger.
Throw-down Challenge....ready....set... GO!
faz

Yup that about covers it. But you forgot beatmasters light up shooter housing and someones light up shooter knob. I saw a "need" and made it.

I think that Challenge is a bit beyond today's tech. But very interesting none the less.

#32 7 years ago

PAB

MustangPaul

Quoted from Elevatorman:
Looks awesome Paul!
Do you have any plans to make green for a WOZECLE?
I'd love to add those to it when I get my WOZ in about a month.

Yup, have green led strips and could make 1 or 2 now. They will look GREAT on WOZECLE.

#33 7 years ago

DMS

Elevatorman

Premier Pinball Stl

St. Louis, MO

9y 109K 1,849 70 169

OP
Quoted from MustangPaul:
Yup, have green led strips and could make 1 or 2 now. They will look GREAT on WOZECLE.

I'll hit you up as soon as I have the machine.
Thanks!

#34 7 years ago

PAB

MustangPaul

Climate Controlled Sfba, CA

Quoted from Elevatorman:
I'll hit you up as soon as I have the machine.
Thanks!

OK.

#35 7 years ago

DEL

SealClubber

Pinside Moderator

13y 126K 11,033 244

These would look good on my Tron since I have the lighted trim and buttons. Too many good things vying for my money right now.

#36 7 years ago

SPC

blownfuse

In Memoriam

11y 69,550 2,986 70

You forgot one. LED's installed in the legs.

Steve

Quoted from pinball_faz:
Very cool!
Hmm... I've seen:
Under cabinet lights
Lights inside the leg bolts
Added to the playfield
Added to the backbox
Now under the legs
What??! No induction / motion charged LED balls? Not glow in the dark... but a real battery powered with a recharger.
Throw-down Challenge....ready....set... GO!
faz

#37 7 years ago

PAB

MustangPaul

Quoted from SealClubber:
These would look good on my Tron since I have the lighted trim and buttons. Too many good things vying for my money right now.

You bet they would....along with beatmasters shooter light up, just like my Avatar LE picture. I hear ya about the money though.

#38 7 years ago

PAB

MustangPaul

Climate Controlled Sfba, CA

Quoted from blownfuse:
You forgot one. LED's installed in the legs.
Steve

While not "in the legs" on my BOP pictured above the purple led strip from my Leg Light-Ups continue all the way down to the leg foot on the back of each leg.

#39 7 years ago

FAZ

pinball_faz

Pinside member

Chicago Burbs, IL

12y 99,300 2,734 5 32

Quoted from blownfuse:
You forgot one. LED's installed in the legs.

Steve

You are correct.... but honestly, I was bewitched by the LEDs in the leg bolts... all else was flushed. The leg LEDs were very cool too.

I still think the glow-ball is possible.

faz

#40 7 years ago

SPC

blownfuse

In Memoriam

11y 69,550 2,986 70

I would have posted a YouTube link to the LED legs but this isn't my thread to do so. If you say it's okay Paul, I'll add the link to my post above. I'm not selling anything, just having pinball fun.

Steve

OP
Quoted from MustangPaul:
While not "in the legs" on my BOP pictured above the purple led strip from my Leg Light-Ups continue all the way down to the leg foot on the back of each leg.

#41 7 years ago

PAB

MustangPaul

Quoted from pinball_faz:
I still think the glow-ball is possible.

Mmmmm I don't know.

#42 7 years ago

PAB

MustangPaul

Quoted from blownfuse:
I would have posted a YouTube link to the LED legs but this isn't my thread to do so. If you say it's okay Paul, I'll add the link to my post above. I'm not selling anything, just having pinball fun.
Steve

I would have but I don't do utube...I'm to low tech. I'd rather just keep my topic free of that but thanks for the offer.

#43 7 years ago

PAB

MustangPaul

1 blue sold today...9 left.

#44 7 years ago

DRA

Grinder901

Inactive member

My Amber lights have arrived. I'll put them on tonight

#45 7 years ago

PAB

MustangPaul

I GOTTA see this!!! I just finished a led mod for the Bat Plane on my Batman Forever.

IMGA0395[1]_(resized).JPG

IMGA0416[1]_(resized).JPG

IMGA0417[1]_(resized).JPG

IMGA0420[1]_(resized).JPG

IMGA0421[1]_(resized).JPG

#46 7 years ago

ART

OLDPINGUY

Arts Arcade

11y 170K 12,472 7

Nice, Paul.....!!

#47 7 years ago

PAB

MustangPaul

Thanks Art.

#48 7 years ago

FAZ

pinball_faz

Pinside member

Chicago Burbs, IL

12y 99,300 2,734 5 32

Very cool. I like the red
Faz

#49 7 years ago

DRA

Grinder901

Inactive member

Paul,

Can you provide some more detailed photos in your reserved posts showing the process of applying and putting the connector through the middle speaker?

Thanks man!

Ryan

#50 7 years ago

PAB

MustangPaul